Skip to the content
4 layersCockTag, the printed circuit board in 3D

Proudly challenging the well-established Polish tracking tag industry

Copper layers
4
Thickness
1.18 mm
Parts
46
Nets
51
Pads
143
Tracks, vias
206, 67
Pours
12
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 Nov 2022
Updated
21 Feb 2023

Overview

CockTag is an open-source printed circuit board by FireBite, from the FireBite/cockTag-hw repository on GitHub. It is a 4-layer board with 46 parts on 51 nets, routed with 206 tracks and 67 vias.

It is built around the KXTJ3-1057 and 2450AT18A100E. Its parts include 15 capacitors, 6 resistors, 2 ICs, 2 diodes and 2 inductors. It belongs with the nRF52 and nRF5x boards of this library.

Main components

2

README

README.md

cockTag-hw

Proudly challenging the well-established Polish tracking tag industry

Parts

46
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC1, C2, C5, C12, C13
412pCapacitor_SMD:C_0402_1005MetricC8, C9, C10, C11
34k7Resistor_SMD:R_0402_1005MetricR1, R2, R6
3LOGOLOGOG***, G***, G***
2100pCapacitor_SMD:C_0402_1005MetricC4, C15
23n9Inductor_SMD:L_0402_1005MetricL1, L2
2470Resistor_SMD:R_0402_1005MetricR4, R5
2LEDLED_SMD:LED_0402_1005MetricD1, D2
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
11kResistor_SMD:R_0402_1005MetricR3
11nCapacitor_SMD:C_0402_1005MetricC14
11pCapacitor_SMD:C_0402_1005MetricC6
11uCapacitor_SMD:C_0402_1005MetricC7
12450AT18A100ERF_Antenna:Johanson_2450AT18x100AE1
12u2Capacitor_SMD:C_0603_1608MetricC3
132.768kHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1BuzzerBuzzer_Beeper:PUIAudio_SMT_0825_S_4_RBZ1
1CR2032_HOLDERLibrary:MY-2032-01BT1
1G***kibuzzard-6367CE4Akibuzzard-6367CE4A
1G***kibuzzard-6367CCCAkibuzzard-6367CCCA
1G***kibuzzard-6367CDC3kibuzzard-6367CDC3
1G***kibuzzard-6367CCABkibuzzard-6367CCAB
1G***kibuzzard-6367CCB8kibuzzard-6367CCB8
1G***kibuzzard-6367CCBFkibuzzard-6367CCBF
1G***kibuzzard-6367D1E2kibuzzard-6367D1E2
1G***kibuzzard-6367D1D3kibuzzard-6367D1D3
1KXTJ3-1057Package_LGA:Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4yU1
1MountingHole_PadMountingHole:MountingHole_2.2mm_M2H1
1Q_NPN_BECPackage_TO_SOT_SMD:SOT-323_SC-70Q1
1SWDConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ1
1nRF52832-QFxxPackage_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mmU2

Similar boards

  • 4 layers150 × 101 mmLinear actuator, the printed circuit board in 3D

    Linear actuator

    kingoflolz/linear-actuator-hardware

    A fully integrated PCB linear actuator, with the motor driver, encoder and motor all on a single PCB. All designs are open source:

    204 parts73
  • 2 layers190 × 75 mmAVT2022 Badge Final, the printed circuit board in 3D

    AVT2022 Badge Final

    epremeaux/AVTokyo_2022_Badge

    AVTokyo 2022 event badge PCB, firmware and server code.

    72 parts9
  • 4 layersSim7070, the printed circuit board in 3D

    Sim7070

    onomondo/getting-started

    Onomondo Getting Started development kit. Board design files and firmware.

    96 parts7
  • 2 layers31.3 × 21.3 mmEsp32 i2c, the printed circuit board in 3D

    Esp32 i2c

    usnistgov/UAS-6.0-First-Responder-UAS-Wireless-Data-Gatherer-Challenge

    UAS 6.0 First Responder UAS Wireless Data Gatherer Challenge

    32 parts2
  • 2 layers73 × 77.5 mmUca dkaiot2-kicad, the printed circuit board in 3D

    Uca dkaiot2-kicad

    LEAT-EDGE/ambient-pcb-dkaiot

    The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…

    184 partsCERN-OHL-P-2.0
  • 4 layers54 × 54 mmPuchi pix card, the printed circuit board in 3D

    Puchi pix card

    yacchin1205/puchi-pix

    A tiny pixel art display kit powered by STM32G030F6P, with a 96x64 OLED (SSD1331) or TFT display.

    371 parts
  • 2 layers55.8 × 66.5 mmTadpoleswadge, the printed circuit board in 3D

    Tadpoleswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    86 parts114
  • 2 layers92.7 × 30 mmSenseEle PCB Antenna rev2, the printed circuit board in 3D

    SenseEle PCB Antenna rev2

    Appiko/sense_snap_hw

    This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.

    60 parts2

Questions

What parts does the CockTag use?

46 parts, built around the KXTJ3-1057 and 2450AT18A100E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CockTag KiCad files?

From the FireBite/cockTag-hw repository on GitHub, at the commit this page was made from: the board is cockTag.kicad_pcb and its schematic MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CockTag design in my own project?

Its repository states no licence, so its author keeps all rights: ask FireBite before reusing the design.