2 layers100 × 100 mm
Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26
2 layers25.4 × 62.9 mm
ATMega128 Breakout
ExploreEmbedded/oneMicro-ATmega1288- Size
- 25.4 × 62.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 94
- Pads
- 201
- Tracks, vias
- 766, 79
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jul 2016
- Updated
- 6 Oct 2016
Overview
ATMega128 Breakout is an open-source printed circuit board by ExploreEmbedded, from the ExploreEmbedded/oneMicro-ATmega128 repository on GitHub. It is a 2-layer board of 25.4 × 62.9 mm with 30 parts on 94 nets, routed with 766 tracks and 79 vias.
It is built around the ATMEGA128A-AU and CP2102. Its parts include 12 connectors, 7 capacitors, 5 resistors, 3 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA128A-AU
TQFP-64(14x14)-40℃~+85℃ 10bit 128KB 16MHz 2.7V~5.5V 4KB 4KB 53 8 Bit AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion Modules
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C6, C7, C8 |
| 4 | 470r | Resistors_SMD:R_0603_HandSoldering | R2, R3, R4, R5 |
| 4 | CONN_01X01 | Connect:1pin | P6, P7, P9, P10 |
| 4 | CONN_10 | Pin_Headers:Pin_Header_Straight_1x10 | P1, P2, P3, P4 |
| 2 | 22PF | Capacitors_SMD:C_0603_HandSoldering | C1, C2 |
| 2 | LED | EE:LED-0603_NEW | D1, D3 |
| 1 | 10K | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 16Mhz_SMD | EE:16Mhz_5x3.2mm_Crystal | U2 |
| 1 | ATMEGA128-A | Housings_QFP:LQFP-64_14x14mm_Pitch0.8mm | IC1 |
| 1 | CONN_01X01 | Logo_new:Logo_8 | P5 |
| 1 | CONN_5X2 | Pin_Headers:Pin_Header_Straight_2x05 | P8 |
| 1 | CP2102 | EE:cp2102_xl2 | U1 |
| 1 | SIL8 | Pin_Headers:Pin_Header_Straight_1x08 | J2 |
| 1 | USB-MICRO-B | EE:USB_Micro-B_SMD_NEW | CON1 |
| 1 | rst | EE:smd_push2 | SW1 |
Questions
How big is the ATMega128 Breakout PCB?
It measures 25.4 × 62.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATMega128 Breakout use?
30 parts, built around the ATMEGA128A-AU and CP2102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATMega128 Breakout KiCad files?
From the ExploreEmbedded/oneMicro-ATmega128 repository on GitHub, at the commit this page was made from: the board is Design Files/Kicad Files/ATMega128_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATMega128 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask ExploreEmbedded before reusing the design.
Similar boards
- 2 layers65 × 30 mm
- 2 layers94 × 57.5 mm
ROM reader
trwgQ26xxx/FLT_module_reader
Fiat Lancia Tester modules reader for ROMs preservation
49 parts2 - 2 layers99.8 × 99.8 mm
Vikings Robotics PCB
MrBruh/Vikings-Robotics-PCB
A board with 2 ATMEGA microprocessors for controlling up to 7 DC motors and 4 servos
261 parts1 - 4 layers95.9 × 90.2 mm
Ykts payload
cansat-ptl/cubesat-boards
YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards
156 parts - 4 layers
- 2 layers
Cabinate
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.
75 parts4 - 2 layers40 × 37 mm
