MusicallyEmbodiedML/MEMLNaut6MEMLNaut 0 3 is an open-source printed circuit board by MusicallyEmbodiedML, from the MusicallyEmbodiedML/MEMLNaut repository on GitHub. It is a 4-layer board of 155 × 103 mm with 138 parts on 157 nets, routed with 2,031 tracks and 329 vias.
It is built around the SGTL5000XNLA3, W25Q128JVPIQ and TLV76733DRVR, with the TS5A23159DGSR, LP5907MFX-1.8 and 1N4148WS among its other parts. Its parts include 41 capacitors, 34 resistors, 24 connectors, 11 ICs and 7 switches.
Hardware for the MEMLNaut instrument
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11, C12, C13, C15, C18, C19, C20, C35, C36, C37 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C23, C24, C29, C30, C31, C34, C40, C41 |
| 6 | 0R0 | Resistor_SMD:R_0603_1608Metric | R20, R22, R23, R24, R25, R26 |
| 5 | 220 | Resistor_SMD:R_0603_1608Metric | R10, R27, R28, R29, R30 |
| 4 | 100k | Eurocad:Alpha9mmPot | RV_Gain1, RV_X1, RV_Y1, RV_Z1 |
| 4 | 1u Film | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C27, C28, C32, C33 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R4, R18, R19 |
| 4 | 50 | Resistor_SMD:R_0603_1608Metric | R31, R32, R33, R34 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R2, R3, R8 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C21 |
| 3 | 2.2k | Resistor_SMD:R_0603_1608Metric | R14, R16, R17 |
| 3 | 27R | Resistor_SMD:R_0603_1608Metric | R5, R6, R7 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 1N5817 | Diode_SMD:D_SOD-323 | D3, D4 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C38, C39 |
| 2 | 22u 0805 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C22 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C14, C16 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | SW Momentary (on)-off-(on) 1MS4T1B1M1QES | emutelab:Thonk DWB2 | SW3, SW4 |
| 2 | SW on-on toggle | emutelab:Thonk DWB2 | SW1, SW2 |
| 2 | TLV76733DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U4, U6 |
| 2 | TS5A23159DGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3, U11 |
| 2 | ~ | emutelab:SW-TH_K2-1102AQ-C4CW-01 | SW5, SW6 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 100n COG | Capacitor_THT:C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C26 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 3.3uH | emutelab:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U7 |
| 1 | ADC Cx | emutelab:HDR-SMD_16P-P2.54-V-M-R2-C8-S7.4 | J3 |
| 1 | CM4012M00012001 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | Conn_I2C | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J14 |
| 1 | Conn_Pi_SWD | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J8 |
| 1 | Conn_Power | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J7 |
| 1 | Conn_Power_Ext | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J21 |
| 1 | Custom Cx | emutelab:HDR-SMD_16P-P2.54-V-M-R2-C8-S7.4 | J2 |
| 1 | FLASH or PSRAM | Package_SO:SSOP-8_5.25x5.24mm_P1.27mm | U2 |
| 1 | G*** | kibuzzard-6695C28C | kibuzzard-6695C28C |
| 1 | GPIO A Cx | emutelab:HDR-SMD_16P-P2.54-V-M-R2-C8-S7.4 | J5 |
| 1 | GPIO B Cx | emutelab:HDR-SMD_16P-P2.54-V-M-R2-C8-S7.4 | J4 |
| 1 | Hanbo_USB_C_Receptacle_USB2.0_MC-110LD-L137 | emutelab:USB-C-TH_MC-110LD-L137-A | J1 |
| 1 | Headphone_Cx | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J17 |
| 1 | I2S Cx | emutelab:HDR-SMD_6P-P2.54-V-M-S4.8 | J22 |
| 1 | Joystick Cx | emutelab:HDR-SMD_6P-P2.54-V-M-S4.8 | J6 |
| 1 | LED Test | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | Line In Cx | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J15 |
| 1 | Line In L | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J11 |
| 1 | Line In R | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J10 |
| 1 | Line Out Cx | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J20 |
| 1 | Line Out L | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J19 |
| 1 | Line Out R | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J18 |
| 1 | MIDI In | emutelab:CONN-TH_DIN-504B-M10 | CN1 |
| 1 | MIDI Out | emutelab:CONN-TH_DIN-504B-M10 | CN2 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J13 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PEC11R-4215F-S0024 | digikey-footprints:Rotary_Encoder_Switched_PEC11R | S1 |
| 1 | RP235x-B | emutelab:QFN-80_EP_10x10_Pitch0.4mm | U5 |
| 1 | SGTL5000XNLA3 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U8 |
| 1 | SPI1 header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | TFT_320x240 | tft touch ili9341:TFT-320x240 | U9 |
| 1 | TYPE-C_16PIN_2MD(073) | emutelab:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | W25Q128JVPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U1 |
| 1 | mic | emutelab:HDR-TH_3P-P2.54_DZ254S-11-03-48 | J9 |
| 1 | ~ | emutelab:AUDIO-TH_PJ-325C | J16 |
The 134 most common of 138 parts.
It measures 155 × 103 mm and has 4 copper layers, 1 mm thick.
138 parts, built around the SGTL5000XNLA3, W25Q128JVPIQ, TLV76733DRVR and TS5A23159DGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MusicallyEmbodiedML/MEMLNaut repository on GitHub, at the commit this page was made from: the board is MEMLNaut_0_3/MEMLNaut_0_3.kicad_pcb and its schematic MEMLNautBalancedIO/MEMLNautBalancedIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MusicallyEmbodiedML before reusing the design.
RodrigoCAndrade/LIONv3-R
The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
RodrigoCAndrade/LIONv3-Mini
The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
RobustRobby/RPR-TNC
The SGTL5000 sound chip finds its place beneath the Teensy. It is the 20 (21) pin version, as opposed to the 32 pin version used on the audio shield.
aaronraj11/MES4-MCU
A small STM32G0B1 microcontroller module with CAN, built as an M.2 2242 (B-key) card.
theohg/PD240W
PD240W is a complete hardware and firmware project converting USB-C Power Delivery into a programmable 240W (48V 5A) bench power supply, featuring C++ code for Raspberry Pi Pico, custom PCB Gerbers, and a 3D-printable…