
OpenPnPVis
angusgbishop/PnPCAM
An Open Source Vision Camera designed for pick-and-place machines.

encodering (unfinished - the firmware for one has never even been run) ======================================================================
Controller pcb is an open-source printed circuit board by mvirkkunen, from the mvirkkunen/encodering repository on GitHub. It is a 2-layer board of 12.7 × 22.1 mm with 19 parts on 28 nets, routed with 107 tracks and 6 vias.
It is built around the ATTINY1606-MN and PEC11L-4220F-S0015. Its parts include 11 resistors, 3 capacitors, 2 connectors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Yet another LED ring for encoders.
Features (once finished):
Write access:
Read access:
Register pointer is auto-incremented.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 20ohm | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R10, R11 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ATtiny1606-M | Project:Project_ATTINY1616_VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | IO connector | Project:Project_PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED_Pins | Project:Mounting_Hole_Pattern | J2 |
| 1 | PEC11L-4220F-S0015 | Project:Project_RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW1 |
| 1 | UPDI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |

angusgbishop/PnPCAM
An Open Source Vision Camera designed for pick-and-place machines.

xpix/XMOTO_TINYAVR
This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.


perc-sw/analog_shield
CAD files for the student workshop Analog Shield board.




hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 12.7 × 22.1 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ATTINY1606-MN and PEC11L-4220F-S0015. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mvirkkunen/encodering repository on GitHub, at the commit this page was made from: the board is controller_pcb/controller_pcb.kicad_pcb and its schematic controller_pcb/controller_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mvirkkunen before reusing the design.