Skip to the content
2 layers48.7 × 22.5 mmAirsticks pcb, the printed circuit board in 3D

Airsticks pcb

lizboyer/Airsticks1

Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created. The user puts the velcro cuffs onto a pair of drum sticks and - based off of the orientation and acceleration of the sticks- can play through drumset samples.

Size
48.7 × 22.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
61
Pads
188
Tracks, vias
197, 27
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
29 Aug 2023
Updated
13 Dec 2023

Overview

Airsticks pcb is an open-source printed circuit board by lizboyer, from the lizboyer/Airsticks repository on GitHub. It is a 2-layer board of 48.7 × 22.5 mm with 69 parts on 61 nets, routed with 197 tracks and 27 vias.

It is built around the STM32G441KBT6, PAM8302AASCR and TC1262-3.3VDB. Its parts include 7 connectors, 5 capacitors, 3 ICs and 1 resistor. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

3

README

README.md

Airsticks-Advanced-Digital-Systems-Lab-Project

Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created. The user puts the velcro cuffs onto a pair of drum sticks and - based off of the orientation and acceleration of the sticks- can play through drumset samples.

How To Use:

The project can be cloned onto the users local computer by running: “git clone https://github.com/lizboyer/Airsticks-Advanced-Digital-Systems-Lab-Project.git [name of new directory]” The “main” branch contains a directory called “10-6-sine,” which should be run via STM32CubeIDE on the STM32F407 Discovery Kit to playback the audio files of the drum noises. The other directory, “firmware_with_directions_sound” should be run on the STM32G4 on our PCB.

If a serial device is used to read directional output, Picocom or Putty can be used to print those outputs via UART, at a baud rate of 19200.

Parts

69
QtyValueFootprintReferences
48, , , , , , , , , , , , , , , +32
31uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C5, C6
3I2CConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4, J4, J4
2LSM6DSOTRPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yxlr_left1, xlr_right1
10.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1AudioJack3Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ5
1PAM8302AASPackage_SO:SO-8_3.9x4.9mm_P1.27mmU4
1STM32G441KBT6Varistor:STM32G441KBT6 LQFP-32U1
1STM_LINKConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ2
1TC1262-33Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4085J1
1USB_SERIAL_TTLConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3

The 66 most common of 69 parts.

Similar boards

  • 4 layers50 × 50 mmPicr 1 9tdi, the printed circuit board in 3D

    Picr 1 9tdi

    ducman1998/basket-ball-robot

    DeltaX Basketball Track robot (University of Tartu) | Source code, robot design and electronic schematics |🥉Won 3rd place out of 10 teams | The fastest robot in the competition

    84 parts1
  • 2 layers64.7 × 35.3 mmStm32g441kbt6 development, the printed circuit board in 3D

    Stm32g441kbt6 development

    jalikins/STM32_bazel_development

    This repository contains a hermetic Bazel build configuration for STM32 microcontrollers (specifically targeting the STM32G4 series).

    57 partsMIT
  • 4 layers75 × 25 mmIntro Board v1, the printed circuit board in 3D

    Intro Board v1

    pc-neal/MoonPCB

    Ashur, Patrick, and Matthew "Floppy Balls" Schettino

    67 parts
  • 2 layers100 × 60 mmDREAM, the printed circuit board in 3D

    DREAM

    Reemuson/MENG4210-Project

    Data Recording and Electrophysiological Acquisition Module

    137 partsMIT
  • 4 layers81.5 × 34.5 mmIntroBoard, the printed circuit board in 3D

    IntroBoard

    SunDevilRocketry/IntroBoard2025

    Demo board for intro team

    58 parts
  • 4 layers64.3 × 70.4 mmVETO BOX V0.0.1, the printed circuit board in 3D

    VETO BOX V0.0.1

    va-cyber-zha/VETO_BOX_V0.0.1

    Cosmic veto box - Scintillator box with SIPMs measuring cosmic radiation. Inside the box will be placed test subject, and with the PCB I designed, filter out the cosmic noise from a measurement.

    119 partsMIT
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69

Questions

How big is the Airsticks pcb PCB?

It measures 48.7 × 22.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Airsticks pcb use?

69 parts, built around the STM32G441KBT6, PAM8302AASCR and TC1262-3.3VDB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Airsticks pcb KiCad files?

From the lizboyer/Airsticks repository on GitHub, at the commit this page was made from: the board is pcb/airsticks_pcb.kicad_pcb and its schematic pcb/airsticks_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Airsticks pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask lizboyer before reusing the design.