2 layers45 × 35 mm
2 layers48.9 × 26.7 mm
TrueBypassRelayModule
kanengomibako/Modules4- Size
- 48.9 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 22
- Pads
- 105
- Tracks, vias
- 158, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Jul 2025
- Updated
- 11 May 2026
Overview
TrueBypassRelayModule is an open-source printed circuit board by kanengomibako, from the kanengomibako/Modules repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 48.9 × 26.7 mm with 57 parts on 22 nets, routed with 158 tracks and 2 vias.
It is built around the 78L05, TC4069UBP and 2SC1815-GR. Its parts include 8 capacitors, 7 resistors, 6 connectors, 4 diodes and 3 ICs.
Main components
3
78L05
SOT-89-3-20℃~+120℃@(Tj) 1 1.7V 100mA 2mA 30V 40uV 49dB@(120Hz) 5V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TC4069UBP
DIP-14DIP-14 Inverters ROHSToshibaInverters
2SC1815-GR
TO-92Bipolar (BJT)YFW
README
10VBlocker/README.md10V Blocker
10V以上の電圧が入力されると、電源供給を遮断するモジュールです。
配線方法
- IN → 電源入力 +
- 上側中央のパッド → 電源入出力 -（グラウンド）
- OUT → 電源出力 +
基板下側のパッドはどこにも接続されていません。マル信無線電機 DCジャック MJ-40Aに直付けする場合、電池の接続が可能です。
注意事項
- 新品の電池は電圧が10V以上の場合があり、本モジュールにより電源が遮断される可能性があります。
- 電源の遮断が不十分となる場合があるため、消費電流0.1mA未満の機器には使用しないでください。
資料
| 主な仕様 | |
|---|---|
| 最大入力電圧 | 30V |
| 遮断電圧 | 10.0V ～ 10.3V |
| 直列抵抗 | 0.04Ω |
| 消費電流 | 0.7mA |
| 最大出力電流 | 1A |
| 必要出力電流 | 0.1mA以上 |
| 外形寸法 | 幅 12 mm × 奥行 10 mm × 高さ 2.5 mm |
| 質量 | 約 0.4 g |
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | M | myFoot:MountingHole_1.0mm | R, R, R, R, R, R, R, R, R, R, R, R, R, R, R, R +4 |
| 7 | 100n | myFoot:my_C_Disc_P2.50mm | C1, C2, C3, C4, C5, C6, C7 |
| 6 | M | MountingHole:MountingHole_3.2mm_M3 | R, R, R, R, R, R |
| 3 | 100k | myFoot:my_R_P7.62mm_Horizontal | R1, R4, R5 |
| 3 | 1N4148 | myFoot:my_D_P5.08mm_Horizontal | D1, D2, D3 |
| 2 | 10k | myFoot:my_R_P7.62mm_Horizontal | R6, R7 |
| 2 | 2SC1815-GR | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 10u | myFoot:my_C_D5.0mm_P2.50mm | C8 |
| 1 | 1M | myFoot:my_R_P7.62mm_Horizontal | R2 |
| 1 | 1k | myFoot:my_R_P7.62mm_Horizontal | R3 |
| 1 | 78L05 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | EA2-5TNAG | myFoot:EA2-5TNAG | U1 |
| 1 | FS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | GND | myFoot:my_WirePad_0-8mmDrill | J8 |
| 1 | IN | myFoot:my_WirePad_0-8mmDrill | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D4 |
| 1 | OUT | myFoot:my_WirePad_0-8mmDrill | J4 |
| 1 | RTN | myFoot:my_WirePad_0-8mmDrill | J3 |
| 1 | SND | myFoot:my_WirePad_0-8mmDrill | J2 |
| 1 | TC4069UBP | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | VCC | myFoot:my_WirePad_0-8mmDrill | J6 |
Questions
How big is the TrueBypassRelayModule PCB?
It measures 48.9 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TrueBypassRelayModule use?
57 parts, built around the 78L05, TC4069UBP and 2SC1815-GR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TrueBypassRelayModule KiCad files?
From the kanengomibako/Modules repository on GitHub, at the commit this page was made from: the board is TrueBypassRelayModuleTHD/old/TrueBypassRelayModule.kicad_pcb and its schematic 10VBlocker/10VBlocker_RevB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TrueBypassRelayModule design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from kanengomibako/Modules
7- 2 layers35 × 24.5 mm
- 4 layers24.5 × 24.5 mm
- 4 layers10.1 × 20.3 mm
- 2 layers17.9 × 15 mm
- 2 layers25.5 × 11 mm
- 2 layers12 × 9.5 mm
Similar boards
- 2 layers54 × 47 mm
- 2 layers100 × 100 mm
Linetracer2
KAIT-EDTC/Linetracer2
子ども向け教材ライントレーサー（Raspberry Pi Pico + TC78H653FTG + 130モーター、全部スルーホール・ねじ止め・3Dプリント）
52 parts - 2 layers95.3 × 58.4 mm
- 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 2 layers51.8 × 32.6 mm
C64-rf modulator replacement
mbarszcz-pcb/c64-rf-modulator-replacement
C64 Composite/S-Video RF Modulator Replacement
33 parts86MIT - 2 layers86.4 × 69.9 mm
- 2 layers106 × 95.4 mm
- 2 layers41.1 × 110.7 mm
