2 layers91.3 × 60.7 mm
2 layers20 × 49 mm
Indicator fun V3s
vrubel/indicator-fun-V3s2"indicator.fun" device implementation on the processor Allwinner V3s
- Size
- 20 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 109
- Pads
- 670
- Tracks, vias
- 1,996, 252
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 May 2019
- Updated
- 31 Mar 2020
Overview
Indicator fun V3s is an open-source printed circuit board by vrubel, from the vrubel/indicator-fun-V3s repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 49 mm with 168 parts on 109 nets, routed with 1,996 tracks and 252 vias.
It is built around the V3S, CH340G and SGP30, with the LM1117-3.3, WS2812B and BSS138 among its other parts. Its parts include 76 capacitors, 39 resistors, 21 diodes, 8 ICs and 4 connectors.
Main components
8
V3S
LQFP-128-EP(14x14)-20℃~+70℃ 1.2GHz 32 Bit 6bit ARM Cortex-A7 Built-in+External External LQFP-128-EP(14x14) Microcontrollers (MCU/MPU/SOC) ROHSAllwinner TechMicrocontrollers (MCU/MPU/SOC)
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
SGP30
Gas sensor for indoor air quality applications. Datasheet: https://www.sensirion.com/file/datasheet_sgp30/SensirionUncategorised
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
CSTCE12M0G52-R0
SMD3213-3P-20℃~+80℃ 10pF 12MHz SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsEA3036QDR
QFN-20-EP(3x3)-40℃~+85℃ 1 2.7V~5.5V 40uA Lithium Battery Under-voltage lockout、Overcurrent Protection QFN-20-EP(3x3) Battery Management ROHSEveranalog IC designPMIC - Battery Management
README
README.mdindicator-fun-V3s
Device "indicator.fun" implementation on the processor Allwinner V3s
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C14, C15, C18, C19, C22, C27, C28, C50, C51, C52, C53, C57, C58, C62, C63 +7 |
| 20 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 18 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C7, C16, C29, C30, C32, C33, C35, C38, C40, C43, C44, C46, C56, C60, C66 +2 |
| 11 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C13, C17, C21, C39, C47, C54, C55, C59, C61, C64, C65 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R18, R19, R21, R38, R39, R44, R45 |
| 7 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C10, C11, C12, C41, C42, C45 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R9, R10, R56 |
| 3 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C31, C34, C49 |
| 3 | 150k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R54, R58 |
| 3 | 2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R25, R28, R30 |
| 3 | 33pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C23, C24, C26 |
| 3 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R11, R36 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22, R26 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C36, C37 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R17 |
| 2 | 2,2µH | indicator-fun-v3s:ODD-INDUCTOR | L3, L4 |
| 2 | 2k - 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R14 |
| 2 | 33 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R4 |
| 2 | 4.7pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C6 |
| 2 | 4R-NEXB38V | indicator-fun-v3s:EXB38V | RN1, RN2 |
| 1 | 0.22µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C76 |
| 1 | 1.2pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C48 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C25 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R23 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4 |
| 1 | 1pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 2.2nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 2.2µH | indicator-fun-v3s:ODD-INDUCTOR | L5 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R55 |
| 1 | 200k 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R27 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24 |
| 1 | 22µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C70 |
| 1 | 240 - 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | 25F32006WSOI | indicator-fun-v3s:SO08-EIAJ | U1 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16 |
| 1 | 32kHz | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Q2 |
| 1 | 4.7µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C20 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R57 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20 |
| 1 | AOut_1 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | AOut_1 |
| 1 | AOut_2 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | AOut_2 |
| 1 | AUDIO_JACK_SMD | indicator-fun-v3s:AUDIO_JACK_3.5MM_TRRS_SMD_RA | J2 |
| 1 | BOOT | indicator-fun-v3s:SW_SPST_SKQG_WithoutStem | SW2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | CSTCE12M0G52-R0 | indicator-fun-v3s:CSTCE12M0G52-R0 | X1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1 |
| 1 | EA3036 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U$4 |
| 1 | ELECTRET_MICROPHON-F6035AP | indicator-fun-v3s:F6035AP | MIC1 |
| 1 | LEDCHIPLED_0805 | indicator-fun-v3s:CHIPLED_0805 | LED2 |
| 1 | LIS2DH12TR | indicator-fun-v3s:LGA-12_1 | U6 |
| 1 | LM1117 | indicator-fun-v3s:SOT223 | IC1 |
| 1 | MD8002A | indicator-fun-v3s:SOIC127P600X175-8N | IC2 |
| 1 | Next LED | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | Power\Console | indicator-fun-v3s:USB-B-Micro | J4 |
| 1 | RTL8723BS | indicator-fun-v3s:LGA | U$2 |
| 1 | Reset | indicator-fun-v3s:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | Rohm BH1730FVC-TR | indicator-fun-v3s:SOP6_1 | U3 |
| 1 | SGP30 | indicator-fun-v3s:SGP30 | U5 |
| 1 | SWRA117D | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | ANT1 |
| 1 | Sensirion SHTC1 | indicator-fun-v3s:Sensirion-SHTC1 | U4 |
| 1 | TRANSFLASH-LOCK | indicator-fun-v3s:TRANSFLASH-LOCK-SOCK | J1 |
| 1 | USB OTG | indicator-fun-v3s:USB-B-Micro | J3 |
| 1 | V3S | indicator-fun-v3s:LQFP-128_14x14mm_P0.4mm | U$1 |
Similar boards
- 4 layers42 × 42 mm
Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14 - 2 layers67.5 × 77.5 mm
- 2 layers40 × 98 mm
- 2 layers72 × 121 mm
Teebeutel
entropia/Teebeutel-Hardware
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.
201 parts1 - 2 layers101.6 × 38.1 mm
- 2 layers94 × 96.5 mm
Esq1
FunPythonEC/ReactorArcV2
Proyecto para simular el reactor arc de iron man mediante un conjunto de leds WS2812 y un ESP32. El esquematico y los pcb estan realizados con kicad.
47 parts1MIT - 2 layers
Questions
How big is the Indicator fun V3s PCB?
It measures 20 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Indicator fun V3s use?
168 parts, built around the V3S, CH340G, SGP30 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Indicator fun V3s KiCad files?
From the vrubel/indicator-fun-V3s repository on GitHub, at the commit this page was made from: the board is Hardware/indicator-fun-v3s.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Indicator fun V3s design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).