2 layers71.9 × 19.6 mm
ControlWheel
mojo626/iPodClone
This is a clone of an iPod video based on the Allwinner V3s processor
14 parts
2 layers55 × 90 mm
IPodClone
mojo626/iPodCloneThis is a clone of an iPod video based on the Allwinner V3s processor
- Size
- 55 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 163
- Nets
- 187
- Pads
- 693
- Tracks, vias
- 1,560, 207
- Pours
- 694
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 May 2025
- Updated
- 23 May 2025
Overview
IPodClone is an open-source printed circuit board by mojo626, from the mojo626/iPodClone repository on GitHub. It is a 2-layer board of 55 × 90 mm with 163 parts on 187 nets, routed with 1,560 tracks and 207 vias.
It is built around the V3S, ESP32-MINI-1-H4 and F35SQA512M-WWT, with the MT3608, PCM1807PW and SGTL5000XNAA3R2 among its other parts. Its parts include 78 capacitors, 36 resistors, 10 ICs, 5 switches and 4 inductors. It belongs with the ESP32 boards of this library.
Main components
12
V3S
LQFP-128-EP(14x14)-20℃~+70℃ 1.2GHz 32 Bit 6bit ARM Cortex-A7 Built-in+External External LQFP-128-EP(14x14) Microcontrollers (MCU/MPU/SOC) ROHSAllwinner TechMicrocontrollers (MCU/MPU/SOC)
ESP32-MINI-1-H4
SMD-55P-40℃~+125℃ -98dBm 13dBm 2.3V~3.6V 2.4GHz 240mA 95mA Bluetooth4.2 ESP32-U4WDH Chip On-board PCB Antenna UART、SDIO、SPI、I2C、I2S SMD-55P WiFi Modules ROHSEspressif SystemsWiFi Modules
F35SQA512M-WWT
WSON-8-EP(6x8)-40℃~+85℃ 10 Years 100,000 cycles 10uA 133MHz 2.7V~3.6V 2ms 350us 512Mbit SPI WSON-8-EP(6x8) NAND FLASH ROHSFORESEENAND FLASH
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
PCM1807PW
TSSOP-14-40℃~+85℃ 1uA 2 2.5V 2.7V~3.6V、4.5V~5.5V 24 96000Hz Audio Analog-to-Digital Converter SPI TSSOP-14 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
SGTL5000XNAA3R2
QFN-32(5x5)-40℃~+85℃ 1.1V~2V、1.62V~3.6V 8kHz~96kHz Built-in phase-locked loop、On-chip digital gain、Mute control Encoder/decoder I2S、I2C、SPI QFN-32(5x5) Audio Interface ICs ROHSNXP SemiconductorsAudio Interface ICs
BQ24074RGTR
QFN-16-EP(3x3)-40℃~+125℃ 1 1.5A 4.2V 4.35V~10.2V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
EA3036CQBR
WQFN-20-EP(3x3)WQFN-20-EP(3x3) Power Management - Specialized ROHSeveranalogPower Management - Specialized
AFC01-S45FCA-00
SMD,P=0.5mm,卧贴0.3mm 0.5mm 2mm 45P Bottom Contact Copper alloy Hinged Lid Surface Mount, Right Angle Tin SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSJUSHUOFFC, FPC (Flat Flexible) Connector Assemblies
FPC-05F-6PH20
SMD,P=0.5mm,卧贴-25℃~+85℃ 0.3mm 0.5mm 2mm 500mA 50V 6P Bottom Contact Hinged Lid Phosphor bronze Surface Mount, Right Angle Tin SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSXUNPUFFC, FPC (Flat Flexible) Connector Assemblies
MMBT2222ALT1G-CN
SOT-23SOT-23 Bipolar (BJT) ROHSChipNoboBipolar (BJT)
PJ-342
SMD-30℃~+70℃ 3.5mm Headphone Jack 30V 500mA Copper Gold SMD Audio Connectors ROHSSHOU HANAudio Connectors (Headphones)
README
MainBoard/README.mdiPodClone
This is a clone of an iPod video based on the Allwinner V3s processor
Features include:
- Allwinner V3s processor
- 1.54" TFT LCD
- ESP32 for WiFi and Bluetooth
- STGL5000 for wired headphone output
- 2500mAh battery
- microSD for music storage and filesystem
- NAND flash for boot
Parts
163| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C15, C16, C18, C19, C20, C21, C22, C23, C24, C30, C31, C33, C34, C35, C36, C37 +23 |
| 16 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C7, C9, C17, C45, C52, C53, C54, C58, C62, C66, C76, C78 |
| 12 | 10K | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R16, R19, R20, R25, R30, R31, R34, R42 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C13, C14, C25, C32, C51 |
| 5 | TS3735A 250GF 030 | easyeda2kicad:SW-SMD_4P-L3.7-W3.7-P2.70-LS3.7 | SW1, SW2, SW3, SW4, SW5 |
| 4 | 47K | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R24 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP8, JP9, JP10, JP11 |
| 3 | 1.5uH | Inductor_SMD:L_0402_1005Metric | L1, L2, L3 |
| 3 | 100K | Resistor_SMD:R_0402_1005Metric | R3, R5, R6 |
