

PA LPF
WIP! Don't try repeating!
- Size
- 100 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 51
- Pads
- 194
- Tracks, vias
- 179, 103
- Pours
- 87
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Jan 2024
- Updated
- 7 Jan 2024
Overview
PA LPF is an open-source printed circuit board by k1zmt, from the k1zmt/SSB85MultiPCB repository on GitHub. It is a 2-layer board of 100 × 55 mm with 51 parts on 51 nets, routed with 179 tracks and 103 vias.
It is built around the DRV8833RTYR, HFD4/4.5-LSR and 1N4148W, with the BSS138 and HFD4/4.5-S among its other parts. Its parts include 15 capacitors, 11 resistors, 7 connectors, 4 inductors and 3 ICs. It belongs with the radio and wireless boards of this library.
Main components
5DRV8833RTYR
QFN-16-EP(4x4)-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Yes QFN-16-EP(4x4) Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverHFD4/4.5-LSR
SMD,10x6.5mm-40℃~+85℃ 100mW 100mΩ 203Ω 220V@DC、250V@AC 2A 300mA@125VAC、1A@30VDC 3ms 3ms 4.5V AgNi + Gold plated Polarized-Single Coil SMD,10x6.5mm Signal Relays ROHSHFMagnetic Latching Relays1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsHFD4/4.5-S
SMD-8P,10x6.5mm10mm 6.5mm SMD-8P,10x6.5mm Signal Relays ROHSHFSignal Relays
README
README.mdParts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 104 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C7, C11, C14, C17 |
| 4 | 101 | Resistor_SMD:R_1812_4532Metric | R1, R2, R8, R9 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 102 | Resistor_SMD:R_0805_2012Metric | R4, R6, R11 |
| 2 | 100p | Capacitor_SMD:C_1206_3216Metric | C18, C20 |
| 2 | 102 | Capacitor_SMD:C_1206_3216Metric | C12, C15 |
| 2 | 223 | Resistor_SMD:R_0805_2012Metric | R3, R7 |
| 2 | D | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | HFD4-4/5-LS | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K1, K2 |
| 1 | +5V | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J5 |
| 1 | +5V_TX | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | 103 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 104 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 106 | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 152 | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D3 |
| 1 | 1T:20T, BN-43-202 | PhilsFootprintLibrary:Balun_5PIN_BN-43-202_SMD_SWR_Bridge | U3 |
| 1 | 2.2uH | PhilsFootprintLibrary:L_T50_L13_W8_P5mm | L2 |
| 1 | 220p | Capacitor_SMD:C_1206_3216Metric | C19 |
| 1 | 330n, 6t on 10mm | PhilsFootprintLibrary:L_T50_L13_W8_P5mm | L5 |
| 1 | 330nHn | PhilsFootprintLibrary:L_T50_L13_W8_P5mm | L4 |
| 1 | ANTENNA | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x03_MountingPin | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J7 |
| 1 | DRV8833RTY | Package_DFN_QFN:Texas_S-PWQFN-N16_EP2.1x2.1mm_ThermalVias | U2 |
| 1 | HFD4-4/5 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K3 |
| 1 | MCP23017_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | RX_BPF | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J4 |
| 1 | SPI | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J1 |
| 1 | T50-2, 21t | PhilsFootprintLibrary:L_T50_L13_W8_P5mm | L3 |
| 1 | TX_AMP_IN | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J6 |
More from k1zmt/SSB85MultiPCB
12- 2 layers90 × 60 mm

- 2 layers175.1 × 120 mm

- 2 layers100 × 60 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers100 × 55 mm

- 2 layers40 × 35 mm

- 2 layers100 × 55 mm

- 2 layers72 × 20 mm

- 2 layers35 × 14 mm

- 2 layers36 × 35 mm

Similar boards
- 2 layers69 × 72 mm

MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0 - 4 layers45.8 × 30.4 mm

Battle bot pcb
MarkusVLA/robot-controller
150g combat robot controller PCB and firmware
66 parts3Apache-2.0 - 4 layers60 × 40 mm

RCcar
jeffreydthompson/Open_Roadster
Support files for course creating BLE remote controlled car from scratch.
95 parts1 - 2 layers80 × 117.3 mm

- 4 layers50 × 80 mm

Pami 2026
robotronik/cdfr2026_pamis
Les Pamis pour la coupe de france de robotique de 2026
147 parts1MIT - 4 layers22.9 × 62.2 mm

- 4 layers65.1 × 56 mm

- 4 layers40 × 40 mm

Questions
How big is the PA LPF PCB?
It measures 100 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PA LPF use?
51 parts, built around the DRV8833RTYR, HFD4/4.5-LSR, 1N4148W and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PA LPF KiCad files?
From the k1zmt/SSB85MultiPCB repository on GitHub, at the commit this page was made from: the board is PA_LPF/PA_LPF.kicad_pcb and its schematic AD831HotBoard/AD831HotBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PA LPF design in my own project?
Its repository states no licence, so its author keeps all rights: ask k1zmt before reusing the design.
