
PNP MOBO V1
GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique

pick and place de PCB pour projet S4 de robotique
PNP MOBO V2 is an open-source printed circuit board by GabrielD98, from the GabrielD98/PickUS_and_PlacUS repository on GitHub, published under the MIT licence. It is a 4-layer board of 110 × 80 mm with 126 parts on 123 nets, routed with 592 tracks and 56 vias.
It is built around the ESP32-S3-WROOM-1-N8, SN65HVD230D and AMS1117-3.3, with the IRLML6244, NUP2105L and SP0503BAHTG among its other parts. Its parts include 49 resistors, 23 capacitors, 18 connectors, 8 diodes and 3 ICs. It belongs with the ESP32 boards of this library.
A 4-axis (X, Y, Z, Yaw) PCB pick-and-place machine for automated SMD component assembly. Built for the S4 robotics project at Université de Sherbrooke.
Manual SMD component placement onto PCBs is time-consuming and error-prone. Small labs and educational institutions need an affordable pick-and-place machine for fast prototyping.
PickUS and PlacUS is an open-source, 4-axis automated pick-and-place machine that:
Ideal for robotics project teams, PCB assembly labs, and makers who need to automate component placement without high capital investment.
.pos placement files for batch production| Component | Technology |
|---|---|
| Microcontroller | ESP32-S3 (32-bit, dual-core, 240 MHz) |
| Motor Control | Stepper drivers (NEMA-17 steppers on X,Y,Z and NEMA_8 on YAW) |
| Firmware | C++ with PlatformIO / Arduino framework |
| Motor Library | AccelStepper |
| Communication | UART (serial) at 115200 baud |
| HMI | Python 3 + PyQt5/PySimpleGUI |
| Serial Library | pyserial |
| PCB Design | KiCad 8+ |
| Schematic | circuitPNP/ main board + PCB_test/ test board |
PickUS_and_PlacUS/
├── Electrical/ # KiCad schematics and PCB layouts
│ ├── PNP_MOBO_V1/ # Main control board
│ ├── PNP_TEST_CIRCUIT_V1/ # Test board for validation
│ └── README.md # Electrical recreation guide
├── Firmware_esp32/ # ESP32-S3 firmware (PlatformIO)
│ ├── src/ # C++ source files
│ ├── lib/ # Libraries (AccelStepper, etc.)
│ ├── test/ # Unit tests
│ ├── include/ # Header files
│ └── platformio.ini # PlatformIO config
└── HMI/ # Python host interface
├── src/ # Main HMI modules
│ ├── gui/ # GUI components
│ ├── communication.py # Serial protocol
│ ├── controller.py # Command orchestration
│ ├── main.py # Entry point
│ └── ...
└── tests/ # Unit and integration testsEach subsystem has its own detailed README:
| Subsystem | Technology | Purpose |
|---|---|---|
| Firmware_esp32 | C++ with PlatformIO | Real-time motor control, sensor reading, and command execution |
| HMI | Python 3 + PyQt5 | Cross-platform UI for machine operation and KiCad file import |
| Electrical | KiCad 8+ | Circuit design and PCB layouts |
This project uses a split-license model:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0 | Resistor_SMD:R_0402_1005Metric | R48, R49, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59, R62, R63, R64, R67 +2 |
| 14 | 10k 1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R40, R41, R42, R43, R44, R45, R46, R47, R60, R61, R65, R66 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C22, C24, C26, C28, C30, C32 |
| 7 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C20, C23, C25, C27, C29, C31, C33 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP4, TP5, TP6, TP7, TP8 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R8, R9, R11, R13, R16 |
| 6 | Conn_01x02_Pin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3, J5, J7, J17, J18, J19 |
| 6 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9, J10, J11, J12, J13, J14 |
| 6 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A5, A6, A7, A8, A9, A10 |
| 5 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8, C9, C13, C17 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R17 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C12, C16 |
| 3 | D | Diode_SMD:D_SMB | D2, D8, D9 |
| 3 | IRLML6244 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36, R37 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | REF1, REF2 |
| 2 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J15, J16 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D5, D6 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx38 | SW1, SW2 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 1uf/16V 10% | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J8 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J6 |
| 1 | D_TVS | Diode_SMD:D_SMB | D1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D7 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique

GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique

NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release

Akinlatauto19/STM32-Automotive-BCM-Development-Board
Automotive Body Control Module (BCM) development board designed around an STM32 microcontroller, featuring relay-based automotive outputs, power management, protection circuitry, and a custom KiCad PCB.

embedded-pro/e-foc-hardware
hardware to be used with https://github.com/embedded-pro/e-foc

Manushree-J/ESP32-Development-Board-PCB
Custom ESP32 development board designed in KiCad, featuring USB, OLED, CAN, UART, SPI, I2C, and power-management interfaces

mohamed-belal-10/can-motor-controller-node
CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB

Prap04/STM32_POWER_CONTROLLER_BOARD_DESIGN-
This project involves the design and development of a custom STM32F103C8T6-based embedded control board integrating power management, sensor interfaces, and industrial communication protocols.


klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
It measures 110 × 80 mm and has 4 copper layers, 1.6 mm thick.
126 parts, built around the ESP32-S3-WROOM-1-N8, SN65HVD230D, AMS1117-3.3 and IRLML6244. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GabrielD98/PickUS_and_PlacUS repository on GitHub, at the commit this page was made from: the board is Electrical/PNP_MOBO_V2/PNP_MOBO_V2.kicad_pcb and its schematic Electrical/PNP_MOBO_V1/PNP_MOBO_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).