| 3 | 220pF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C10 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C26, C27, C46 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 1.0uF | Capacitor_SMD:C_0402_1005Metric | C40, C41 |
| 2 | 10M | Resistor_SMD:R_0402_1005Metric | R29, R33 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C38, C39 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C43, C49 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | 200K | Resistor_SMD:R_0402_1005Metric | R4, R28 |
| 2 | 220uF | Capacitor_SMD:C_1206_3216Metric | C11, C12 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C28, C29 |
| 2 | 2K | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 1 | 1.13K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1.18K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | 105164-0001 | easyeda2kicad:MICRO-USB-SMD_5P-P0.65-H-F_105164-0001 | USB2 |
| 1 | 15K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1769 | jst-1769:CONN_1769_ADA | J1 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C50 |
| 1 | 240 | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 4.7uH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 68K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 73.3K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | AFC01-S45FCA-00 | easyeda2kicad:FPC-SMD_AFC01-S45FCA-00 | X3 |
| 1 | BQ24074RGTR | easyeda2kicad:QFN-16_L3.0-W3.0-P0.50-TL-EP1.7 | U9 |
| 1 | BQ27220YZFR | easyeda2kicad:DSBGA-9_L1.7-W1.6-R3-C3-P0.50-BL | U4 |
| 1 | D | Diode_SMD:D_0603_1608Metric | D3 |
| 1 | EA3036C | easyeda2kicad:WQFN-20_L3.0-W3.0-P0.40-BL-EP | U6 |
| 1 | ESP32-MINI-1-H4 | easyeda2kicad:WIFI-SMD_ESP32-MINI-1 | U2 |
| 1 | F35SQA512M-WWT | easyeda2kicad:WSON-8_L8.0-W6.0-P1.27-BL-EP-1 | U10 |
| 1 | FC-12M32.768KHZ7PF20PPM | easyeda2kicad:FC-12M_L2.0-W1.2 | X1 |
| 1 | FPC-05F-6PH20 | easyeda2kicad:FPC-SMD_6P-P0.50_XUNPU_FPC-05F-6PH20 | FPC1 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | MMBT2222ALT1G | easyeda2kicad:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q3 |
| 1 | MT3608 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U7 |
| 1 | PCM1807PW | TI-PCM:PW14 | U8 |
| 1 | PJ-342 | easyeda2kicad:AUDIO-SMD_PJ-342 | CN3 |
| 1 | RED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | SGTL5000XNAA3R2 | easyeda2kicad:QFN-32_L5.0-W5.0-P0.50-BL-EP3.4 | U3 |
| 1 | TF PUSH | easyeda2kicad:TF-SMD_TF-PUSH | Card1 |
| 1 | V3S | easyeda2kicad:LQFP-128_L14.0-W14.0-P0.40-LS16.0-BL-EP5.0 | U1 |
| 1 | X322524MOB4SI | easyeda2kicad:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X2 |
| 1 | XC6206P302MR_C5148691 | easyeda2kicad:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | U11 |
Questions
How big is the IPodClone PCB?
It measures 55 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IPodClone use?
163 parts, built around the V3S, ESP32-MINI-1-H4, F35SQA512M-WWT and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IPodClone KiCad files?
From the mojo626/iPodClone repository on GitHub, at the commit this page was made from: the board is MainBoard/MainBoard.kicad_pcb and its schematic ControlWheel/ControlWheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IPodClone design in my own project?
Its repository states no licence, so its author keeps all rights: ask mojo626 before reusing the design.
More from mojo626/iPodClone
1Similar boards
- 2 layers40.5 × 58 mm
Initial v
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
30 parts1kApache-2.0 - 2 layers100.9 × 62.4 mm
- 4 layers150 × 137.1 mm
Controller
CircuitGuy943/Sabre-Integrated-flight-controller
(🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware
282 parts2GPL-3.0 - 2 layers99 × 99 mm
Quetzalcoatl
DiegoRosales/PCB_Designs
This repository contains some of the designs I've made. Everything here is Open Source Hardware
70 parts1 - 2 layers
- 4 layers66 × 42 mm
- 2 layers20 × 49 mm
Indicator fun V3s
vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s
168 parts2MIT - 4 layers73 × 66 mm
ORCA First Linux Board
Finn254254/orca-one
Proprietary hardware files, schematics, PCB design, documentation and bring-up work for the Orca One V1.0 SBC.
106 parts