4 layers128 × 68 mm
2 layers83.8 × 45.7 mm
Tps25200 v1
light655/EENight_light_danceDon't try this at home.
- Size
- 83.8 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 9
- Pads
- 31
- Tracks, vias
- 24, 9
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Feb 2024
- Updated
- 28 Apr 2024
Overview
Tps25200 v1 is an open-source printed circuit board by light655, from the light655/EENight_light_dance repository on GitHub. It is a 2-layer board of 83.8 × 45.7 mm with 14 parts on 9 nets, routed with 24 tracks and 9 vias.
It is built around the TPS25200DRVR. Its parts include 5 connectors, 3 resistors, 2 capacitors, 1 IC and 1 diode.
Main components
1README
readme.md把電還給機之夜
Don't try this at home.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J5 |
| 2 | 10k ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5 |
| 1 | 0.1 uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 22 uf | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C2 |
| 1 | 30k ohm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 80K ohm(set Ilim to 1.2A) | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rlim1 |
| 1 | Battery_Cell | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | TPS25200DRVR | tps25200:DRV6_1X1P6_TEX | U1 |
Questions
How big is the Tps25200 v1 PCB?
It measures 83.8 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tps25200 v1 use?
14 parts, built around the TPS25200DRVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tps25200 v1 KiCad files?
From the light655/EENight_light_dance repository on GitHub, at the commit this page was made from: the board is tps25200_v1/test.kicad_pcb and its schematic AC_switch/AC_triac_switch/AC_triac_switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tps25200 v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask light655 before reusing the design.
More from light655/EENight_light_dance
3- 2 layers47 × 37 mm
- 2 layers22 × 27 mm
Similar boards
- 2 layers92 × 92 mm
Sanket 4.0
Student-Satellite-IITB/Communication-Subsystem
Communication Subsystem for IITBSSP CubeSat Mission
52 parts3 - 2 layers40 × 43 mm
- 8 layers74 × 128 mm
Limejig
taskx6004/limejig
Open-source LimeJig fixture firmware, host tools, KiCad source, and synthetic test examples
92 parts1MIT - 4 layers78.5 × 59 mm
Syncro mainboard
deadbandlabs/syncro-mainboard
Hardware Design for Syncro FFB Interceptor
158 partsCERN-OHL-W-2.0 - 4 layers64.8 × 62.7 mm
- 2 layers46.9 × 34.3 mm
- 2 layers98.1 × 30.4 mm
3v3-regulator
icarofcb/3.3V-Car-Voltage-Regulator-Grade-board
3.3V Car Voltage Regulator Grade board hardware
41 parts - 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0