

RT12e ELE ACC-00
- Size
- 31 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 24
- Pads
- 122
- Tracks, vias
- 200, 95
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2022
- Updated
- 18 Mar 2023
Overview
RT12e ELE ACC-00 is an open-source printed circuit board by kharezga, from the kharezga/PCB repository on GitHub. It is a 2-layer board of 31 × 20 mm with 33 parts on 24 nets, routed with 200 tracks and 95 vias.
It is built around the SN65HVD230D, IAM-20680 and NUP2105L. Its parts include 13 capacitors, 6 resistors, 4 ICs, 4 diodes and 3 inductors. It belongs with the STM32 boards of this library.
Main components
3SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversIAM-20680
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 6uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-16(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
RT12e_ACC/RT12e_ELE_ACC-00/README.mdRT12e_ELE_ACC_00
Projekt w kiCad'ie 5.1.8 Całość jest takze w pdf'ie w docs.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C6, C7, C8, C9, C11, C13 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | L | Inductor_SMD:L_0805_2012Metric | L1, L2, L3 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C12 |
| 2 | D | Capacitor_SMD:C_0603_1608Metric | D2, D3 |
| 1 | 0.47uF | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 5V_CAN | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | IAM-20680 | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U3 |
| 1 | LM1085-3.3 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | STM32F042K6Tx | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SWD | Connector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_Vertical | J2 |
| 1 | Val** | LOGO:PWR_logo_11x2,5 | Ref** |
More from kharezga/PCB
2- 2 layers68.6 × 50.8 mm

- 2 layers52.6 × 35.6 mm

Similar boards
- 4 layers85 × 85 mm

- 4 layers110 × 80 mm

PNP MOBO V2
GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique
126 parts5MIT - 2 layers

GCAN gauge
willemcvu/gCAN-gauge
An open-source ESP32-based programmable digital gauge targeted at EV conversions
49 parts4MIT - 2 layers100 × 80 mm

Meganecan gw
Barbedx/MeganeCAN
ESP32-based CAN-bus companion for Renault Megane 2 infotainment displays.
68 parts3 - 2 layers68 × 92 mm

JoeM BMC V3.2
JoeMudr/JoeMBMC
This project is derived from Toms SimpBMS code. It started as a clone (Software & Hardware) but ended up completely rewritten and redesigned. But you might still find some traces to the original code.
70 parts2MIT - 4 layers71.2 × 66.1 mm

Maxbox
ios-cv/maxbox
An in car telemetry and access management box consisting of PCB design, firmware and case.
110 parts1AGPL-3.0 - 2 layers74 × 32 mm

- 2 layers139.9 × 85.8 mm

Pas hw
NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release
198 parts1
Questions
How big is the RT12e ELE ACC-00 PCB?
It measures 31 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RT12e ELE ACC-00 use?
33 parts, built around the SN65HVD230D, IAM-20680 and NUP2105L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RT12e ELE ACC-00 KiCad files?
From the kharezga/PCB repository on GitHub, at the commit this page was made from: the board is RT12e_ACC/RT12e_ELE_ACC-00/RT12e_ELE_ACC-00.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RT12e ELE ACC-00 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kharezga before reusing the design.