
IOT
aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics

ESP32-C3 IoT sensor node with USB-C power path management — KiCad PCB design project
Esp32-sensor board is an open-source printed circuit board by marwantm, from the marwantm/esp32-sensor-board repository on GitHub. It is a 4-layer board of 99.6 × 55.8 mm with 86 parts on 76 nets, routed with 785 tracks and 149 vias.
It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 and RISC-V boards of this library.
A 4-layer ESP32-C3 IoT sensor board with onboard LiPo charging, SD storage, and a multi-sensor front end, designed in KiCad by following Tech Explorations' full board-development pipeline tutorial — my most advanced build yet, covering the complete flow from schematic to manufacturing and assembly.

This board is built around the ESP32-C3-WROOM-02, a RISC-V Wi-Fi/BLE module, paired with a small sensor suite (environmental, audio, and light), onboard SPI flash, microSD storage, and a full LiPo battery charging path — a compact, self-contained IoT sensor node platform.
| MCU | ESP32-C3-WROOM-02 (RISC-V, Wi-Fi + BLE) |
| Sensors | BME280 (temperature/humidity/pressure), electret mic + MAX4466 amplifier, TEMT6000 ambient light sensor |
| Storage | W25Q32JVSSIQ SPI flash (32 Mbit) + microSD card slot |
| Connectivity | USB-C (via CP2102N USB-UART bridge), I2C header for OLED display, GPIO breakout |
| Power | USB-C (5V) or LiPo battery (JST connector), MCP73871 Li-ion/LiPo charge management, LM1117MPX-3.3 LDO |
| Programming | Auto-program circuit (DTR/RTS → EN/IO0 via BC817 transistors) — no manual boot/reset sequence needed |
| PCB | 4-layer |
| Design Tool | KiCad 9 |
This project pushed further than my previous boards, moving from single-sheet schematics and simple 2-layer boards into a full multilayer design with manufacturing and assembly considerations built in from the start:
Schematic Design
PCB Layout
Manufacturing & Assembly
| Schematic (Power & USB) | Schematic (ESP32, USB, Flash) |
|---|---|
![]() | ![]() |
| Schematic (Sensors) | Schematic (User Interface) |
|---|---|
![]() | ![]() |
| PCB Top | PCB Bottom |
|---|---|
![]() | ![]() |
| 3D Front | 3D Back |
|---|---|
![]() | ![]() |
ESP32-Sensor-Board/
├── README.md
├── Hardware/ # Manufacturing-ready outputs
│ ├── ESP32 Sensor Board_Schematic.pdf
│ ├── ESP32 Sensor Board_PCB.pdf
│ ├── BOM.csv
│ └── Gerbers.zip
├── Images/ # Renders and layer screenshots
│ ├── 3D_Back.png
│ ├── 3D_Front.png
│ ├── PCB_Bottom.png
│ ├── PCB_Top.png
│ ├── Schematic_Page_1.png
│ ├── Schematic_Page_2.png
│ ├── Schematic_Page_3.png
│ └── Schematic_Page_4.png
└── Source Files/ # Full KiCad project (editable source)
├── Additional Components/ # Custom library (parts, footprints)
├── Esp32 Sensor Board.kicad_pcb
├── Esp32 Sensor Board.kicad_prl
├── Esp32 Sensor Board.kicad_pro
├── Esp32 Sensor Board.kicad_sch
├── esp32-c3-02.kicad_sch
├── sensors.kicad_sch
├── user_interface.kicad_sch
└── fp-lib-tableBuilt by following Tech Explorations's ESP32 sensor board tutorial, which covers the complete pipeline from board specification through ordering and assembly. This project is a learning exercise, not an original design — full credit for the schematic architecture and design decisions goes to Tech Explorations' tutorial series.
Marwan Tamer Electrical Power Engineering student, building toward Embedded Systems Engineering LinkedIn
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21 |
| 9 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R19, R21, R26, R28, R30, R33, R34 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R14, R18 |
| 4 | 10u | My_Library:T491A | C3, C4, C7, C12 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C11, C19, C22 |
| 4 | 50 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R20 |
| 3 | LTST-C170KRKT | My_Library:LEDC2012X120N | LED1, LED4, LED6 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R27, R29 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170GKT | My_Library:LEDC2012X120N | LED3, LED5 |
| 1 | 0ZCH0110AF2E | My_Library:FUSC3226X100N | F1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 22k1 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 47k5 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 4u7 | My_Library:T491A | C9 |
| 1 | B2B-PH-SM4-TB | My_Library:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | My_Library:PSON65P250X250X100-8N | U2 |
| 1 | BOOT | My_Library:SW_USLPT2819DT2TR | S1 |
| 1 | CMC-5042PF-AC | My_Library:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02-H4 | My_Library:MODULE_ESP32-C3-WROOM-02-H4 | U3 |
| 1 | GSD090012SEU | My_Library:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MPX-3.3 | My_Library:VREG_LM1117MPX-3.3 | VR1 |
| 1 | LTST-C170TBKT | My_Library:LEDC2012X120N | LED2 |
| 1 | MAX4466EXK | My_Library:SOT65P210X110-5N | U7 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | RESET | My_Library:SW_USLPT2819DT2TR | S2 |
| 1 | SS-52400-003 | My_Library:BELFUSE_SS-52400-003 | J1 |
| 1 | TEMT6000X01 | My_Library:TRANS_TEMT6000X01 | Q1 |
| 1 | Test CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Test CS_SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Test MISO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | Test MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Test SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | W25Q32JVSSIQ | My_Library:SOIC127P790X216-8N | U6 |
The 85 most common of 86 parts.

aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics

EngMeesh/ESP32_IoT_Dev_Board
A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB
4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.

JoseSanchez122/ESP32_custom_board
Custom ESP32-WROOM-32 PCB with DHT22 (temperature/humidity), BH1750 (light), and MPU-6050 (motion) sensors, 3.3V regulator, USB-C/battery input, Wi-Fi/Bluetooth, GPIO/I2C pins, LED, and reset button, for compact IoT…

vinod-gunda/4_layer_IOT_Development_Board
4-layer ESP32-C3 development board designed using KiCad

Raghav9git/ESP-32-IoT-PCB-Board-
A compact 4-layer IoT development board built around the ESP32-C3, integrating environmental sensing, local storage, USB-C power with LiPo battery management, and a programming/debug interface on a single board.

pravinsharma15k-ops/ESP32-C3-Sensor-Board
Battery-powered ESP32-C3 sensor board with USB-C charging, KiCad 10 design files

ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB
ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial
It measures 99.6 × 55.8 mm and has 4 copper layers, 1.6 mm thick.
86 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the marwantm/esp32-sensor-board repository on GitHub, at the commit this page was made from: the board is Source Files/Esp32 Sensor Board.kicad_pcb and its schematic Source Files/Esp32 Sensor Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask marwantm before reusing the design.