Skip to the content
2 layers12 × 9.5 mm10VBlocker RevB, the printed circuit board in 3D

10VBlocker RevB

kanengomibako/Modules4
Size
12 × 9.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
8
Pads
27
Tracks, vias
42, 4
Pours
29
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Jul 2025
Updated
11 May 2026

Overview

10VBlocker RevB is an open-source printed circuit board by kanengomibako, from the kanengomibako/Modules repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 12 × 9.5 mm with 9 parts on 8 nets, routed with 42 tracks and 4 vias.

It is built around the MX25947ES, CC0603KRX7R9BB104 and 0603WAF2003, with the 0603WAF2202, 0603WAF3302 and SM4007PL among its other parts. Its parts include 3 resistors, 2 connectors, 1 capacitor, 1 IC and 1 diode.

Main components

6

README

10VBlocker/README.md

10V Blocker


10V以上の電圧が入力されると、電源供給を遮断するモジュールです。

配線方法

  • IN → 電源入力 +
  • 上側中央のパッド → 電源入出力 -(グラウンド)
  • OUT → 電源出力 +

基板下側のパッドはどこにも接続されていません。マル信無線電機 DCジャック MJ-40Aに直付けする場合、電池の接続が可能です。

注意事項

  • 新品の電池は電圧が10V以上の場合があり、本モジュールにより電源が遮断される可能性があります。
  • 電源の遮断が不十分となる場合があるため、消費電流0.1mA未満の機器には使用しないでください。

資料

主な仕様
最大入力電圧30V
遮断電圧10.0V ~ 10.3V
直列抵抗0.04Ω
消費電流0.7mA
最大出力電流1A
必要出力電流0.1mA以上
外形寸法幅 12 mm × 奥行 10 mm × 高さ 2.5 mm
質量約 0.4 g

Parts

9
QtyValueFootprintReferences
1100nCapacitor_SMD:C_0603_1608MetricC101
1200kResistor_SMD:R_0603_1608MetricR101
122kResistor_SMD:R_0603_1608MetricR102
133kResistor_SMD:R_0603_1608MetricR103
1DC_INmyFoot:MJ-40AJ101
1LOGOmyFoot:kanen_logoG***
1MX25947ESPackage_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mmU101
1OUTConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ102
1SM4007Diode_SMD:D_SOD-123FD101

More from kanengomibako/Modules

7

Similar boards

  • 4 layers80 × 50.5 mmLoeti, the printed circuit board in 3D

    Loeti

    elagil/loeti

    Soldering equipment for JBC irons

    110 parts5
  • 2 layers50 × 75 mmDIGITAL, the printed circuit board in 3D

    DIGITAL

    kaminaris/GigaESC

    55 parts47
  • 8 layers120 × 100 mmGeeks ecu, the printed circuit board in 3D

    Geeks ecu

    synthesissolutions/geeksforkids

    458 parts2
  • 2 layers130 × 164 mmCct main, the printed circuit board in 3D

    Cct main

    syncmeta/PendingHome

    全屋双色温灯光控制方案 基于 HA 和 ESPHome

    217 partsMIT
  • 4 layers63.6 × 86 mmBECom, the printed circuit board in 3D

    BECom

    rjsc/BECom

    BECom - Battery Emulator Companion - Open Source Hardware, designed to run dalathegreat/Battery-Emulator

    276 parts2GPL-3.0
  • 4 layers54 × 106 mmSeed pedal, the printed circuit board in 3D

    Seed pedal

    TMANTsmith/daisy-esp32-guitar-pedal

    esp23 + daisy guitar pedal

    77 parts1

Questions

How big is the 10VBlocker RevB PCB?

It measures 12 × 9.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 10VBlocker RevB use?

9 parts, built around the MX25947ES, CC0603KRX7R9BB104, 0603WAF2003 and 0603WAF2202. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 10VBlocker RevB KiCad files?

From the kanengomibako/Modules repository on GitHub, at the commit this page was made from: the board is 10VBlocker/10VBlocker_RevB.kicad_pcb and its schematic 10VBlocker/10VBlocker_RevB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 10VBlocker RevB design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).