

Mb n boost
- Size
- 100 × 86 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 218
- Nets
- 100
- Pads
- 772
- Tracks, vias
- 942, 502
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2023
- Updated
- 27 Oct 2026
Overview
Mb n boost is an open-source printed circuit board by McbeEringi, from the McbeEringi/pcb-stuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 86 mm with 218 parts on 100 nets, routed with 942 tracks and 502 vias.
It is built around the ATTINY1604-SSF, ATTINY402-SSN and AM2837, with the CH340E, TPS613222ADBV and PAM8406DR among its other parts. Its parts include 56 resistors, 38 capacitors, 30 ICs, 22 diodes and 18 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATTINY402-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AM2837
SOP-8SOP-8 Motor Driver Boards, Modules ROHSAMtekMotor Driver Boards, ModulesCH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTPS613222ADBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 5V 6.5uA 900mV~5.5V Boost Boost Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPAM8406DR
SOIC-16-40℃~+85℃ -70dB 0.11% 10mA 2 Single-Ended Inputs 2-Channel 2.5V~5.5V 5Wx2@2Ω 90% 90dB Automatic mute/no-noise switch、Enable/disable function、Filterless architecture、Configurable output topology Class AB、Class D SOIC-16 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersCH213K
SOT-23-32.2V~5.5V 240mV 240mΩ 3.6uA Integrated FET SOT-23-3 ORing Controllers ROHSWCH (Nanjing Qinheng Microelectronics)Power Distribution SwitchesAP7375-50Y
SOT-89-40℃~+125℃@(Tj) 1 2.1uA 300mA 350mV@(100mA) 45V 5V 85dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedUncategorisedBQ25172DSG
WSON-8(2x2)-40℃~+125℃ 1~6 350nA 3V~18V 800mA Charging IC Nickel-Metal Hydride Battery Support WSON-8(2x2) Battery Management ROHSTexas InstrumentsBattery ManagementCH221K
SOT-23-6-40℃~+105℃ 100W 5V、9V、12V、15V、20V PD 3.0 Power Receiver Controller SOT-23-6 USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
218| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R4, R6, R6, R8, R8, R10, R10, R15, R15, R16, R16, R17, R17, R18, R18 +6 |
| 16 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D1, D2, D2, D3, D3, D4, D4, D5, D5, D6, D6, D7, D7, D8, D8 |
| 12 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C2, C3, C3, C5, C5, C6, C6, C7, C7, C8, C8 |
| 10 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R1, R2, R2, R3, R3, R5, R5, R7, R7 |
| 8 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C3, C3, C4, C4, C4, C4, C5, C5 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H1, H2, H2, H3, H3, H4, H4 |
| 8 | SW_Push | Library:alps-skr[gp] | SW1, SW1, SW2, SW2, SW3, SW3, SW4, SW4 |
| 6 | Library:PCB.MCBEERINGI.DEV_small | , , , , , | |
| 6 | 47k | Resistor_SMD:R_0603_1608Metric | R4, R4, R11, R11, R12, R12 |
| 6 | 56k | Resistor_SMD:R_0603_1608Metric | R1, R1, R6, R6, R7, R7 |
| 6 | LOGO | Library:mcbeeringi_icon_10mm | , , , , , |
| 4 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C1, C1, C2, C2 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R3, R5, R5 |
| 4 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C1, C6, C6 |
| 4 | 4u7 | Inductor_SMD:L_1008_2520Metric | L1, L1, L1, L1 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R1, R2, R2 |
| 4 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3, U3, U4, U4 |
| 4 | CH213K | Package_TO_SOT_SMD:SOT-23 | U7, U7, U8, U8 |
| 4 | NC(1k) | Resistor_SMD:R_0603_1608Metric | R13, R13, R14, R14 |
| 4 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U1, U1, U5, U5 |
| 2 | 1u-PAM8406 | Capacitor_SMD:C_0603_1608Metric | C10, C10 |
| 2 | 1u-PWR0 | Capacitor_SMD:C_0603_1608Metric | C9, C9 |
| 2 | 1u-PWR1 | Capacitor_SMD:C_0603_1608Metric | C11, C11 |
| 2 | 1u-VREF | Capacitor_SMD:C_0603_1608Metric | C12, C12 |
| 2 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C1 |
| 2 | AM2837 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U5, U5 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q1 |
| 2 | AP7375 | Package_TO_SOT_SMD:SOT-23-3 | U2, U2 |
| 2 | AQM0802A-RN-GBW | Library:AQM0802A-RN-GBW | U4, U4 |
| 2 | ATtiny402-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U3 |
| 2 | BATT | Resistor_SMD:R_0603_1608Metric | JP1, JP1 |
| 2 | BC | Resistor_SMD:R_0603_1608Metric | JP1, JP1 |
| 2 | BQ25172 | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U2, U2 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_2466_1xAAA | BT1, BT1 |
| 2 | Buzzer | Library:PKLCS1212E4001-R1 | BZ1, BZ1 |
| 2 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U1, U1 |
| 2 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U1, U1 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J2 |
| 2 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J1, J1 |
| 2 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP1 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D3 |
| 2 | NiMh*2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J2 |
| 2 | OUT1 | Connector_JST:JST_ZH_S2B-ZR-SM4A-TF_1x02-1MP_P1.50mm_Horizontal | J3, J3 |
| 2 | PAM8406D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U9, U9 |
| 2 | POW | Library:IS-1245T-G | SW2, SW2 |
| 2 | STAT | LED_SMD:LED_0603_1608Metric | D2, D2 |
| 2 | SW | Library:alps-skr[gp] | SW1, SW1 |
| 2 | TNOW | LED_SMD:LED_0603_1608Metric | D1, D1 |
| 2 | UPDI | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP2 |
| 2 | UPDI | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2, J2 |
| 2 | USB | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J1 |
| 2 | USB_C_Plug | Library:USB_C_PLUG_00402-UCAM001-X | P1, P1 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J1 |
| 2 | WO0+ | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP4 |
| 2 | WO0- | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3, TP3 |
| 2 | alps-rk10j12e | Library:alps-rk10j12e | U6, U6 |
| 2 | feeder | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J3 |
More from McbeEringi/pcb-stuff
12- 2 layers100 × 90 mm

