2 layers90 × 60 mm
2 layers175.1 × 120 mm
HiPowerLPF
k1zmt/SSB85MultiPCB1WIP! Don't try repeating!
- Size
- 175.1 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 70
- Pads
- 370
- Tracks, vias
- 119, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jan 2024
- Updated
- 7 Jan 2024
Overview
HiPowerLPF is an open-source printed circuit board by k1zmt, from the k1zmt/SSB85MultiPCB repository on GitHub. It is a 2-layer board of 175.1 × 120 mm with 128 parts on 70 nets, routed with 119 tracks and 42 vias.
It is built around the AO3400A, 1N4148W and BSS138. Its parts include 66 capacitors, 15 inductors, 12 resistors, 11 switches and 8 connectors. It belongs with the radio and wireless boards of this library.
Main components
3
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdSSB85MultiPCB
Watch it in the work here
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 470p | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C6, C16, C27, C28, C29, C41, C42, C43, C45, C46, C47 |
| 11 | QJC2 | PhilsFootprintLibrary:Relay_QJC2 | K1, K2, K3, K4, K5, K6, K7, K8, K9, K10, K11 |
| 10 | 47p | Capacitor_SMD:C_1206_3216Metric | C10, C50, C57, C58, C60, C61, C62, C63, C65, C66 |
| 10 | 680p | Capacitor_SMD:C_1206_3216Metric | C17, C19, C33, C34, C35, C36, C37, C38, C39, C40 |
| 6 | 104 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C12, C13, C14, C15 |
| 6 | 220p | Capacitor_SMD:C_1206_3216Metric | C7, C9, C49, C51, C52, C54 |
| 6 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | 101 | Resistor_SMD:R_1812_4532Metric | R2, R3, R8, R9 |
| 4 | 102 | Resistor_SMD:R_0805_2012Metric | R5, R6, R10, R12 |
| 4 | 330p | Capacitor_SMD:C_1206_3216Metric | C8, C53, C55, C56 |
| 4 | 470 | Capacitor_SMD:C_1206_3216Metric | C18, C30, C31, C32 |
| 4 | 5.6uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L5, L6, L10, L12 |
| 4 | 68p | Capacitor_SMD:C_1206_3216Metric | C24, C25, C26, C59 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 1.5uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L4, L9 |
| 2 | 100p | Capacitor_SMD:C_1206_3216Metric | C44, C48 |
| 2 | 182 | Capacitor_SMD:C_1206_3216Metric | C11, C22 |
| 2 | 2.7uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L1, L3 |
| 2 | 223 | Resistor_SMD:R_0805_2012Metric | R4, R7 |
| 2 | 332 | Capacitor_SMD:C_1206_3216Metric | C20, C21 |
| 2 | 33p | Capacitor_SMD:C_1206_3216Metric | C23, C64 |
| 2 | 390nH | PhilsFootprintLibrary:L_AirCore_L15_P15mm | L13, L15 |
| 2 | 6.2uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L7, L11 |
| 2 | D | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | +12V | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J8 |
| 1 | +5V | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | +5V_TX | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | 1.6uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L8 |
| 1 | 103 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 104 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1T:20T, BN-43-202 | PhilsFootprintLibrary:Balun_5PIN_BN-43-202_SMD_SWR_Bridge | U3 |
| 1 | 3.3uH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L2 |
| 1 | 430nH | PhilsFootprintLibrary:L_AirCore_L15_P15mm | L14 |
| 1 | ANTENNA | PhilsFootprintLibrary:Connector_SO239 | J6 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x03_MountingPin | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J5 |
| 1 | MCP23017_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | RX_BPF | Connector_Coaxial:SMA_Amphenol_132291_Vertical | J7 |
| 1 | SPI | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J2 |
| 1 | TX_AMP_IN | Connector_Wire:SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm | J4 |
More from k1zmt/SSB85MultiPCB
12- 2 layers100 × 60 mm
- 2 layers100 × 55 mm
- 2 layers100 × 55 mm
- 2 layers100 × 55 mm
- 2 layers100 × 55 mm
- 2 layers100 × 55 mm
- 2 layers40 × 35 mm
- 2 layers100 × 55 mm
- 2 layers72 × 20 mm
- 2 layers35 × 14 mm
- 2 layers36 × 35 mm
Similar boards
- 2 layers36 × 38 mm
- 4 layers
Rocket fc
npsggehlot-cmyk/self-landing-rocket
Self-landing TVC model rocket: RocketFC flight computer PCB, avionics bay, servo chute ejector, Arduino firmware, 3D MATLAB flight simulator
104 parts - 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers90.1 × 135 mm
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers164 × 100 mm
- 2 layers289.7 × 109.1 mm
Wlfkbd
WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.
214 parts19MIT - 2 layers68 × 46 mm
Ardor IO
balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.
81 parts18MIT
Questions
How big is the HiPowerLPF PCB?
It measures 175.1 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HiPowerLPF use?
128 parts, built around the AO3400A, 1N4148W and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HiPowerLPF KiCad files?
From the k1zmt/SSB85MultiPCB repository on GitHub, at the commit this page was made from: the board is HiPowerLPF/HiPowerLPF.kicad_pcb and its schematic AD831HotBoard/AD831HotBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HiPowerLPF design in my own project?
Its repository states no licence, so its author keeps all rights: ask k1zmt before reusing the design.