2 layers
2 layers
Clock10
KIPudding/Binary_watch- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 33
- Pads
- 89
- Tracks, vias
- 197, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 May 2025
- Updated
- 12 Jul 2025
Overview
Clock10 is an open-source printed circuit board by KIPudding, from the KIPudding/Binary_watch repository on GitHub. It is a 2-layer board with 36 parts on 33 nets, routed with 197 tracks and 14 vias.
It is built around the ATTINY1616-MN. Its parts include 10 resistors, 10 diodes, 4 capacitors, 1 IC and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 50Ω | Resistor_SMD:R_0603_1608Metric | R0, R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 10 | RED | LED_SMD:LED_0603_1608Metric | D0, D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 5 | ~ | TestPoint:TestPoint_Pad_2.0x2.0mm | GS1, GS2, S1, S2, S3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | GND1, Reset1, VCC1 |
| 2 | 15pf | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 0.1 µF | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 10 µF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 2450 Battery_Cell | Library:MY-2450-03 | BT1 |
| 1 | ATtiny1616-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | Crystal | Library:FC31M2-32.768-NTLNNDTL | Y1 |
| 1 | ~ | TestPoint:TestPoint_Pad_1.5x1.5mm | GS3 |
Questions
What parts does the Clock10 use?
36 parts, built around the ATTINY1616-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock10 KiCad files?
From the KIPudding/Binary_watch repository on GitHub, at the commit this page was made from: the board is Clock/Clock10/Clock10/Clock10.kicad_pcb and its schematic Clock/Clock/Clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock10 design in my own project?
Its repository states no licence, so its author keeps all rights: ask KIPudding before reusing the design.
More from KIPudding/Binary_watch
2- 2 layers
Similar boards
- 4 layers62.1 × 83.8 mm
Ss main board
loopj/short-stack
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
69 parts804 - 2 layers80 × 50 mm
- 4 layers100 × 68 mm
- 2 layers56.9 × 23.6 mm
Hexagon
kieraneglin/hexagon-art
A passive breakout board: two lever-terminal inputs, three JST XH outputs, all six conductors (RX bus, two spares, +12V, GND, +5V) paralleled straight across. No active components, no regulation, nothing to configure.
24 parts19 - 4 layers44.5 × 44.5 mm
Flashlight
engineerbo/flashlight-dev-hw
This repository contains design files for the development board for a flashlight boost driver. The test firmware can be found in the firmware repository.
73 parts15MIT - 2 layers29 × 36 mm
Flux Capacitor Micro Pin Badge
hojadurdy/Flux_Capacitor_Micro
A tiny (36mm x 29mm) pin badge and keychain PCB version of Flux Capacitor featuring 25 animated LEDs that animate to create the “fluxxing” effect.
48 parts6 - 4 layers50.3 × 21.5 mm
- 2 layers25.4 × 52 mm
