

Horny dom
- Size
- 19.3 × 60.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 31
- Pads
- 103
- Tracks, vias
- 222, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 31 Jan 2022
- Updated
- 31 Jan 2022
Overview
Horny dom is an open-source printed circuit board by modalexii, from the modalexii/PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.3 × 60.9 mm with 28 parts on 31 nets, routed with 222 tracks and 20 vias.
It is built around the ATTINY85-20SU. Its parts include 8 resistors, 5 capacitors, 5 diodes, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R_Small | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | C_Small | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C4, C5 |
| 2 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2 |
| 2 | Conn_01x03_Male | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | LED, LED |
| 2 | D_Zener_Small | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3, D4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | ASSR-1218 | Package_SO:SO-4_4.4x4.3mm_P2.54mm | U3 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | Tiny85 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | Batt |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | D_Small_ALT | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SW_Push | horny_charger:MXUTEUK_SelfLock_OnOff_Button_Switch | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400 | J1 |
More from modalexii/PCBs
7- 4 layers34.4 × 57 mm

- 4 layers34.4 × 57 mm

- 2 layers27.2 × 23.5 mm

- 2 layers97 × 49.5 mm

- 2 layers19.3 × 60.9 mm

- 2 layers26 × 26 mm

- 2 layers15.4 × 11.5 mm

Similar boards
- 2 layers65 × 56.5 mm

SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm

Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm

- 2 layers43.9 × 29 mm

C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm

- 2 layers200 × 100 mm

Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm

- 2 layers50 × 25 mm

LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the Horny dom PCB?
It measures 19.3 × 60.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Horny dom use?
28 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Horny dom KiCad files?
From the modalexii/PCBs repository on GitHub, at the commit this page was made from: the board is horny_dom/horny_dom.kicad_pcb and its schematic horny_charger/horny_charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Horny dom design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).