4 layers120 × 120 mm
4 layers50 × 50 mm
Amplifier600
MECSEM/electricalAll the electrical designs for MECSEM.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 40
- Nets
- 17
- Pads
- 124
- Tracks, vias
- 216, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 27 Apr 2026
Overview
Amplifier600 is an open-source printed circuit board by MECSEM, from the MECSEM/electrical repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 50 × 50 mm with 40 parts on 17 nets, routed with 216 tracks and 22 vias.
It is built around the STN0214 and H5VUD5U. Its parts include 10 resistors, 8 capacitors, 6 diodes, 4 ICs and 4 connectors. It belongs with the RP2350 boards of this library.
Main components
2
STN0214
SOT-223-65℃~+150℃ 1 NPN 1.2kV 1.6W 100mV 10uA 20 200mA 6V NPN SOT-223 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
H5VUD5U
SOD-523-55℃~+125℃ 0.8pF 15V 200nA 5A@8/20us 5V 75W@8/20us 9V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | H5VUD5U | PCM_JLCPCB:D_SOD-523 | D1, D2, D3, D4, D5, D6 |
| 5 | 1kΩ | PCM_JLCPCB:R_0603 | R1, R2, R3, R7, R9 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10uF | PCM_JLCPCB:C_1206 | C1, C3, C6 |
| 3 | ~ | PCM_JLCPCB:Hole_Tooling_JLCPCB | H5, H6, H7 |
| 2 | 1.6Meg | Resistor_THT:R_Axial_DIN0617_L17.0mm_D6.0mm_P25.40mm_Horizontal | R6, R10 |
| 2 | 100nF | PCM_JLCPCB:C_0402 | C4, C8 |
| 2 | STN0214 | FYDPLIB:SOT-223-3_STN0214_CLIPPED | U1, U2 |
| 1 | 10Meg | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4 |
| 1 | 10kΩ | PCM_JLCPCB:R_0402 | R8 |
| 1 | 10n | FYDPLIB:C_Disc_D18.5mm_W5.0mm_P10.00mm | C2 |
| 1 | 2.2nF | PCM_JLCPCB:C_0805 | C5 |
| 1 | 220pF | PCM_JLCPCB:C_0402 | C7 |
| 1 | 47kΩ | PCM_JLCPCB:R_0603 | R5 |
| 1 | CONTROLLER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | DAC7311xDCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U4 |
| 1 | HV POWER | FYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | OPA2376xxD | PCM_JLCPCB:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | OUTPUT | FYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J4 |
| 1 | U.FL | PCM_JLCPCB:IPEX-SMD_BWIPX-1-001E | J1 |
| 1 | ~ | PCM_JLCPCB:Part_Num_JLCPCB | PN1 |
Questions
How big is the Amplifier600 PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Amplifier600 use?
40 parts, built around the STN0214 and H5VUD5U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amplifier600 KiCad files?
From the MECSEM/electrical repository on GitHub, at the commit this page was made from: the board is HVDC/Amplifier600/Amplifier600.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amplifier600 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from MECSEM/electrical
12- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers72 × 50 mm
- 4 layers100 × 70 mm
- 4 layers95 × 74 mm
- 4 layers70 × 50 mm
- 4 layers78 × 53 mm
- 4 layers80 × 50 mm
- 4 layers100 × 65 mm
- 4 layers100 × 50 mm
- 4 layers100 × 50 mm
Similar boards
- 4 layers36 × 65 mm
Uwb beacon
dan-stefanov/locatof-hw
Open-source localization project based on UWB Time-of-Flight ranging
111 partsCERN-OHL-P-2.0 - 2 layers116 × 31 mm
- 2 layers117.3 × 109.7 mm
- 2 layers100 × 100 mm
Main supply 3
Thinkpad4by3/chibitron
Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability
189 parts6 - 4 layers24.4 × 24.4 mm
OSO SWAT C1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
40 parts2.1k - 4 layers70 × 56 mm
Pi adapter hc
hzeller/spixels
Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).
40 parts41LGPL-3.0 - 4 layers76.7 × 76.7 mm
- 4 layers30 × 30 mm
CamIO
intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board
40 parts20