Skip to the content
2 layers89.5 × 76.5 mm395MainBoard, the printed circuit board in 3D

395MainBoard

lutetjeff/ece395

Repository for UIUC ECE395 project known as RHipoff. A mixture of the Rhythm Horizon and RE:Flex Dance platforms built from the ground up.

Size
89.5 × 76.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
53
Pads
187
Tracks, vias
313, 46
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Oct 2024
Updated
14 Dec 2024

Overview

395MainBoard is an open-source printed circuit board by lutetjeff, from the lutetjeff/ece395 repository on GitHub. It is a 2-layer board of 89.5 × 76.5 mm with 45 parts on 53 nets, routed with 313 tracks and 46 vias.

It is built around the TCAN3414DRB and TLV76733DGNR. Its parts include 12 connectors, 11 capacitors, 5 resistors, 4 ICs and 2 switches. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

Repository for UIUC ECE395 project known as RHipoff. A mixture of the Rhythm Horizon and RE:Flex Dance platforms built from the ground up. Current configuration is for four load cells only, but firmware supports up to 16 different panels with four load cells each.

Parts

45
QtyValueFootprintReferences
70.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C7, C10, C11
5TestPointTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3, TP4, TP5
32.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6, C9
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2
10Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
1120Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
11uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1Conn_01x03Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ2
1DAUGHTER0Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ3
1DAUGHTER1Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ4
1DAUGHTER2Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ5
1DAUGHTER3Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ6
1DAUGHTER4Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ7
1DAUGHTER5Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ8
1DAUGHTER6Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ9
1DAUGHTER7Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ10
1DAUGHTER8Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ11
1DKM30F-12NLibrary:DKM30F-12NU4
1Jack-DCConnector_BarrelJack:BarrelJack_HorizontalJ12
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1LOGOLibrary:the jG***
1STM32H533CETx1Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1TCAN3414DRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1TLV76733DGNRPackage_SO:VSSOP-8_3x3mm_P0.65mmU3
1USB_AConnector_USB:USB_A_Molex_67643_HorizontalJ13

The 41 most common of 45 parts.

More from lutetjeff/ece395

2
  • 2 layers76.2 × 76.2 mmCorner board wson6, the printed circuit board in 3D

    Corner board wson6

    lutetjeff/ece395

    Repository for UIUC ECE395 project known as RHipoff. A mixture of the Rhythm Horizon and RE:Flex Dance platforms built from the ground up.

    61 parts
  • 2 layers27.9 × 40.6 mmEx4, the printed circuit board in 3D

    Ex4

    lutetjeff/ece395

    Repository for UIUC ECE395 project known as RHipoff. A mixture of the Rhythm Horizon and RE:Flex Dance platforms built from the ground up.

    25 parts

Similar boards

  • 2 layers51.5 × 63 mmSensor Reader V4, the printed circuit board in 3D

    Sensor Reader V4

    Inverated/Proa-II-Electrical-Setup

    Complete electical design and microcontroller code

    70 parts
  • 4 layers90.2 × 95.9 mmTET, the printed circuit board in 3D

    TET

    ICDT-Inatel-Cubesat-Design-Team/TET-Module

    A reliable 1U CubeSat TT&C subsystem featuring an STM32L4 MCU, LoRa radio for long-range communication, CAN Bus, and TMR SPI Flash for critical space applications.

    87 parts5CERN-OHL-W-2.0
  • 4 layers50.1 × 85.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-R

    The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    89 parts4
  • 4 layers50.2 × 40.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-Mini

    The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    88 parts2
  • 4 layers110 × 75 mmMainBoard nonRJ45, the printed circuit board in 3D

    MainBoard nonRJ45

    Gold-Rush-Robotics/pcb_2024

    A repository to store work done on PCBs for the 2024 season

    85 parts1MIT
  • 2 layers50 × 31 mmSpeedCadence, the printed circuit board in 3D

    SpeedCadence

    hpvdt/typhoon_speed_cadence

    39 parts

Questions

How big is the 395MainBoard PCB?

It measures 89.5 × 76.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 395MainBoard use?

45 parts, built around the TCAN3414DRB and TLV76733DGNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 395MainBoard KiCad files?

From the lutetjeff/ece395 repository on GitHub, at the commit this page was made from: the board is 395MainBoard/395MainBoard.kicad_pcb and its schematic 395MainBoard/395MainBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 395MainBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask lutetjeff before reusing the design.