

Kb-2amp tx02
- Size
- 100 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 69
- Pads
- 383
- Tracks, vias
- 537, 132
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
Kb-2amp tx02 is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 99 mm with 102 parts on 69 nets, routed with 537 tracks and 132 vias.
It is built around the ATTINY202-SSN, ATTINY404-SSN and CH340E, with the PAM8406DR, PAM8408DR and TS5A23159DGSR among its other parts. Its parts include 21 switches, 17 capacitors, 17 diodes, 15 connectors and 11 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATTINY202-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 2KB 6 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATTINY404-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 128Byte 20MHz 256Byte 4KB 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersPAM8406DR
SOIC-16-40℃~+85℃ -70dB 0.11% 10mA 2 Single-Ended Inputs 2-Channel 2.5V~5.5V 5Wx2@2Ω 90% 90dB Automatic mute/no-noise switch、Enable/disable function、Filterless architecture、Configurable output topology Class AB、Class D SOIC-16 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersPAM8408DR
SO-16-40℃~+85℃ 0.08% 2 Pairs Differential Inputs 2-Channel 2.4Wx2@4Ω 2.5V~6V 70dB 83%、87% 8mA 95dB Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture、Digitally programmable gain Class D SO-16 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersTS5A23159DGSR
VSSOP-10-0.5mm-40℃~+85℃ 1.1Ω 1.65V~5.5V 100MHz 15ns 2 20ns 2:1 VSSOP-10-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersCR2032
-- Unclassified goods ROHSMaxellUncategorised
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 15 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 9 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C1, C1, C2, C2, C2, C2, C3, C3, C4 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C5, C6, C6 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric | R3, R3, R4, R4 |
| 4 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C2 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | AudioJack3 | Library:MJ-8435 | J1, J3, J3 |
| 2 | Library:PCB.MCBEERINGI.DEV_small | , | |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R2 |
| 2 | ATtiny202-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U1 |
| 2 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U2, U2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D1 |
| 2 | LOUT | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2, J2 |
| 2 | OUT | Package_DIP:DIP-8_W7.62mm_Socket | J2, J2 |
| 2 | PWR | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J4, J4 |
| 2 | ROUT | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1, J1 |
| 2 | SW_Push | Library:alps-skrp | SW1, SW1 |
| 2 | TS5A23159DGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3, U3 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3, J3 |
| 2 | mcbeeringi_icon | Library:mcbeeringi_icon_5mm | , |
| 1 | Library:PCB.MCBEERINGI.DEV | ||
| 1 | AB | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | ATtiny404-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | CR2032 | Battery:BatteryHolder_Multicomp_BC-2001_1x2032 | BT1 |
| 1 | LOGO | Library:mcbeeringi_icon_20mm | |
| 1 | PAM8406D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | PAM8408D | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | POW | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | PTF | Resistor_SMD:R_1020_2550Metric | R2 |
| 1 | SW_Push | Library:alps-skrg | SW16 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW17 |
| 1 | UPDI | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | VOL_DOWN | Library:alps-skrg | SW2 |
| 1 | VOL_UP | Library:alps-skrg | SW1 |
More from McbeEringi/pcb-stuff
12- 2 layers100 × 90 mm

- 2 layers95 × 100 mm

- 2 layers100 × 86 mm

- 2 layers100 × 100 mm

- 2 layers48 × 73 mm

- 2 layers92.5 × 98.4 mm

- 2 layers100 × 100 mm

- 2 layers94 × 95.2 mm

- 2 layers44 × 44 mm

- 2 layers100 × 75 mm

- 2 layers24 × 49 mm

- 2 layers100 × 75 mm

Similar boards
- 2 layers56.1 × 89.5 mm

Christmas tree pcb
IamPhytan/christmas-tree-pcb
Christmas Tree PCB, made with FOSS
17 parts4CERN-OHL-P-2.0 - 2 layers209.2 × 82 mm

- 4 layers95.2 × 112.5 mm

- 2 layers99.8 × 90.3 mm

- 2 layers76.2 × 50.8 mm

- 4 layers88 × 60 mm

- 4 layers65 × 30.9 mm

Elec RPI Robot HAT
armature-ai-labs/indieduck
Open robot prototype: editable FreeCAD CAD, printable parts and fit-test documentation. Adapted from Open Duck Mini.
132 partsApache-2.0 - 4 layers65 × 30.9 mm

Elec RPI Robot HAT
modewang/elec_RPI_Robot_HAT
The RPIRobotHAT can be power from 5 to 28V. It is designed to use of the motor connector as an power input.
127 partsApache-2.0
Questions
How big is the Kb-2amp tx02 PCB?
It measures 100 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kb-2amp tx02 use?
102 parts, built around the ATTINY202-SSN, ATTINY404-SSN, CH340E and PAM8406DR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kb-2amp tx02 KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is paneled/251104/kb-2amp-tx02/kb-2amp-tx02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kb-2amp tx02 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).