Skip to the content
21

ATTINY1606-MN

Microchip TechnologyExtended

-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 1KB 20MHz 256Byte 8 Bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHS

DatasheetJLCPCBLCSC
Part id
microchip/ATTINY1606-MN
Category
Microcontrollers (MCU, MPU, SOC)
Package
QFN-20-EP(3x3)
Pins
21
In stock
103 at JLCPCB (C1852740)
Used on
6 open-source boards

Overview

The ATTINY1606-MN is a microcontroller made by Microchip Technology in a QFN-20-EP(3x3) package with 21 pins. -40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 1KB 20MHz 256Byte 8 Bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny1606-M, from KiCad's library) and its footprint (Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm, from KiCad's library), ready for a KiCad board. 103 are in stock at JLCPCB (part C1852740). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

PA21PA32GND3VCC4PA45PA56PA67PA78PB59PB410PB311PB212PB113PB014PC015PC116PC217PC318RESET/PA019PA120
MCU_Microchip_ATtiny:ATtiny1606-MFrom KiCad's library

Footprint

21
Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mmFrom KiCad's library

Pinout

21
The pins of the ATTINY1606-MN
PinNameType
1PA2Input/output
2PA3Input/output
3GNDPower in
4VCCPower in
5PA4Input/output
6PA5Input/output
7PA6Input/output
8PA7Input/output
9PB5Input/output
10PB4Input/output
11PB3Input/output
12PB2Input/output
13PB1Input/output
14PB0Input/output
15PC0Input/output
16PC1Input/output
17PC2Input/output
18PC3Input/output
19RESET/PA0Input/output
20PA1Input/output
21GNDPassive

Open-source boards using it

6
  • 4 layers44.5 × 28 mmOpenPnPVis, the printed circuit board in 3D

    OpenPnPVis

    angusgbishop/PnPCAM

    An Open Source Vision Camera designed for pick-and-place machines.

    70 parts7GPL-3.0
  • 2 layers10.6 × 18.5 mmAsmartcap xMoto, the printed circuit board in 3D

    Asmartcap xMoto

    xpix/XMOTO_TINYAVR

    This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.

    21 parts6
  • 2 layers12.7 × 22.1 mmController pcb, the printed circuit board in 3D

    Controller pcb

    mvirkkunen/encodering

    encodering (unfinished - the firmware for one has never even been run) ======================================================================

    19 parts1
  • 2 layers33 × 10 mmTx06, the printed circuit board in 3D

    Tx06

    McbeEringi/pcb-stuff

    16 parts2MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY1606-MN?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny1606-M and the footprint Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY1606-MN?

QFN-20-EP(3x3), with 21 pins. Its footprint is drawn on this page.

Where is the ATTINY1606-MN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY1606-MN?

JLCPCB lists it as part C1852740, with 103 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY1606-MN?

Parts like it in the library: the ATTINY816-MN by Microchip Technology, the ATTINY416-MN by Microchip Technology, the ATTINY1616-MF by Microchip Technology and the ATTINY826-MU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY1606-MN?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.