2 layers93 × 60 mm
Hornbill lights
ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform
54 parts16
2 layers93 × 60 mm
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our27Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control
- Size
- 93 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 274
- Pads
- 397
- Tracks, vias
- 740, 88
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Feb 2017
- Updated
- 27 Sep 2017
Overview
Hornbill Open Universal Remote is an open-source printed circuit board by ExploreEmbedded, from the ExploreEmbedded/hornbill-our repository on GitHub. It is a 2-layer board of 93 × 60 mm with 75 parts on 274 nets, routed with 740 tracks and 88 vias.
It is built around the CP2102, ESP-WROOM-32D and AP2112K-3.3, with the S8050 among its other parts. Its parts include 27 connectors, 17 resistors, 9 ICs, 8 capacitors and 6 diodes.
Main components
4
CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion Modules
ESP-WROOM-32D
-- WiFi Modules ROHSMIWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdhornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control. This is demonstration of what is possible with Hornbill ESP32 platform. To know more and support our work visit:
https://www.crowdsupply.com/explore-embedded/hornbill
#ToDo If there is enough interest in the project, we would like to add the following features:
- Add other major IR protocols. At least the once supported by IRRemote Arduino Library
- Integrate Irdb.tk api so that remotes can be add to the app during the setup. This would require internet connection only during setup.
- RemoteMaker: Add app/firmware feature to create remotes that are not available in the database.
If you've anyother suggestions that could be helpful, please raise on issue here on the repo.
App Screens
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | CONN_01X14 | Explore:EE_Pin_Header_Straight_1x14_Pitch2.54mm | P1, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12, P13, P14, P15 |
| 6 | 0E | Resistors_SMD:R_0603 | R3, R4, R5, R7, R8, R11 |
| 4 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P16, P24, P25, P26 |
| 4 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P2, P17, P18, P19 |
| 4 | LED | Explore:LED-5MM | D5, D6, D9, D10 |
| 4 | MountingHole | Mounting_Holes:MountingHole_2.5mm | U5, U6, U7, U8 |
| 2 | 0.1uF | Capacitors_SMD:C_0603 | C7, C8 |
| 2 | 0R | Resistors_SMD:R_0603 | R13, R23 |
| 2 | 10K | Resistors_SMD:R_0603 | R2, R10 |
| 2 | 12K | Resistors_SMD:R_0603 | R19, R20 |
| 2 | 15pF | Capacitors_SMD:C_0603 | C4, C5 |
| 2 | 1K | Resistors_SMD:R_0603 | R6, R9 |
| 2 | 47R | Resistors_SMD:R_0603 | R21, R22 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_2x01_Pitch2.54mm | P21, P22 |
| 2 | S8050 | Explore:SOT-23 | Q3, Q4 |
| 2 | SW_PUSH | Explore:smd_push2_New | SW1, SW2 |
| 1 | 100nF | Capacitors_SMD:C_0603 | C2 |
| 1 | 100uF | Capacitors_SMD:C_1206 | C1 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C3 |
| 1 | 2.2uF | Capacitors_SMD:C_0603 | C6 |
| 1 | 32.768KHz RTC Crystal | Explore:SMD_RTC_Crstl | Y1 |
| 1 | 500mA | Explore:Fuse_500mA | F1 |
| 1 | 680R | Resistors_SMD:R_0603 | R18 |
| 1 | AP2112K | Explore:SOT-23-5 | U1 |
| 1 | Blue | Explore:LED-0603_NEW | D2 |
| 1 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | P20 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P23 |
| 1 | CP2102 | Explore:cp2102_xl2 | U9 |
| 1 | EE_Logo | Logo:Hornbill_OUR | U3 |
| 1 | EE_Logo | Logo:Logo_8 | U4 |
| 1 | ESP-WROOM-32 | Explore:ESP-32S | M1 |
| 1 | LED | Explore:LED-0603_NEW | D3 |
| 1 | OSH_Symbol | Explore:Logo_silk_OSHW_6x6mm | U2 |
| 1 | Q_NPN_BEC | Explore:SOT-23 | Q2 |
| 1 | USB-MINI-B | Explore:USB_Micro-B_SMD_NEW_1 | CON1 |
Questions
How big is the Hornbill Open Universal Remote PCB?
It measures 93 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hornbill Open Universal Remote use?
75 parts, built around the CP2102, ESP-WROOM-32D, AP2112K-3.3 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hornbill Open Universal Remote KiCad files?
From the ExploreEmbedded/hornbill-our repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/Hornbill Open Universal Remote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hornbill Open Universal Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask ExploreEmbedded before reusing the design.
Similar boards
- 6 layers91.4 × 92.5 mm
PCB CableUndefined1stPrototype 2024-02-18
Ne-Se-Chete/CableUndefined-Embedded
AI-powered intelligent breadboard that digitally routes circuit connections using an STM32-controlled multiplexer matrix
218 parts1 - 6 layers131 × 80 mm
OpenHardwareHolterMonitor
OpenElectronicsLab/OpenHardwareHolterMonitor
OpenHardware ECG Holter Monitor
165 parts9GPL-3.0 - 4 layers160 × 100 mm
OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts - 2 layers97.1 × 97.1 mm
ESP32 IMU Module V1.1
shaun-lloyd/dev-ardupilot-obal
ArduPi is an open hardware Raspberry Pi hat to run Ardupilot.
87 parts2CC0-1.0 - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers33.8 × 46 mm
- 2 layers112 × 48.8 mm
