2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers49.8 × 26.8 mm
Mw300breakout
Makerville/knit10The production-ready WiFi board !
- Size
- 49.8 × 26.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 43
- Pads
- 197
- Tracks, vias
- 794, 65
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Feb 2016
- Updated
- 25 Jun 2019
Overview
Mw300breakout is an open-source printed circuit board by Makerville, from the Makerville/knit repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.8 × 26.8 mm with 31 parts on 43 nets, routed with 794 tracks and 65 vias.
It is built around the CP2102. Its parts include 9 capacitors, 9 resistors, 4 ICs, 4 connectors and 2 diodes. It belongs with the radio and wireless and home automation and IoT boards of this library.
Main components
1README
hardware/Knit/README.mdKnit
Knit is a breakout board based on Azurewave's CU300 module, which is built around the MW300 WiFi microcontroller.
The breakout board consists of -
- CU300 WiFi module
- Flash
- Linear regulator
- Passive components & connectors
To find out more on how to program the board, head over makerville.io/knit
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6, C7, C8, C9 |
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R2, R3, R5 |
| 3 | 51k | Resistors_SMD:R_0603_HandSoldering | R17, R19, R20 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R1, R4 |
| 2 | CONN_01X16 | Socket_Strips:Socket_Strip_Straight_1x16 | P1, P2 |
| 1 | 1.8k | Resistors_SMD:R_0603_HandSoldering | R16 |
| 1 | 10uF 10V | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_HandSoldering | C1 |
| 1 | 22uF 10V | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_HandSoldering | C2 |
| 1 | AP1117D33 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | AWCU300 | mp3:CU300B | U2 |
| 1 | Boot | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW2 |
| 1 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P3 |
| 1 | CP2102 | Housings_DFN_QFN:QFN-28-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | LED_GREEN | LEDs:LED_0805 | D1 |
| 1 | LED_RED | LEDs:LED_0805 | D2 |
| 1 | LOGO | graphics:knit | G*** |
| 1 | RESETn | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | USB_OTG | Connect:USB_Micro-B | P4 |
| 1 | W25Q64 | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U3 |
Questions
How big is the Mw300breakout PCB?
It measures 49.8 × 26.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mw300breakout use?
31 parts, built around the CP2102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mw300breakout KiCad files?
From the Makerville/knit repository on GitHub, at the commit this page was made from: the board is hardware/Knit/mw300breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mw300breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers93 × 60 mm
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control
75 parts27 - 4 layers97.6 × 145.1 mm
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 2 layers93 × 60 mm
Hornbill lights
ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform
54 parts16 - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers25.4 × 62.9 mm
- 2 layers33.8 × 46 mm
