
RGB LED Controller
manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.
Inverting is an open-source printed circuit board by manoj5373, from the manoj5373/KiCad-Hardware-Lab repository on GitHub. It is a 2-layer board of 38 × 25.5 mm with 6 parts on 9 nets, routed with 25 tracks and 0 vias.
It is built around the AD8021AR. Its parts include 3 connectors, 2 resistors and 1 IC.
A collection of practical electronics and PCB design projects developed using KiCad.
This repository documents my hands-on work in analog electronics, digital electronics, power electronics, PCB design, and embedded hardware.
| # | Project | Category |
|---|---|---|
| 1 | 4-bit Binary Counter | Digital Electronics |
| 2 | Full Wave Rectifier | Power Electronics |
| 3 | Half Wave Rectifier | Power Electronics |
| 4 | Inverting Amplifier | Analog Electronics |
| 5 | NAND Gate | Digital Electronics |
| 6 | Non-Inverting Amplifier | Analog Electronics |
| 7 | RGB LED Controller | Embedded Electronics |
| 8 | Voltage Regulator | Power Electronics |
More projects will be added as the hardware design work continues.
Each project contains the KiCad design files required to open and continue working on the project.
KiCad-Hardware-Lab/
│
├── 4-bit-Binary-Counter/
├── Full-Wave-Rectifier/
├── Half-Wave-Rectifier/
├── Inverting-Amplifier/
├── NAND-Gate/
├── Non-Inverting-Amplifier/
├── RGB-LED-Controller/
├── Voltage-Regulator/
│
└── README.md| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02_Pin | Connector_Samtec_HPM_THT:Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm | J1, J2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | AD8021AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x03_Pin | Connector_Samtec_HPM_THT:Samtec_HPM-03-01-x-S_Straight_1x03_Pitch5.08mm | J3 |

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.

manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.



byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 38 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the AD8021AR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the manoj5373/KiCad-Hardware-Lab repository on GitHub, at the commit this page was made from: the board is Inverting-Amplifier/Inverting.kicad_pcb and its schematic 4-bit-Binary-Counter/Binary Counter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask manoj5373 before reusing the design.