Skip to the content
4 layers81.4 × 53.2 mmIOT development board, the printed circuit board in 3D

4-layer ESP32-C3 development board designed using KiCad

Size
81.4 × 53.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
89
Nets
75
Pads
326
Tracks, vias
636, 133
Pours
12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Aug 2026
Updated
16 Aug 2026

Overview

IOT development board is an open-source printed circuit board by vinod-gunda, from the vinod-gunda/4_layer_IOT_Development_Board repository on GitHub. It is a 4-layer board of 81.4 × 53.2 mm with 89 parts on 75 nets, routed with 636 tracks and 133 vias.

It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the CP2102N-A02-GQFN20R, MAX4466EXK+T and W25Q32JVSSIQ among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the microcontroller boards and home automation and IoT boards and the ESP32 and RISC-V boards of this library.

Main components

12

README

Readme.md

4-Layer ESP32-C3 Development Board

A custom 4-layer ESP32-C3 development board designed from scratch using KiCad 10 as part of my embedded systems and PCB design learning.

Key Features

  • ESP32-C3 based controller
  • USB-C, USB-UART, Li-Po charging and power management
  • SD Card, Flash Memory and sensor interfaces
  • 4-layer PCB with power and GND distribution

PCB Design Skills

  • Custom schematic symbol design
  • Custom footprint design
  • Custom logo-to-footprint conversion
  • Hierarchical schematic design
  • PCB layout, routing and DRC verification

Tools & Technology

  • KiCad 10
  • ESP32-C3
  • 4-Layer PCB

Repository Contents

  • KiCad schematic files
  • PCB layout files
  • Custom symbols and footprints
  • Project images

Purpose

This project was developed for learning, prototyping, and improving practical PCB design skills.

Parts

89
QtyValueFootprintReferences
110.1uFCapacitor_SMD:C_0805_2012MetricC2, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21
810KResistor_SMD:R_0805_2012MetricR1, R2, R19, R23, R30, R32, R33, R34
6470Resistor_SMD:R_0805_2012MetricR7, R8, R9, R10, R14, R15
450Resistor_SMD:R_0805_2012MetricR16, R20, R21, R22
31uFCapacitor_SMD:C_0805_2012MetricC11, C19, C22
32KResistor_SMD:R_0805_2012MetricR5, R26, R28
3LTST-C170KRKTLTST-C170KRKT:DIOC200X125X110D2, D4, D6
210uFTANTALUM-SMD-10UF-20V-20__1206:CT1206C3, C4
210ufTANTALUM-SMD-10UF-20V-20__1206:CT1206C7, C12
21MResistor_SMD:R_0805_2012MetricR27, R29
24.7KResistor_SMD:R_0805_2012MetricR24, R25
25.1KResistor_SMD:R_0805_2012MetricR3, R4
2BC817Package_TO_SOT_SMD:SOT-23Q2, Q3
2LTST-C170GKTLTST-C170GKT:LED_LTST-C170GKTD1, D5
2MountingHole_2.1mmMountingHole:MountingHole_2.1mmMH1, MH2
10.1uCapacitor_SMD:C_0805_2012MetricC1
10ZCH0110AF2E0ZCH0110AF2E:FUSC3225X100NF1
1100KResistor_SMD:R_0805_2012MetricR31
110nFCapacitor_SMD:C_0805_2012MetricC17
11KResistor_SMD:R_0805_2012MetricR11
11uCapacitor_SMD:C_0805_2012MetricC6
120KResistor_SMD:R_0805_2012MetricR6
122.1KResistor_SMD:R_0805_2012MetricR12
14.7uFTANTALUM-SMD-10UF-20V-20__1206:CT1206C9
147.5KResistor_SMD:R_0805_2012MetricR13
1B2B-PH-SM4-TBB2B-PH-SM4-TB:JST_B2B-PH-SM4-TBJ2
1BME280BME280:PSON65P250X250X100-8NU2
1BOOTUSLPT2819DT2TR:SW_USLPT2819DT2TRS1
1CMC-5042PF-ACCMC-5042PF-AC:CUI_CMC-5042PF-ACMK1
1CP2102N-A02-GQFN20RCP2102N-A02-GQFN20R:SILABS_CP2102N-A02-GQFN20RU4
1CSTestPoint:TestPoint_Pad_D1.0mmTP5
1CS_SDTestPoint:TestPoint_Pad_D1.0mmTP4
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1ESP32-C3-WROOM-02-H4ESP32-C3-WROOM-02-H4:MODULE_ESP32-C3-WROOM-02-H4U3
1GSD090012SEUGSD090012SEU:AMPHENOL_GSD090012SEUJ3
1KiCad-Logo2_12mm_SilkScreenSymbol:KiCad-Logo2_12mm_SilkScreen
1LM1117MPX-3.3LM1117MPX-3.3:VREG_LM1117MPX-3.3VR1
1LOGOLogos:vinod_logo_38_16_p
1LTST-C170TBKTLTST-C170TBKT:DIOC200X125X110D3
1MAX4466EXKMAX4466EXK:SOT65P210X110-5NU7
1MCP73871Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU1
1MISOTestPoint:TestPoint_Pad_D1.0mmTP2
1MOSITestPoint:TestPoint_Pad_D1.0mmTP1
1RESETUSLPT2819DT2TR:SW_USLPT2819DT2TRS2
1SCLKTestPoint:TestPoint_Pad_D1.0mmTP3
1SS-52400-003C_TYPE:BELFUSE_SS-52400-003J1
1TEMT6000X01TEMT6000X01:TRANS_TEMT6000X01Q1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U5
1W25Q32JVSSIQW25Q32JVSSIQ:SOIC127P790X216-8NU6

