Skip to the content
4 layers89.3 × 63 mmESP32 ON BOARD SENSOR, the printed circuit board in 3D

This project is a custom-designed PCB integrating the ESP32 microcontroller with multiple sensors on a single board. The goal was to create a compact, versatile hardware platform for IoT and embedded system experiments. The board supports sensor data acquisition, wireless communication, and real-time monitoring. Key Features:

Size
89.3 × 63 mm
Copper layers
4
Thickness
1.6 mm
Parts
87
Nets
86
Pads
320
Tracks, vias
749, 227
Pours
12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Jul 2026
Updated
5 Jul 2026

Overview

ESP32 ON BOARD SENSOR is an open-source printed circuit board by krishnaverma24, from the krishnaverma24/ESP32-4Layer-PCB-Design repository on GitHub, published under the MIT licence. It is a 4-layer board of 89.3 × 63 mm with 87 parts on 86 nets, routed with 749 tracks and 227 vias.

It is built around the ESP32-C3-WROOM-02-H4, BME280 and CP2102N-A02-GQFN20R, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 32 resistors, 20 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.

Main components

12

README

README.md

ESP32 All-Sensor Board (4-Layer PCB Design)

📖 Overview

This repository contains the design files for a custom 4-layer PCB integrating the ESP32 microcontroller with multiple sensors and supporting circuits.
The board is designed as a compact all-in-one sensor platform for IoT and embedded system experiments. It includes sensor interfaces, amplifier circuits, and a regulated power section, making it suitable for real-world prototyping and academic projects.


⚙️ Features

  • ESP32 Microcontroller
    • Dual-core processor with Wi-Fi + Bluetooth
    • GPIO breakout pins for external modules
  • Integrated Sensors
    • BMP90 sensor for pressure and temperature measurement
    • Humidity sensor interface for environmental monitoring
  • Amplifier System
    • Signal conditioning stage for sensor outputs
    • Designed for clean analog-to-digital conversion
  • Power Section
    • LDO-based regulation for 3.3V and 5V rails
    • Separate copper planes for power and ground
    • Decoupling capacitors for noise reduction
  • PCB Design
    • 4-layer stack-up for optimized routing
    • Dedicated copper planes for stability
    • Compact layout with clear separation of analog and digital sections

📂 Repository Contents

  • /schematics → Circuit schematic files (.sch, .pdf)
  • /pcb_layout → PCB design files (.kicad_pcb, EasyEDA exports)
  • /gerber → Gerber files for fabrication
  • /images → PCB screenshots (top layer, bottom layer, 3D view)
  • README.md → Project description and usage details

🖼️ PCB Views

Top Layer Bottom Layer 3D View


🚀 Tools Used

  • EasyEDA → schematic & PCB design
  • KiCad → verification and cross-checking
  • Standard PCB workflow → Gerber export for manufacturing

🎯 Applications

  • IoT sensor fusion projects
  • Environmental monitoring (temperature, humidity, pressure)
  • Embedded system prototyping with ESP32
  • Signal conditioning experiments with amplifier circuits
  • Academic learning for PCB design and hardware integration

🛠 How to Use

  1. Clone this repository
  2. Open schematic files in EasyEDA/KiCad
  3. Review PCB layout and modify if needed
  4. Use Gerber files for fabrication
  5. Assemble components and test sensor outputs with ESP32 firmware

📌 Future Improvements

  • Add more sensors (gas, accelerometer, gyroscope)
  • Improve amplifier stage for higher accuracy
  • Add USB-C power input and charging circuit
  • Integrate OLED display for real-time sensor data

📜 License

This project is licensed under the MIT License – feel free to use, modify, and share with proper credit.

