2 layers55 × 90 mm
IPodClone
mojo626/iPodClone
This is a clone of an iPod video based on the Allwinner V3s processor
163 parts
2 layers71.9 × 19.6 mm
ControlWheel
mojo626/iPodCloneThis is a clone of an iPod video based on the Allwinner V3s processor
- Size
- 71.9 × 19.6 mm
- Copper layers
- 2
- Thickness
- 0.12 mm
- Parts
- 14
- Nets
- 35
- Pads
- 42
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 May 2025
- Updated
- 23 May 2025
Overview
ControlWheel is an open-source printed circuit board by mojo626, from the mojo626/iPodClone repository on GitHub. It is a 2-layer board of 71.9 × 19.6 mm with 14 parts on 35 nets.
It is built around the AI12. Its parts include 1 IC and 1 connector.
Main components
1README
MainBoard/README.mdiPodClone
This is a clone of an iPod video based on the Allwinner V3s processor
Features include:
- Allwinner V3s processor
- 1.54" TFT LCD
- ESP32 for WiFi and Bluetooth
- STGL5000 for wired headphone output
- 2500mAh battery
- microSD for music storage and filesystem
- NAND flash for boot
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | CapTouchPads:RoundPad | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 1 | AI12 | easyeda2kicad:SSOP-24_L8.8-W4.0-P0.64-LS6.2-BL | U1 |
| 1 | Conn_01x06_Pin | FlexPCB_FPC:6pin_0.5mm-Pitch | J1 |
Questions
How big is the ControlWheel PCB?
It measures 71.9 × 19.6 mm and has 2 copper layers, 0.12 mm thick.
What parts does the ControlWheel use?
14 parts, built around the AI12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ControlWheel KiCad files?
From the mojo626/iPodClone repository on GitHub, at the commit this page was made from: the board is ControlWheel/ControlWheel.kicad_pcb and its schematic ControlWheel/ControlWheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ControlWheel design in my own project?
Its repository states no licence, so its author keeps all rights: ask mojo626 before reusing the design.
More from mojo626/iPodClone
1Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
