2 layers80.5 × 8 mm
2 layers43 × 43 mm
Noname.kicad pcb 45 grader
Hal9k-dk/Hacker_BadgeHAL9K member PCB badge
- Size
- 43 × 43 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 106
- Pads
- 425
- Tracks, vias
- 909, 112
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2018
- Updated
- 30 Sep 2018
Overview
Noname.kicad pcb 45 grader is an open-source printed circuit board by Hal9k-dk, from the Hal9k-dk/Hacker_Badge repository on GitHub. It is a 2-layer board of 43 × 43 mm with 123 parts on 106 nets, routed with 909 tracks and 112 vias.
It is built around the ATMEGA328P-AU, ESP-12F and CH340G, with the WS2812B, S8050 and L13 among its other parts. Its parts include 40 capacitors, 28 diodes, 14 resistors, 12 connectors and 5 ICs. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)L13
-Coaxial Connectors (RF)East Electronics
README
README.mdHacker_Badge
HAL9K member PCB badge See more at http://wiki.hal9k.dk/projects/hacker_badge
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +16 |
| 25 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 10 | 10kOHM | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R9, R10, R13, R14 |
| 4 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C37, C38, C39, C40 |
| 3 | GND | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J3, J13, J14 |
| 2 | hal9k:HQR2000 | , | |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C1, C6 |
| 2 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4 |
| 2 | 330OHM | Resistors_SMD:R_0805_HandSoldering | R11, R12 |
| 2 | 47OHM | Resistors_SMD:R_0805_HandSoldering | R7, R8 |
| 2 | S8050 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 1 | hal9k:hal9k_60mm_negative_f_mask | ||
| 1 | + | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J2 |
| 1 | 12MHz | CSTCE16M0V53-R0:OSC_CSTCE16M0V53-R0 | Y1 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | Y3 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Y4 |
| 1 | 16MHz | CSTCE16M0V53-R0:OSC_CSTCE16M0V53-R0 | Y2 |
| 1 | 1N5819 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D26 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U4 |
| 1 | CH340G | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U3 |
| 1 | DTR_ATMEGA | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | DTR_ESP | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | Din | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J1 |
| 1 | Display | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J8 |
| 1 | Dout | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J4 |
| 1 | ESP-12F | ESP8266:ESP-12_SMD | U1 |
| 1 | IO_ATMEGA | Connector_PinHeader_2.00mm:PinHeader_1x20_P2.00mm_Vertical | J15 |
| 1 | IO_ESP | Connector_PinHeader_2.00mm:PinHeader_1x12_P2.00mm_Vertical | J16 |
| 1 | ISCP_ATMEGA | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J6 |
| 1 | L13 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D27 |
| 1 | MC14053BDG | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U5 |
| 1 | PMIC-LDO-XC6206P332MR-G(SOT23) | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | POWER | Button_Switch_SMD:SW_SPDT_PCM12 | S4 |
| 1 | RTS_ESP | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | RX-TX | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP9 |
| 1 | Reset Atmega | Button_Switch_SMD:SW_SPST_FSMSM | S3 |
| 1 | Reset Esp | Button_Switch_SMD:SW_SPST_FSMSM | S1 |
| 1 | SCL | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP7 |
| 1 | SDA | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP5 |
| 1 | SELECT | Button_Switch_SMD:SW_SPDT_PCM12 | S2 |
| 1 | SHITTY_ADD_ON | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | J7 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP4 |
| 1 | TX-RX | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP8 |
| 1 | USB | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D28 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J5 |
| 1 | WS2812B | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP6 |
| 1 | lipo-charger | lipo-charger:lipo-charger | M1 |
The 122 most common of 123 parts.
More from Hal9k-dk/Hacker_Badge
2- 2 layers76 × 10.5 mm
Similar boards
- 2 layers50 × 50 mm
- 2 layers289.7 × 128.4 mm
- 2 layers181.7 × 171.5 mm
- 2 layers180 × 128 mm
- 2 layers110 × 31.5 mm
- 2 layers42.8 × 40.5 mm
- 2 layers55.6 × 55.8 mm
- 2 layers28 × 48 mm
E meter hardware
www-ShapeLabs-de/sgm4_to_mqtt
ESP8266 electricity meter reading head for SGM-C4 meter with homeassistant mqtt-discovery
34 parts3MIT
Questions
How big is the Noname.kicad pcb 45 grader PCB?
It measures 43 × 43 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Noname.kicad pcb 45 grader use?
123 parts, built around the ATMEGA328P-AU, ESP-12F, CH340G and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Noname.kicad pcb 45 grader KiCad files?
From the Hal9k-dk/Hacker_Badge repository on GitHub, at the commit this page was made from: the board is hal9k-badge/noname.kicad_pcb_45_grader.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Noname.kicad pcb 45 grader design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hal9k-dk before reusing the design.