Similar boards

  • 4 layers90 × 54 mmESP - 32 IOT PCB, the printed circuit board in 3D

    ESP - 32 IOT PCB

    Raghav9git/ESP-32-IoT-PCB-Board-

    A compact 4-layer IoT development board built around the ESP32-C3, integrating environmental sensing, local storage, USB-C power with LiPo battery management, and a programming/debug interface on a single board.

    82 partsMIT
  • 4 layers90 × 54.7 mm1st ESP32 Demo project, the printed circuit board in 3D

    1st ESP32 Demo project

    ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB

    ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial

    87 parts
  • 4 layers77.5 × 59.5 mmIOT, the printed circuit board in 3D

    IOT

    aryan-asit/Telemetry-iot-project

    In this project , a 4 layer custom pcb is made for Telematics

    85 parts1
  • 4 layers82.9 × 53.8 mmESP32 IoT Project, the printed circuit board in 3D

    ESP32 IoT Project

    EngMeesh/ESP32_IoT_Dev_Board

    A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

    92 parts1MIT
  • 4 layers85.7 × 58.1 mmESP32 IoT 4-layer PCB, the printed circuit board in 3D

    ESP32 IoT 4-layer PCB

    SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB

    4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.

    89 parts1
  • 4 layers87.9 × 55.4 mmKIcad 9 ESP32 custom board, the printed circuit board in 3D

    KIcad 9 ESP32 custom board

    JoseSanchez122/ESP32_custom_board

    Custom ESP32-WROOM-32 PCB with DHT22 (temperature/humidity), BH1750 (light), and MPU-6050 (motion) sensors, 3.3V regulator, USB-C/battery input, Wi-Fi/Bluetooth, GPIO/I2C pins, LED, and reset button, for compact IoT…

    87 parts
  • 4 layers99.6 × 55.8 mmEsp32-sensor board, the printed circuit board in 3D

    Esp32-sensor board

    marwantm/esp32-sensor-board

    ESP32-C3 IoT sensor node with USB-C power path management — KiCad PCB design project

    86 parts
  • 4 layers89.3 × 63 mmESP32 ON BOARD SENSOR, the printed circuit board in 3D

    ESP32 ON BOARD SENSOR

    krishnaverma24/ESP32-4Layer-PCB-Design

    This project is a custom-designed PCB integrating the ESP32 microcontroller with multiple sensors on a single board. The goal was to create a compact, versatile hardware platform for IoT and embedded system experiments.

    87 partsMIT

Questions

How big is the IOT development board PCB?

It measures 81.4 × 53.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the IOT development board use?

89 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and CP2102N-A02-GQFN20R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IOT development board KiCad files?

From the vinod-gunda/4_layer_IOT_Development_Board repository on GitHub, at the commit this page was made from: the board is IOT_development_board.kicad_pcb and its schematic ESP32_C3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IOT development board design in my own project?

Its repository states no licence, so its author keeps all rights: ask vinod-gunda before reusing the design.