Parts

87
QtyValueFootprintReferences
110.1uFCapacitor_SMD:C_0805_2012MetricC4, C5, C7, C10, C11, C12, C15, C16, C17, C18, C19
6470Resistor_SMD:R_0805_2012MetricR3, R4, R5, R9, R13, R14
6LTST-C170KRKTLTST-C170KRKT:DIOC200X125X110LED1, LED2, LED3, LED4, LED5, LED6
510KResistor_SMD:R_0805_2012MetricR20, R26, R30, R31, R32
410uFT491A106M016AT:RESC3216X125NC2, C3, C13, C14
450Resistor_SMD:R_0805_2012MetricR12, R17, R18, R19
31uFCapacitor_SMD:C_0805_2012MetricC6, C9, C20
32KResistor_SMD:R_0805_2012MetricR10, R21, R22
210kResistor_SMD:R_0805_2012MetricR6, R7
21MResistor_SMD:R_0805_2012MetricR23, R24
24K7Resistor_SMD:R_0805_2012MetricR25, R27
25K1Resistor_SMD:R_0805_2012MetricR1, R2
2BC817Package_TO_SOT_SMD:SOT-23Q2, Q3
10,1uFCapacitor_SMD:C_0805_2012MetricC1
10ZCH0110AF2E0ZCH0110AF2E:FUSC3225X100NF1
1100KResistor_SMD:R_0805_2012MetricR28
11KResistor_SMD:R_0805_2012MetricR11
120KResistor_SMD:R_0805_2012MetricR8
122K1Resistor_SMD:R_0805_2012MetricR15
14.7uFT491A106M016AT:RESC3216X125NC8
147K5Resistor_SMD:R_0805_2012MetricR16
1B2B-PH-SM4-TBB2B-PH-SM4-TB:JST_B2B-PH-SM4-TBJ2
1BME280BME280:PSON65P250X250X100-8NU7
1BOOTUSLPT2819DT2TR:SW_USLPT2819DT2TRS1
1CMC-5042PF-ACCMC-5042PF-AC:CUI_CMC-5042PF-ACMK1
1CP2102N-A02-GQFN20RCP2102N-A02-GQFN20R:SILABS_CP2102N-A02-GQFN20RU3
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1ESP32-C3-WROOM-02-H4ESP32-C3-WROOM-02-H4:MODULE_ESP32-C3-WROOM-02-H4U5
1GSD090012SEUGSD090012SEU:AMPHENOL_GSD090012SEUJ3
1LM1117MPX-3.3LM1117MPX-3.3:VREG_LM1117MPX-3.3VR1
1MAX4466EXKMAX4466EXK:SOT65P210X110-5NU6
1MCP73871-2CAI_MLMCP73871-2CAI_ML:QFN50P400X400X100-21NU1
1RResistor_SMD:R_0805_2012MetricR29
1RESETUSLPT2819DT2TR:SW_USLPT2819DT2TRS2
1SS-52400-003SS-52400-003:BELFUSE_SS-52400-003J1
1TEMT6000X01TEMT6000X01:TRANS_TEMT6000X01Q1
1Test CSTestPoint:TestPoint_Pad_D1.0mmCS_TST_P
1Test CS_SDTestPoint:TestPoint_Pad_D1.0mmTP4
1Test MOSI_DITestPoint:TestPoint_Pad_D1.0mmTP1
1Test MOSI_DOTestPoint:TestPoint_Pad_D1.0mmMOSI_TST_P
1Test SCLKTestPoint:TestPoint_Pad_D1.0mmTP3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1W25Q32JVSSIQW25Q32JVSSIQ:SOIC127P790X216-8NU4

The 83 most common of 87 parts.

Similar boards

  • 4 layers90 × 54 mmESP - 32 IOT PCB, the printed circuit board in 3D

    ESP - 32 IOT PCB

    Raghav9git/ESP-32-IoT-PCB-Board-

    A compact 4-layer IoT development board built around the ESP32-C3, integrating environmental sensing, local storage, USB-C power with LiPo battery management, and a programming/debug interface on a single board.

    82 partsMIT
  • 4 layers81.4 × 53.2 mmIOT development board, the printed circuit board in 3D

    IOT development board

    vinod-gunda/4_layer_IOT_Development_Board

    4-layer ESP32-C3 development board designed using KiCad

    89 parts
  • 4 layers90 × 54.7 mm1st ESP32 Demo project, the printed circuit board in 3D

    1st ESP32 Demo project

    ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB

    ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial

    87 parts
  • 4 layers77.5 × 59.5 mmIOT, the printed circuit board in 3D

    IOT

    aryan-asit/Telemetry-iot-project

    In this project , a 4 layer custom pcb is made for Telematics

    85 parts1
  • 4 layers82.9 × 53.8 mmESP32 IoT Project, the printed circuit board in 3D

    ESP32 IoT Project

    EngMeesh/ESP32_IoT_Dev_Board

    A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…

    92 parts1MIT
  • 4 layers78.7 × 53.4 mmESP32-project, the printed circuit board in 3D

    ESP32-project

    pravinsharma15k-ops/ESP32-C3-Sensor-Board

    Battery-powered ESP32-C3 sensor board with USB-C charging, KiCad 10 design files

    88 parts1
  • 4 layers85.7 × 58.1 mmESP32 IoT 4-layer PCB, the printed circuit board in 3D

    ESP32 IoT 4-layer PCB

    SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB

    4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.

    89 parts1
  • 4 layers87.9 × 55.4 mmKIcad 9 ESP32 custom board, the printed circuit board in 3D

    KIcad 9 ESP32 custom board

    JoseSanchez122/ESP32_custom_board

    Custom ESP32-WROOM-32 PCB with DHT22 (temperature/humidity), BH1750 (light), and MPU-6050 (motion) sensors, 3.3V regulator, USB-C/battery input, Wi-Fi/Bluetooth, GPIO/I2C pins, LED, and reset button, for compact IoT…

    87 parts

Questions

How big is the ESP32 ON BOARD SENSOR PCB?

It measures 89.3 × 63 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ESP32 ON BOARD SENSOR use?

87 parts, built around the ESP32-C3-WROOM-02-H4, BME280, CP2102N-A02-GQFN20R and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 ON BOARD SENSOR KiCad files?

From the krishnaverma24/ESP32-4Layer-PCB-Design repository on GitHub, at the commit this page was made from: the board is ESP32 ON BOARD SENSOR.kicad_pcb and its schematic ESP32 ON BOARD SENSOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 ON BOARD SENSOR design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).