Skip to the content
10 layers470 × 346.5 mmAnalogFNN, the printed circuit board in 3D

AnalogFNN

hransom528/AnalogNNPCB

Analog Neural Network PCB for CPS Lab Research Project

Full screenGitHub.kicad_pcb
Size
470 × 346.5 mm
Copper layers
10
Thickness
1.6 mm
Parts
1,596
Nets
1,626
Pads
9,014
Tracks, vias
25,032, 3,181
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20220914)
Created
7 Dec 2024
Updated
20 Jun 2025

Overview

AnalogFNN is an open-source printed circuit board by hransom528, from the hransom528/AnalogNNPCB repository on GitHub. It is a 10-layer board of 470 × 346.5 mm with 1,596 parts on 1,626 nets, routed with 25,032 tracks and 3,181 vias.

It is built around the MCP41050-E/P, CD74HC4067SM96 and IRF7324. Its parts include 1,039 resistors, 328 ICs, 96 transistors, 80 capacitors and 48 diodes. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

AnalogNNPCB

Analog Neural Network PCB for CPS Lab Research Project

Parts

1,596
QtyValueFootprintReferences
8201kResistor_SMD:R_0201_0603MetricR1163, R1164, R1165, R1166, R1167, R1168, R1169, R1170, R1171, R1172, R1173, R1174, R130001, R130002, R130003, R130004 +804
192200kResistor_SMD:R_0201_0603MetricR130005, R130006, R132005, R132006, R133005, R133006, R134005, R134006, R135005, R135006, R136005, R136006, R138005, R138006, R140005, R140006 +176
192MCP41050Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU123, U124, U125, U126, U127, U128, U129, U130, U131, U132, U133, U134, U135, U136, U137, U138 +176
122TLV9004xRUCRPackage_DFN_QFN:Texas_S-PX2QFN-14U13001, U14001, U130001, U131001, U132001, U133001, U134001, U135001, U136001, U138001, U139001, U140001, U141001, U142001, U143001, U145001 +106
96IRF7324Package_SO:SOIC-8_3.9x4.9mm_P1.27mmQ14001, Q15001, Q130001, Q132001, Q133001, Q134001, Q135001, Q136001, Q138001, Q140001, Q141001, Q142001, Q143001, Q145001, Q147001, Q149001 +80
48DDiode_SMD:D_0201_0603MetricD13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D131001, D131002, D139001, D139002, D148001, D148002 +32
280.1uCapacitor_SMD:C_0201_0603MetricC21, C24, C27, C30, C33, C36, C39, C42, C3003, C13003, C17003, C23003, C33003, C131003, C139003, C148003 +12
27100kResistor_SMD:R_0201_0603MetricR173, R200, R227, R254, R281, R308, R335, R362, R3003, R13003, R17003, R23003, R33003, R131003, R139003, R148003 +11
264.7uCapacitor_SMD:C_0201_0603MetricC19, C22, C25, C28, C31, C34, C37, C40, C3001, C13001, C17001, C23001, C33001, C131001, C139001, C148001 +10
2647uCapacitor_SMD:C_0603_1608MetricC20, C23, C26, C29, C32, C35, C38, C41, C3002, C13002, C17002, C23002, C33002, C131002, C139002, C148002 +10
13CD74HC4067SMPackage_SO:SSOP-24_5.3x8.2mm_P0.65mmU303, U304, U305, U306, U307, U308, U309, U310, U311, U312, U313, U314, U315
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1Conn_01x12_MaleConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ3
1STM32F030CCTxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1SW_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1

More from hransom528/AnalogNNPCB

1
  • 10 layers530 × 395 mmOLD PCB, the printed circuit board in 3D

    OLD PCB

    hransom528/AnalogNNPCB

    Analog Neural Network PCB for CPS Lab Research Project

    1,552 parts

Similar boards

  • 2 layers90 × 60 mmMixers, the printed circuit board in 3D

    Mixers

    k1zmt/SSB85MultiPCB

    WIP! Don't try repeating!

    133 parts1
  • 2 layers75 × 93 mmHeadphone Amp 2, the printed circuit board in 3D

    Headphone Amp 2

    bengineer91/Headphone_Amp

    Basic opamp headphone amplifier

    111 parts
  • 2 layers149.3 × 87.9 mmDatapod, the printed circuit board in 3D

    Datapod

    pedrolpena/datapod

    Arduino based schematics and software for the AOML ABIIS system

    67 parts
  • 2 layers60 × 57.5 mmExpressionx3, the printed circuit board in 3D

    Expressionx3

    dbostian/expressyourself

    A DIY triple expression pedal. This pedal was heavily inspired by the Old Blood Noise Endeavors Expression Ramper x3. I wanted to add the ability for the pedal to modulate its own values.

    58 parts3
  • 2 layers85 × 65 mmFuente regulable, the printed circuit board in 3D

    Fuente regulable

    iowlabs/camara_electroforesis

    Dispositivo para la instrumentación de experimentos de electroforesis. Considera tanto el diseño de un modelo 3D para el tanque, como la electrónica para una fuente generadora de voltaje.

    80 parts1GPL-3.0
  • 2 layers68.6 × 53.3 mmProject kicad, the printed circuit board in 3D

    Project kicad

    MOSH-Insa-Toulouse/2023-2024_4GP_NGO-TRAN

    INSA 4GP MOSH Project - NGO/TRAN

    23 parts1MIT
  • 2 layers49.5 × 44.5 mmHv power supply, the printed circuit board in 3D

    Hv power supply

    wheeler-microfluidics/kicad___hv_power_supply

    Digitally adjustable high-voltage power supply

    19 parts1

Questions

How big is the AnalogFNN PCB?

It measures 470 × 346.5 mm and has 10 copper layers, 1.6 mm thick.

What parts does the AnalogFNN use?

1,596 parts, built around the MCP41050-E/P, CD74HC4067SM96 and IRF7324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AnalogFNN KiCad files?

From the hransom528/AnalogNNPCB repository on GitHub, at the commit this page was made from: the board is PCBDesign/AnalogFNN/AnalogFNN.kicad_pcb and its schematic PCBDesign/AnalogFNN/Adder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AnalogFNN design in my own project?

Its repository states no licence, so its author keeps all rights: ask hransom528 before reusing the design.