2 layers100 × 90 mm
2 layers33 × 10 mm
- Size
- 33 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 36
- Pads
- 109
- Tracks, vias
- 216, 28
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
Tx06 is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 33 × 10 mm with 16 parts on 36 nets, routed with 216 tracks and 28 vias.
It is built around the ATTINY1606-MN, CH340E and TS5A23159DGSR. Its parts include 4 resistors, 3 ICs, 2 capacitors, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY1606-MN
QFN-20-EP(3x3)-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 1KB 20MHz 256Byte 8 Bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
TS5A23159DGSR
VSSOP-10-0.5mm-40℃~+85℃ 1.1Ω 1.65V~5.5V 100MHz 15ns 2 20ns 2:1 VSSOP-10-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2, R5 |
| 1 | Library:PCB.MCBEERINGI.DEV_small | ||
| 1 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4k7 | Library:pokayoke_1608 | JP1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ATtiny1606-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Conn_02x10_Counter_Clockwise | Package_DIP:DIP-20_W7.62mm_Socket | J1 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_Push | Library:alps-skrp | SW1 |
| 1 | TS5A23159DGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | mcbeeringi_icon | Library:mcbeeringi_icon_5mm |
Questions
How big is the Tx06 PCB?
It measures 33 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tx06 use?
16 parts, built around the ATTINY1606-MN, CH340E and TS5A23159DGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tx06 KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/avr/tx06/tx06.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tx06 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from McbeEringi/pcb-stuff
12- 2 layers95 × 100 mm
- 2 layers100 × 86 mm
- 2 layers100 × 100 mm
- 2 layers48 × 73 mm
- 2 layers92.5 × 98.4 mm
- 2 layers100 × 100 mm
- 2 layers100 × 99 mm
- 2 layers94 × 95.2 mm
- 2 layers44 × 44 mm
- 2 layers100 × 75 mm
- 2 layers24 × 49 mm
Similar boards
- 4 layers44.5 × 28 mm
OpenPnPVis
angusgbishop/PnPCAM
An Open Source Vision Camera designed for pick-and-place machines.
70 parts7GPL-3.0 - 2 layers10.6 × 18.5 mm
Asmartcap xMoto
xpix/XMOTO_TINYAVR
This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.
21 parts6 - 2 layers12.7 × 22.1 mm
Controller pcb
mvirkkunen/encodering
encodering (unfinished - the firmware for one has never even been run) ======================================================================
19 parts1 - 4 layers144.3 × 143.8 mm
- 4 layers155 × 103 mm
- 4 layers62.9 × 88.6 mm
Bit block
Citrullin/Sovereign_Bunny_Stack
From web 3 unicorn fantasy to federated web 2.5 reality.
169 parts4 - 2 layers70 × 140 mm
FreeBot main v1.1b
KULeuven-CapBot/ICRA2025_BatteryFreeRobot
CapBot's hardware is designed using KiCad, the design files are provided under HardwareDesign.
194 parts3 - 2 layers66 × 119.3 mm
HW Radar
DennisRathgeb/doppler-radar-detector
24 GHz CW Doppler + FMCW radar detector: STM32F429 + ESP32 + TouchGFX live UI, CMSIS-DSP FFT, FastAPI backend, YOLOv8 angle-of-arrival sensor fusion desktop app. ZHAW PM4 team project.
117 parts1MIT