Cherry PI Based On Allwinner V3S Chip
V3s is an open-source printed circuit board by jianjunjiang, from the jianjunjiang/cherrypi-v3s repository on GitHub. It is a 2-layer board with 37 parts on 165 nets, routed with 6 tracks and 0 vias.
It is built around the V3S and AXP203. Its parts include 23 capacitors, 8 resistors, 3 inductors, 2 ICs and 1 diode.
Cherry PI Based On Allwinner V3S Chip
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10uF | Capacitors_SMD:C_0603 | C1, C2, C3, C9, C10, C11, C15, C17, C18, C21, C23 |
| 6 | 4.7uF | Capacitors_SMD:C_0603 | C6, C8, C12, C13, C14, C16 |
| 3 | 1uF | Capacitors_SMD:C_0603 | C4, C5, C22 |
| 3 | 4.7uH | Pin_Headers:Pin_Header_Angled_1x02_Pitch1.00mm | L1, L2, L3 |
| 3 | R | Resistors_SMD:R_0402 | R1, R2, R3 |
| 2 | 10uF/NC | Capacitors_SMD:C_0603 | C19, C20 |
| 1 | 100R | Resistors_SMD:R_0402 | R4 |
| 1 | 104 | Capacitors_SMD:C_0603 | C7 |
| 1 | 1K | Resistors_SMD:R_0402 | R5 |
| 1 | 200K | Resistors_SMD:R_0402 | R6 |
| 1 | 30mR | Resistors_SMD:R_0402 | R8 |
| 1 | 47K | Resistors_SMD:R_0402 | R7 |
| 1 | AXP203 | Housings_DFN_QFN:UQFN-48-1EP_6x6mm_Pitch0.4mm | U2 |
| 1 | CHGLED | Diodes_SMD:D_0603 | D1 |
| 1 | V3S | Housings_QFP:LQFP-128_14x14mm_Pitch0.4mm | U1 |
JackkP/Semi-Truck-Backup-Camera
Repository for Team 25 Purdue ECE Senior Design Fall 2025 49022 Senior Design Project. This contains all of the code and schematics for the project. Course-related documentation is stored in google.
vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s
Finn254254/orca-one
Proprietary hardware files, schematics, PCB design, documentation and bring-up work for the Orca One V1.0 SBC.
mojo626/iPodClone
This is a clone of an iPod video based on the Allwinner V3s processor
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts, built around the V3S and AXP203. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jianjunjiang/cherrypi-v3s repository on GitHub, at the commit this page was made from: the board is hardware/v3s/v3s.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jianjunjiang before reusing the design.
