

CircuitBlockVoltmeter
- Size
- 66 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 25
- Pads
- 81
- Tracks, vias
- 154, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jun 2025
- Updated
- 17 Jun 2025
Overview
CircuitBlockVoltmeter is an open-source printed circuit board by ilg-physics-ucsb, from the ilg-physics-ucsb/circuitBlocks repository on GitHub. It is a 2-layer board of 66 × 41.9 mm with 25 parts on 25 nets, routed with 154 tracks and 0 vias.
It is built around the ATTINY85-20PU, OPA4340UA and LM385BZ-2.5. Its parts include 13 resistors, 3 ICs, 3 connectors, 2 capacitors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20PU
PDIP-8-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)OPA4340UA
SOIC-14-40℃~+85℃ 10pA 10pA 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 4 5.5MHz 500uV 50mA 6V/us 750uA 92dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM385BZ-2.5
TO-922.5V Micropower Voltage Reference DiodeonsemiUncategorised
README
README.mdcircuitBlocks
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8 |
| 2 | 100k 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 2 | 100k 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7, R9 |
| 2 | 1M 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14 |
| 2 | 1M 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 1 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 100k 15T | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 100u | Capacitor_THT:C_Radial_D6.3mm_H7.0mm_P2.50mm | C4 |
| 1 | 10M 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LM385BZ-2.5 | Package_TO_SOT_THT:TO-92_Inline | U5 |
| 1 | OPA4340UA | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | PowerBoost_500C | User:PowerBoost 500C | J2 |
| 1 | SSD1306_128x32_OLED | User:SSD1306_128x32_OLED | J1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
The 23 most common of 25 parts.
More from ilg-physics-ucsb/circuitBlocks
2- 2 layers22.9 × 40.6 mm

- 2 layers16.5 × 11.4 mm

Similar boards
- 2 layers138 × 77 mm

- 2 layers80 × 90 mm

- 2 layers

- 4 layers150 × 101 mm

Linear actuator
kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:
204 parts73 - 4 layers85 × 56 mm

- 2 layers46.5 × 23.4 mm

- 2 layers72.9 × 71.1 mm

AMS - CANBus Sensor - Voltage
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
44 parts - 2 layers22.2 × 46.4 mm

C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112
Questions
How big is the CircuitBlockVoltmeter PCB?
It measures 66 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CircuitBlockVoltmeter use?
25 parts, built around the ATTINY85-20PU, OPA4340UA and LM385BZ-2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CircuitBlockVoltmeter KiCad files?
From the ilg-physics-ucsb/circuitBlocks repository on GitHub, at the commit this page was made from: the board is KiCAD/CircuitBlockVoltmeter/CircuitBlockVoltmeter.kicad_pcb and its schematic KiCAD/BreakoutSOIC8/BreakoutSOIC8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CircuitBlockVoltmeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask ilg-physics-ucsb before reusing the design.