2 layers48.2 × 49.3 mm
Nixie pipe
tuna-f1sh/nixiepipe-hardware
Hardware design files and firmware for my Nixie Pipe modules
49 parts19
2 layers42 × 13 mm
UniverseSplitter
HighInBC/UniverseSplitterSorts the multiverse into two equal groups
- Size
- 42 × 13 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 32
- Pads
- 69
- Tracks, vias
- 142, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Apr 2024
- Updated
- 14 Oct 2026
Overview
UniverseSplitter is an open-source printed circuit board by HighInBC, from the HighInBC/UniverseSplitter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 42 × 13 mm with 17 parts on 32 nets, routed with 142 tracks and 13 vias.
It is built around the ATMEGA328P-AU and WS2812B. Its parts include 5 resistors, 4 diodes, 2 capacitors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdUniverseSplitter
Sorts the multiverse into two equal groups.
Fuse settings on ATMEGA328P-AU: Clock Internal 8Mhz
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 200R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Signal | TestPoint:TestPoint_Pad_2.5x2.5mm | TP3 |
| 1 | VCC | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
Similar boards
- 2 layers150 × 150 mm
BoardGame
jkordek1/Man-Don-t-Get-Angry-Board-game
"Man don't get mad" - electronic board game
218 parts5 - 2 layers74.2 × 78.1 mm
- 2 layers247.5 × 25 mm
Module pcb
akaFunk/BlinkyBar
Moduar LED light painting strip with 180 LEDs per meter
106 parts1CC-BY-4.0 - 2 layers57 × 78 mm
Cuebit
akita11/Cuebit
micro:bitからCue:bitへのコマンド（通信プロトコル:UART 9600bps N81）は以下です。以下の"NNN"は数値(10進数)で与えるコマンドパラメータです。また各コマンドは行末コード(0x0d or…
61 parts1MIT - 2 layers139.1 × 95.3 mm
LightLetter W
Dylanfg123/Light-Letters
This project is a collection of PCB Letters with WS2812B lights on them. ATMEGA328P based design.
78 parts - 2 layers43 × 43 mm
- 4 layers26.8 × 53 mm
Questions
How big is the UniverseSplitter PCB?
It measures 42 × 13 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UniverseSplitter use?
17 parts, built around the ATMEGA328P-AU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UniverseSplitter KiCad files?
From the HighInBC/UniverseSplitter repository on GitHub, at the commit this page was made from: the board is pcb/UniverseSplitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UniverseSplitter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).