
Linear actuator
kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:

A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:
Linear actuator is an open-source printed circuit board by kingoflolz, from the kingoflolz/linear-actuator-hardware repository on GitHub. It is a 4-layer board of 150 × 101 mm with 204 parts on 105 nets, routed with 885 tracks and 5,538 vias.
It is built around the FDMF3170, OPA4340UA and KXTJ3-1057. Its parts include 117 capacitors, 40 resistors, 16 diodes, 10 ICs and 7 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:
Files in this repository are licensed under the Apache-2.0 license
| Qty | Value | Footprint | References |
|---|---|---|---|
| 62 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C28, C29, C30, C31, C32, C33, C34, C35, C37, C38, C39, C40, C41, C43, C44, C45 +46 |
| 27 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C11, C12, C13, C14, C100, C101, C103, C107, C108, C109, C112, C115, C116, C117, C120 +11 |
| 10 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R6, R7, R8, R11, R13, R14, R30, R35, R39 |
| 8 | 220K | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R24, R25, R26, R27, R28 |
| 8 | 6pF | Capacitor_SMD:C_0402_1005Metric | C18, C19, C20, C21, C22, C23, C24, C25 |
| 8 | D_Photo | Diode_SMD:D_0805_2012Metric | D6, D7, D8, D9, D10, D11, D12, D13 |
| 6 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C16, C92, C104, C106, C111, C119 |
| 6 | 2R | Resistor_SMD:R_0402_1005Metric | R15, R16, R36, R37, R40, R41 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R9, TH1 |
| 4 | 300R | Resistor_SMD:R_0402_1005Metric | R17, R18, R19, R20 |
| 4 | LED | Diode_SMD:D_0603_1608Metric_Castellated | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | 220nF | Capacitor_SMD:C_0402_1005Metric | C15, C110, C118 |
| 3 | 22pF | Capacitor_SMD:C_0402_1005Metric | C10, C105, C113 |
| 3 | D | Diode_SMD:D_SOD-123 | D1, D14, D16 |
| 3 | FDMF3170 | linear actuator:QFN-40_5x6_Pitch0.45mm | U2, U9, U10 |
| 3 | L | linear actuator:L_10x7_H10 | L1, L3, L4 |
| 3 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1, NT2, NT3 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2, C102 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric | R10, R12 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C36, C42 |
| 2 | APE8865N-33-HF-3 | Package_TO_SOT_SMD:SOT-23 | U6, U7 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J2 |
| 2 | OPA4340UA | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3, U4 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 10uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 13K | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 1K5 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1uF | Resistor_SMD:R_0402_1005Metric | C5 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 4K7 | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 68K | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | Conn_01x02_Male | Connector_Molex:Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J4 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | KXTJ3-1057 | Package_LGA:Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4y | U11 |
| 1 | LMR16006YQ | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | STM32F412RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TL432DBZ | Package_TO_SOT_SMD:SOT-23 | D15 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J3 |

kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:

kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:




TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…

epremeaux/AVTokyo_2022_Badge
AVTokyo 2022 event badge PCB, firmware and server code.

onomondo/getting-started
Onomondo Getting Started development kit. Board design files and firmware.

FireBite/cockTag-hw
Proudly challenging the well-established Polish tracking tag industry

usnistgov/UAS-6.0-First-Responder-UAS-Wireless-Data-Gatherer-Challenge
UAS 6.0 First Responder UAS Wireless Data Gatherer Challenge
It measures 150 × 101 mm and has 4 copper layers, 1.6 mm thick.
204 parts, built around the FDMF3170, OPA4340UA and KXTJ3-1057. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kingoflolz/linear-actuator-hardware repository on GitHub, at the commit this page was made from: the board is motor_pcb/linear actuator 3/linear actuator.kicad_pcb and its schematic motor_pcb/linear actuator 3/caps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kingoflolz before reusing the design.