Skip to the content
4 layers34.4 × 57 mmSRF Pendants, the printed circuit board in 3D

SRF Pendants

modalexii/PCBs
Size
34.4 × 57 mm
Copper layers
4
Thickness
1.6 mm
Parts
23
Nets
36
Pads
106
Tracks, vias
201, 26
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
31 Jan 2022
Updated
31 Jan 2022

Overview

SRF Pendants is an open-source printed circuit board by modalexii, from the modalexii/PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 34.4 × 57 mm with 23 parts on 36 nets, routed with 201 tracks and 26 vias.

It is built around the ATMEGA328P-AU, XCL210C331GR-G and WS2812B. Its parts include 3 ICs, 1 resistor, 1 diode, 1 connector and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

23
QtyValueFootprintReferences
8C_SmallCapacitor_SMD:C_1206_3216MetricC-IN, C-OUT, C1, C2, C3, C4, C5, C6
2Battery_CellBattery:BatteryHolder_Keystone_3002_1x2032BT1, BT1
2VAL**SRF Pendants:snap-break-line-2.54mmbreak-line-2.54mm, break-line-2.54mm
2WS2812BLED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm+, D2
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1AVR-ISP-6Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ1
1DIODEDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD3
1FTDIHeaderConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalH1
1RResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1
1RF433-SYN480RSRF Pendants:RF433_SYN480RU3
1SW_SPSTSRF Pendants:UX0303_SPDP_SMD_SwitchSW1
1XCL210C331GR-GSRF Pendants:VREG_XCL220B283FR-GU2

The 22 most common of 23 parts.

More from modalexii/PCBs

7

Similar boards

  • 2 layers48.2 × 49.3 mmNixie pipe, the printed circuit board in 3D

    Nixie pipe

    tuna-f1sh/nixiepipe-hardware

    Hardware design files and firmware for my Nixie Pipe modules

    49 parts19
  • 2 layers150 × 150 mmBoardGame, the printed circuit board in 3D

    BoardGame

    jkordek1/Man-Don-t-Get-Angry-Board-game

    "Man don't get mad" - electronic board game

    218 parts5
  • 2 layers74.2 × 78.1 mmPcb main, the printed circuit board in 3D

    Pcb main

    h4ctar/retro-gauge

    Open Source Motorcycle Tachometer

    43 parts3GPL-3.0
  • 2 layers247.5 × 25 mmModule pcb, the printed circuit board in 3D

    Module pcb

    akaFunk/BlinkyBar

    Moduar LED light painting strip with 180 LEDs per meter

    106 parts1CC-BY-4.0
  • 2 layers57 × 78 mmCuebit, the printed circuit board in 3D

    Cuebit

    akita11/Cuebit

    micro:bitからCue:bitへのコマンド(通信プロトコル:UART 9600bps N81)は以下です。以下の"NNN"は数値(10進数)で与えるコマンドパラメータです。また各コマンドは行末コード(0x0d or…

    61 parts1MIT
  • 2 layers139.1 × 95.3 mmLightLetter W, the printed circuit board in 3D

    LightLetter W

    Dylanfg123/Light-Letters

    This project is a collection of PCB Letters with WS2812B lights on them. ATMEGA328P based design.

    78 parts
  • 2 layers42 × 13 mmUniverseSplitter, the printed circuit board in 3D

    UniverseSplitter

    HighInBC/UniverseSplitter

    Sorts the multiverse into two equal groups

    17 partsGPL-3.0

Questions

How big is the SRF Pendants PCB?

It measures 34.4 × 57 mm and has 4 copper layers, 1.6 mm thick.

What parts does the SRF Pendants use?

23 parts, built around the ATMEGA328P-AU, XCL210C331GR-G and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SRF Pendants KiCad files?

From the modalexii/PCBs repository on GitHub, at the commit this page was made from: the board is SRF Pendants/SRF Pendants.kicad_pcb and its schematic horny_charger/horny_charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SRF Pendants design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).