

BMS hardware
Don't try this at home.
- Size
- 47 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 17
- Pads
- 75
- Tracks, vias
- 70, 6
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Feb 2024
- Updated
- 28 Apr 2024
Overview
BMS hardware is an open-source printed circuit board by light655, from the light655/EENight_light_dance repository on GitHub. It is a 2-layer board of 47 × 37 mm with 27 parts on 17 nets, routed with 70 tracks and 6 vias.
It is built around the MAX6605, RT9187BGB and TPS25200DRVR, with the 1N5819WS among its other parts. Its parts include 12 resistors, 7 capacitors, 4 connectors, 3 ICs and 1 diode. It belongs with the power boards of this library.
Main components
4MAX6605
UncategorisedMaxim Integrated (Analog Devices)RT9187BGB
SOT-23-5-40℃~+125℃@(Tj) 1 200mV@(500mA) 5.5V 500uA 50dB@(10kHz) 600mA 800mV~5.3V Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS25200DRVR
WSON-6-EP(2x2)-40℃~+125℃ 2.5A 2.5V~6.5V 70mΩ Active High High Side Switch Overvoltage protection、Output discharge function、Soft-start、Under-voltage lockout、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、Reverse current blocking WSON-6-EP(2x2) Power Distribution Switches ROHSTexas InstrumentsSupervisor And Reset ICs1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
README
readme.md把電還給機之夜
Don't try this at home.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9 |
| 3 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4, C5, C6 |
| 3 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2, J4 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7 |
| 2 | 300k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 300k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 22u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | MAX660 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RT9187B | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | TPS25200DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U1 |
More from light655/EENight_light_dance
3- 4 layers128 × 68 mm

- 2 layers22 × 27 mm

- 2 layers83.8 × 45.7 mm

Similar boards
- 2 layers49.8 × 52.7 mm

- 2 layers36.2 × 16.4 mm

- 4 layers103.1 × 63.5 mm

EMG2
Janosinth/3-Channel_EMG_PCB
A forearm-focused EMG sensor with 3 channels. Useful for identifying finger or general forearm muscle movements.
106 parts - 2 layers54.8 × 36.8 mm

- 2 layers92 × 92 mm

Sanket 4.0
Student-Satellite-IITB/Communication-Subsystem
Communication Subsystem for IITBSSP CubeSat Mission
52 parts3 - 2 layers40 × 43 mm

- 8 layers74 × 128 mm

Limejig
taskx6004/limejig
Open-source LimeJig fixture firmware, host tools, KiCad source, and synthetic test examples
92 parts1MIT - 4 layers78.5 × 59 mm

Syncro mainboard
deadbandlabs/syncro-mainboard
Hardware Design for Syncro FFB Interceptor
158 partsCERN-OHL-W-2.0
Questions
How big is the BMS hardware PCB?
It measures 47 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMS hardware use?
27 parts, built around the MAX6605, RT9187BGB, TPS25200DRVR and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS hardware KiCad files?
From the light655/EENight_light_dance repository on GitHub, at the commit this page was made from: the board is BMS/BMS_hardware/BMS_hardware.kicad_pcb and its schematic AC_switch/AC_triac_switch/AC_triac_switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask light655 before reusing the design.