

Mixers
WIP! Don't try repeating!
- Size
- 90 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 133
- Nets
- 94
- Pads
- 392
- Tracks, vias
- 428, 71
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jan 2024
- Updated
- 7 Jan 2024
Overview
Mixers is an open-source printed circuit board by k1zmt, from the k1zmt/SSB85MultiPCB repository on GitHub. It is a 2-layer board of 90 × 60 mm with 133 parts on 94 nets, routed with 428 tracks and 71 vias.
It is built around the LM358, LM386 and BF998R, with the L7805, LM393 and BS170FTA among its other parts. Its parts include 73 capacitors, 12 resistors, 12 inductors, 10 crystals and 8 ICs. It belongs with the radio and wireless and audio and music boards of this library.
Main components
11LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierLM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmpsBF998R
SOT-143RSOT-143R New Arrivals ROHSNXP SemiconductorsUncategorisedL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparatorsBS170FTA
SOT-23-55℃~+150℃ 1 N-channel 2.8Ω@10V 250mA 25pF 2V 2pF 300mW 400pC@4.5V 5pF 60V SOT-23 MOSFETs ROHSUMWMOSFETs1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesG6K-2F-RF DC5
SMD-40℃~+70℃ 100mW 100mΩ 1A 237Ω 300mA@125VAC、1A@30VDC 3ms 3ms 5V 60V@DC、125V@AC Two groups of conversions: 2C(Double-pole double-throw conversion) SMD Signal Relays ROHSOmronSignal RelaysIRF7324
SOP-8-150milUncategorisedInfineon TechnologiesMBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesS9014
SOT-23-55℃~+150℃ 1 NPN 100mA 100nA 150MHz 200 200mW 300mV 45V 5V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdParts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 104 | Capacitor_SMD:C_0805_2012Metric | C1, C17, C18, C19, C23, C24, C25, C28, C30, C35, C36, C38, C45, C50, C51, C54 +12 |
| 10 | 103 | Capacitor_SMD:C_0805_2012Metric | C2, C3, C22, C26, C27, R1, R16, R24, R27, R31 |
| 10 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9, Y10 |
| 8 | 106 | Capacitor_SMD:C_0805_2012Metric | C21, C31, C39, C40, C43, C46, C47, C52 |
| 7 | 105 | Capacitor_SMD:C_0805_2012Metric | C4, C5, C29, C37, C41, R11, R14 |
| 7 | 330 | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C13, C14, C15, C16 |
| 5 | 104 | Inductor_SMD:L_0805_2012Metric | L2, L3, L4, L7, L8 |
| 4 | 102 | Capacitor_SMD:C_0805_2012Metric | C53, R10, R12, R21 |
| 3 | 472 | Capacitor_SMD:C_0805_2012Metric | R22, R29, R30 |
| 2 | 0 | Capacitor_SMD:C_0805_2012Metric | R6, R7 |
| 2 | 101 | Capacitor_SMD:C_0805_2012Metric | C6, C20 |
| 2 | 151 | Capacitor_SMD:C_0805_2012Metric | C32, C34 |
| 2 | 18T+13T | PhilsFootprintLibrary:L_Coilcraft_Slot7_15 | L10, L11 |
| 2 | 224 | Capacitor_SMD:C_0805_2012Metric | R2, R8 |
| 2 | 4T:31T | PhilsFootprintLibrary:Balun_BN-43-2402_SMD | L1, L9 |
| 2 | 503 | Potentiometer_SMD:Potentiometer_Bourns_3224W_Vertical | RV1, RV2 |
| 2 | 9T+9T:7T | PhilsFootprintLibrary:L_Coilcraft_Slot7_15 | L5, L6 |
| 2 | BS170F | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | SA612 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 221 | Capacitor_SMD:C_0805_2012Metric | R5 |
| 1 | 222 | Capacitor_SMD:C_0805_2012Metric | C42 |
| 1 | 227 | Capacitor_SMD:CP_Elec_6.3x3 | C49 |
| 1 | 227 | Capacitor_SMD:CP_Elec_10x12.6 | C44 |
| 1 | 270 | Capacitor_SMD:C_0805_2012Metric | C33 |
| 1 | 470 | Capacitor_SMD:C_0805_2012Metric | R28 |
| 1 | 471 | Capacitor_SMD:C_0805_2012Metric | R4 |
| 1 | 473 | Capacitor_SMD:C_0805_2012Metric | C48 |
| 1 | 47R | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 684 | Capacitor_SMD:C_0805_2012Metric | R15 |
| 1 | AudioJack3_Ground_SwitchTR | PhilsFootprintLibrary:Jack_3.5mm_PJ342_Horizontal2 | J5 |
| 1 | BF998R | Package_TO_SOT_SMD:SOT-143R | U2 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | G6K-2F-RF | PhilsFootprintLibrary:Relay_DPDT_Omron_G6K-2F-RF | K1 |
| 1 | IRF7324 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U7 |
| 1 | L7808 | Package_TO_SOT_SMD:TO-252-2 | U5 |
| 1 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LM386 | Package_SO:PowerIntegrations_SO-8 | U8 |
| 1 | LM393 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | L_Ferrite | Inductor_SMD:L_Taiyo-Yuden_NR-10050_9.8x10.0mm | L12 |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D2 |
| 1 | RX GREEN | Diode_SMD:D_1206_3216Metric | D4 |
| 1 | RX_IN | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1 |
| 1 | R_Potentiometer_Switch | PhilsFootprintLibrary:Potentiometer_Switch | RV3 |
| 1 | S9014 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TX RED | Diode_SMD:D_1206_3216Metric | D3 |
| 1 | TX_OUT | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J2 |
| 1 | VFO1 | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J3 |
| 1 | VFO2 | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J4 |
More from k1zmt/SSB85MultiPCB
12- 2 layers175.1 × 120 mm

- 2 layers100 × 60 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers40 × 35 mm

- 2 layers100 × 55 mm

- 2 layers72 × 20 mm

- 2 layers35 × 14 mm

- 2 layers36 × 35 mm

Similar boards
- 4 layers80 × 80 mm

- 2 layers171 × 83.9 mm

- 2 layers99.5 × 90.5 mm

- 2 layers102 × 102 mm

- 2 layers75 × 93 mm

- 2 layers121.2 × 63.4 mm

- 10 layers470 × 346.5 mm

- 2 layers149.3 × 87.9 mm

Questions
How big is the Mixers PCB?
It measures 90 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mixers use?
133 parts, built around the LM358, LM386, BF998R and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixers KiCad files?
From the k1zmt/SSB85MultiPCB repository on GitHub, at the commit this page was made from: the board is Mixers/Mixers.kicad_pcb and its schematic AD831HotBoard/AD831HotBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixers design in my own project?
Its repository states no licence, so its author keeps all rights: ask k1zmt before reusing the design.
