2 layers55 × 35 mm
Baconbits
e-ale/BaconBitsCapeHW
Design files for the Bacon Bits MiniCape for the PocketBeagle
64 parts23
4 layers
Rfsniffer
s3c/rfpirateGeneral purpose ISM interfacing hardware based on the CC1101
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 101
- Pads
- 435
- Tracks, vias
- 506, 65
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 17 Jun 2014
- Updated
- 28 Oct 2014
Overview
Rfsniffer is an open-source printed circuit board by s3c, from the s3c/rfpirate repository on GitHub. It is a 4-layer board with 140 parts on 101 nets, routed with 506 tracks and 65 vias.
It is built around the ATMEGA128A-AU, FT230XQ-R and MCP1640-I/MC, with the DS1307Z+, BC817 and BC807 among its other parts. Its parts include 58 resistors, 22 capacitors, 12 ICs, 12 diodes and 11 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA128A-AU
TQFP-64(14x14)-40℃~+85℃ 10bit 128KB 16MHz 2.7V~5.5V 4KB 4KB 53 8 Bit AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XQ-R
QFN-16-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-16-EP(4x4) USB Converters ROHSFTDIUSB ConvertersMCP1640-I/MC
DFN-8(2x3)-40℃~+125℃@(TJ) 1 19uA 2V~5.5V 350mA 500kHz 800mV~5.5V Adjustable Boost Boost Built-in Yes DFN-8(2x3) DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
DS1307Z+
SO-80℃~+70℃ 10nA 300nA 4.5V~5.5V Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output External I2C SO-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
READMErfpirate
General purpose ISM interfacing hardware based on the CC1101
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 330 | SM0805 | R1, R2, R10, R11, R14, R16, R18, R20, R37, R38, R39, R40, R41, R42, R43, R44 +7 |
| 15 | 10k | SM0805 | R3, R4, R7, R8, R9, R12, R13, R15, R17, R23, R25, R46, R52, R55, R56 |
| 12 | LED | LED-1206 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D12, D13 |
| 10 | 1uF | SM0805 | C1, C2, C8, C9, C12, C14, C15, C18, C20, C21 |
| 8 | SW_PUSH | TD-85XU | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | 4.7k | SM0805 | R21, R22, R24, R33, R45, R53, R54 |
| 4 | BC817 | SOT23EBC | Q1, Q3, Q5, Q7 |
| 4 | P*** | 1pin | 1PIN, 1PIN, 1PIN, 1PIN |
| 3 | 0.1uF | SM0805 | C4, C17, C19 |
| 3 | 4.7uF | SM1206 | C7, C10, C11 |
| 3 | BC807 | SOT23EBC | Q2, Q4, Q6 |
| 3 | CONN_2 | PIN_ARRAY_2X1 | P4, P6, P7 |
| 3 | CONN_3 | PIN_ARRAY_3X1 | K1, K2, K3 |
| 3 | R | SM0805 | R19, R57, R58 |
| 2 | 100nF | SM0805 | C6, C16 |
| 2 | 12k | SM0805 | R29, R34 |
| 2 | 18pF | SM0805 | C3, C5 |
| 2 | 25LCXXXX | SO8N | U2, U3 |
| 2 | 27 | SM0805 | R31, R32 |
| 2 | 30k | SM0805 | R30, R35 |
| 1 | 100nH | SM0805 | L1 |
| 1 | 10uF | SM1206 | C13 |
| 1 | 2k | SM0805 | R26 |
| 1 | 309k | SM0805 | R27 |
| 1 | 60 | SM0805 | R36 |
| 1 | 976k | SM0805 | R28 |
| 1 | ATMEGA128A-A | TQFP_64 | IC1 |
| 1 | AVR_ISP | pin_array_3x2 | P2 |
| 1 | BATTERY | CR1220H | BT1 |
| 1 | C | SM1206 | C22 |
| 1 | CONN_2 | S2B-XH-A | P1 |
| 1 | CONN_4 | PIN_ARRAY_4x1 | P5 |
| 1 | CONN_5 | PIN_ARRAY_5x1 | P3 |
| 1 | CRYSTAL | LFXTAL002997 | X2 |
| 1 | CRYSTAL | TSX-3225 | X1 |
| 1 | DS1307 | SO8E | U5 |
| 1 | FT230X | SSOP17 | U9 |
| 1 | INDUCTOR | LQH44P | 4.7u1 |
| 1 | LCD5110 | LCD5110 | U8 |
| 1 | MCP112 | SOT23 | U1 |
| 1 | MCP1640 | SOT23_6 | U6 |
| 1 | MCP1802 | SOT23-5 | U7 |
| 1 | MCP73832 | SOT23-5 | U4 |
| 1 | OPTO8 | SO8E | U11 |
| 1 | RFC-1100C | RFC-1100C | U10 |
| 1 | SPEAKER | BUZZER_12MM | SP1 |
| 1 | USB-MINI-B | USB_MINI_B | CON1 |
Questions
What parts does the Rfsniffer use?
140 parts, built around the ATMEGA128A-AU, FT230XQ-R, MCP1640-I/MC and DS1307Z+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rfsniffer KiCad files?
From the s3c/rfpirate repository on GitHub, at the commit this page was made from: the board is Hardware/rfsniffer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rfsniffer design in my own project?
Its repository states no licence, so its author keeps all rights: ask s3c before reusing the design.
Similar boards
- 2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers140 × 100 mm
- 2 layers100 × 100 mm
Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26 - 2 layers25.4 × 62.9 mm
- 2 layers65 × 30 mm
- 2 layers94 × 57.5 mm
ROM reader
trwgQ26xxx/FLT_module_reader
Fiat Lancia Tester modules reader for ROMs preservation
49 parts2 - 2 layers99.8 × 99.8 mm
Vikings Robotics PCB
MrBruh/Vikings-Robotics-PCB
A board with 2 ATMEGA microprocessors for controlling up to 7 DC motors and 4 servos
261 parts1