

PerfDAC buffers
Eurorack MPE implementation, 2 to 8 voices
- Size
- 46.5 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 34
- Pads
- 106
- Tracks, vias
- 209, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Nov 2017
- Updated
- 6 Nov 2026
Overview
PerfDAC buffers is an open-source printed circuit board by svgeesus, from the svgeesus/EuroMPE repository on GitHub, published under the MIT licence. It is a 2-layer board of 46.5 × 23.4 mm with 33 parts on 34 nets, routed with 209 tracks and 8 vias.
It is built around the OPA4340UA. Its parts include 16 resistors, 10 capacitors, 4 connectors and 2 ICs. It belongs with the audio and music boards of this library.
Main components
1README
README.mdEuroMPE
There are my notes-in-progress on a Eurorack MPE implementation (MIDI to control voltage). There are currently two parts:
- Polyphonic, 4 to 8 voices (historical)
- Duophonic, 2 voices
The polyphonic one was the first thing I explored, but it was eventually abandoned for two reasons. Firstly an eight-voice polyphonic system would be very expensive to build, and the quality I wanted. But more importantly I realised the sheer impracticality of a four or eight voice polyphonic system in Eurorack. Yes, there are quad modules aplenty. But they all have to be set identically which also means, unless you are an octopus, that they all have to be wiggled in unison and that is just nt feasible. And freakishly expensive. So this was shelved.
Somewhat later, after I had got myself a duophonic synth (ARP Odyssey) I came to realise that duophonic is a separate thing from fully polyphonic and from monophonic. It makes sense to use two hands and multiple fingers, because as keys lift other notes sound and this is an entirely different playing style. And I figured that MIDI Polyphonic Expression (MPE), which had always interested me, would work well with that. So the duophonic part is where all current development is happening.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100pF | Capacitor_SMD:C_0805_2012Metric | C5, C7, C8, C9, C10, C11, C12, C13 |
| 8 | 47R | Resistor_SMD:R_0805_2012Metric | R3, R6, R9, R10, R15, R16, R17, R18 |
| 8 | 4k7 | Resistor_SMD:R_0805_2012Metric | R4, R5, R7, R8, R11, R12, R13, R14 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C14 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 2 | OPA4340UA | EuroRackTools:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | PWR1 |
More from svgeesus/EuroMPE
6- 2 layers59.9 × 29.7 mm

- 2 layers32 × 55.1 mm

- 2 layers38.6 × 24.6 mm

- 2 layers40 × 26.2 mm

- 2 layers39.9 × 75.4 mm

- 2 layers38.4 × 26.2 mm

Similar boards
- 4 layers150 × 101 mm

Linear actuator
kingoflolz/linear-actuator-hardware
A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:
204 parts73 - 4 layers85 × 56 mm

- 2 layers66 × 41.9 mm

- 2 layers72.9 × 71.1 mm

AMS - CANBus Sensor - Voltage
TJLTM/Automotive-Monitoring-System-CANBus-Sensor
What is this? --- when working on my AMS solution i kept putting more and more stuff into a single box and everytime i needed to make a change it was $200 for a board that may or may not work so i decided to make it…
44 parts - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm

Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm

Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm

Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0
Questions
How big is the PerfDAC buffers PCB?
It measures 46.5 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PerfDAC buffers use?
33 parts, built around the OPA4340UA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PerfDAC buffers KiCad files?
From the svgeesus/EuroMPE repository on GitHub, at the commit this page was made from: the board is Duophonic/KiCad/PerfDAC_buffers/PerfDAC_buffers.kicad_pcb and its schematic Duophonic/KiCad/MPU-test/MPU-Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PerfDAC buffers design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).