Skip to the content
2 layers80 × 46 mmRGB LED Controller, the printed circuit board in 3D

A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

Size
80 × 46 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
20
Pads
63
Tracks, vias
88, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Sep 2026
Updated
22 Sep 2026

Overview

RGB LED Controller is an open-source printed circuit board by manoj5373, from the manoj5373/KiCad-Hardware-Lab repository on GitHub. It is a 2-layer board of 80 × 46 mm with 27 parts on 20 nets, routed with 88 tracks and 0 vias.

It is built around the NE555D. Its parts include 8 resistors, 5 connectors, 3 capacitors, 3 diodes and 3 transistors. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

🔧 KiCad Hardware Lab

A collection of practical electronics and PCB design projects developed using KiCad.

This repository documents my hands-on work in analog electronics, digital electronics, power electronics, PCB design, and embedded hardware.


📚 Projects

#ProjectCategory
14-bit Binary CounterDigital Electronics
2Full Wave RectifierPower Electronics
3Half Wave RectifierPower Electronics
4Inverting AmplifierAnalog Electronics
5NAND GateDigital Electronics
6Non-Inverting AmplifierAnalog Electronics
7RGB LED ControllerEmbedded Electronics
8Voltage RegulatorPower Electronics

More projects will be added as the hardware design work continues.


🛠️ Tools & Technologies

  • KiCad – Schematic capture and PCB design
  • PCB Layout & Design
  • Electronic Circuit Design
  • Analog Electronics
  • Digital Electronics
  • Power Electronics
  • Gerber Generation
  • PCB Fabrication Preparation

📂 Repository Structure

Each project contains the KiCad design files required to open and continue working on the project.

text
KiCad-Hardware-Lab/
│
├── 4-bit-Binary-Counter/
├── Full-Wave-Rectifier/
├── Half-Wave-Rectifier/
├── Inverting-Amplifier/
├── NAND-Gate/
├── Non-Inverting-Amplifier/
├── RGB-LED-Controller/
├── Voltage-Regulator/
│
└── README.md

Parts

27
QtyValueFootprintReferences
4+9VConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2, J3, J4, J5
41kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R6, R7, R11
4PotentiometerPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalVR1, VR2, VR3, VR4
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8, R9, R10
3LEDLED_THT:LED_D5.0mmD1, D2, D3
3NPNPackage_TO_SOT_THT:TO-18-3Q1, Q2, Q3
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
110nFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
1NE555DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1

More from manoj5373/KiCad-Hardware-Lab

6
  • 2 layers64.5 × 37.5 mmBinary Counter, the printed circuit board in 3D

    Binary Counter

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    11 parts
  • 2 layers40.5 × 29 mmExp 10, the printed circuit board in 3D

    Exp 10

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    8 parts
  • 2 layers38 × 25.5 mmInverting, the printed circuit board in 3D

    Inverting

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    6 parts
  • 2 layers40 × 31.5 mmNon Inverting, the printed circuit board in 3D

    Non Inverting

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    6 parts
  • 2 layers69 × 26 mmHalfwave1, the printed circuit board in 3D

    Halfwave1

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    5 parts
  • 2 layers88 × 36 mmRegulated power supply, the printed circuit board in 3D

    Regulated power supply

    manoj5373/KiCad-Hardware-Lab

    A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

    5 parts

Similar boards

  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 2 layers140.7 × 47.4 mmEG8010 A1, the printed circuit board in 3D

    EG8010 A1

    Millisman/EG8010

    Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

    201 parts17MIT
  • 2 layers175 × 115 mmLaser Controllerv2 only for pcb test, the printed circuit board in 3D

    Laser Controllerv2 only for pcb test

    Andre1Becker/GalvOS

    Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

    122 parts11GPL-3.0
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 2 layers95 × 60 mmOpenCatFlap, the printed circuit board in 3D

    OpenCatFlap

    Alex-ala/OpenCatFlap

    Smart cat flap using Wifi+HTTP to work without a cloud.

    104 parts8
  • 2 layers39 × 66.5 mmBC250-Power, the printed circuit board in 3D

    BC250-Power

    Needleroozer/bc250-power-board

    Power Distribution PCBs for the BC-250 cards

    39 parts5
  • 6 layers210 × 119 mmClaculator Keypad, the printed circuit board in 3D

    Claculator Keypad

    Robert-Mones/Claculator

    A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.

    202 parts5
  • 2 layers155 × 30 mmRuler V2 KiCad, the printed circuit board in 3D

    Ruler V2 KiCad

    ben5049/ICRS-PCB-Ruler

    ICRS PCB ruler

    38 parts3Apache-2.0

Questions

How big is the RGB LED Controller PCB?

It measures 80 × 46 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RGB LED Controller use?

27 parts, built around the NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RGB LED Controller KiCad files?

From the manoj5373/KiCad-Hardware-Lab repository on GitHub, at the commit this page was made from: the board is RGB-LED-Controller/RGB LED Controller.kicad_pcb and its schematic 4-bit-Binary-Counter/Binary Counter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RGB LED Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask manoj5373 before reusing the design.