2 layers100 × 90 mm
2 layers24 × 49 mm
- Size
- 24 × 49 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 62
- Nets
- 61
- Pads
- 220
- Tracks, vias
- 184, 41
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
Slim is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 24 × 49 mm with 62 parts on 61 nets, routed with 184 tracks and 41 vias.
It is built around the ATTINY1604-SSF, CH340E and PAM8406DR, with the TPS613222ADBV, BQ25172DSG and TS5A23159DGSR among its other parts. Its parts include 22 resistors, 15 capacitors, 8 ICs, 4 switches and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
PAM8406DR
SOIC-16-40℃~+85℃ -70dB 0.11% 10mA 2 Single-Ended Inputs 2-Channel 2.5V~5.5V 5Wx2@2Ω 90% 90dB Automatic mute/no-noise switch、Enable/disable function、Filterless architecture、Configurable output topology Class AB、Class D SOIC-16 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
TPS613222ADBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 5V 6.5uA 900mV~5.5V Boost Boost Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BQ25172DSG
WSON-8(2x2)-40℃~+125℃ 1~6 350nA 3V~18V 800mA Charging IC Nickel-Metal Hydride Battery Support WSON-8(2x2) Battery Management ROHSTexas InstrumentsBattery Management
TS5A23159DGSR
VSSOP-10-0.5mm-40℃~+85℃ 1.1Ω 1.65V~5.5V 100MHz 15ns 2 20ns 2:1 VSSOP-10-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
CUHS20S30FS
SOD-323SOD-323 Schottky Diodes ROHSFUXINSEMISchottky Diodes
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R11, R12, R13, R14, R15, R18, R21, R22 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R7 |
| 3 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 3 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8 |
| 3 | SW | Library:alps-skr[gp] | SW1, SW2, SW3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C5, C9 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | 56k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | CUHS20S30 | Library:US2H | D2, D3 |
| 2 | NC(1k) | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1u-PAM8406 | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 1u-PWR0 | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 1u-PWR1 | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1u-VREF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 2u2 | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4u7 | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | AMP_AB | Resistor_SMD:R_0603_1608Metric | JP1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | BQ25172 | Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U5 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1 |
| 1 | NiMh*2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | OUT0+ | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | OUT0- | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | OUT1 | Connector_JST:JST_ZH_B2B-ZR_1x02_P1.50mm_Vertical | J3 |
| 1 | PAM8406D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | POW | Library:IS-1245T-G | SW4 |
| 1 | TPS56124x | Package_TO_SOT_SMD:SOT-563 | U3 |
| 1 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TS5A23159DGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | USB | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
| 1 | alps-rk10j12e | Library:alps-rk10j12e | U6 |
Questions
How big is the Slim PCB?
It measures 24 × 49 mm and has 2 copper layers, 1 mm thick.
What parts does the Slim use?
62 parts, built around the ATTINY1604-SSF, CH340E, PAM8406DR and TPS613222ADBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slim KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is proj/musicbox/slim/slim.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slim design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from McbeEringi/pcb-stuff
12- 2 layers95 × 100 mm
- 2 layers100 × 86 mm
- 2 layers100 × 100 mm
- 2 layers48 × 73 mm
- 2 layers92.5 × 98.4 mm
- 2 layers100 × 100 mm
- 2 layers100 × 99 mm
- 2 layers94 × 95.2 mm
- 2 layers44 × 44 mm
- 2 layers100 × 75 mm
- 2 layers100 × 75 mm
Similar boards
- 2 layers76.2 × 50.8 mm
- 2 layers20 × 8.5 mm
- 2 layers99 × 98.4 mm
- 2 layers50 × 50 mm
- 2 layers127.3 × 82.2 mm
Little red rover
little-red-rover/lrr-hardware
Hardware design files for Little Red Rover.
65 parts1CERN-OHL-W-2.0 - 2 layers79.5 × 66 mm
- 2 layers19 × 18 mm
Unni smartification c6-10.99-constraints
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices
77 parts2GPL-3.0 - 2 layers133.9 × 19.4 mm
Guilty pad gay
askiiart/guilty-pad-gay
a macropad thingy that can magnetically attach to a keyboard and interface with it over serial
40 parts1