- 2 layers95 × 100 mm

- 2 layers100 × 100 mm

- 2 layers48 × 73 mm

- 2 layers92.5 × 98.4 mm

- 2 layers100 × 100 mm

- 2 layers100 × 99 mm

- 2 layers94 × 95.2 mm

- 2 layers44 × 44 mm

- 2 layers100 × 75 mm

- 2 layers24 × 49 mm

- 2 layers100 × 75 mm

Similar boards
- 2 layers84 × 69 mm

Pippitank engine
garypippi/pippitank
R1 = 67kΩ (47kΩ + 20kΩ) R2 = 10kΩ (8.4V時 1.091V、6.0V時 0.779V)
82 partsMIT - 4 layers90 × 50 mm

- 2 layers76.2 × 50.8 mm

- 4 layers100 × 65 mm

BridgeWriter v1
tmcit-ararobo-2026a/bridge-writer
| Supports Ethernet / Wi‑Fi6 / USB / CAN. | - | Ethernet / Wi‑Fi6 / USB / CAN 対応。|
229 partsMIT - 2 layers95 × 95 mm

- 2 layers218 × 98.8 mm

- 2 layers97 × 72 mm

ESP32C3-miniMAS
syamei0/Y.maku
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
70 parts - 4 layers25 × 14.5 mm

Questions
How big is the Mb n boost PCB?
It measures 100 × 86 mm and has 2 copper layers, 1 mm thick.
What parts does the Mb n boost use?
218 parts, built around the ATTINY1604-SSF, ATTINY402-SSN, AM2837 and CH340E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mb n boost KiCad files?
From the McbeEringi/pcb-stuff repository on GitHub, at the commit this page was made from: the board is paneled/260212/mb-n-boost/mb-n-boost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mb n boost design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).