Skip to the content
2 layers64.5 × 92 mmFront, the printed circuit board in 3D

20A bipolar current source with water cooled sensing resistor

Size
64.5 × 92 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
37
Pads
158
Tracks, vias
312, 28
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
19 Apr 2023
Updated
20 Jul 2026

Overview

Front is an open-source printed circuit board by JQIamo, from the JQIamo/20A-bipolar-current-source repository on GitHub. It is a 2-layer board of 64.5 × 92 mm with 40 parts on 37 nets, routed with 312 tracks and 28 vias.

It is built around the TC7SZ125FU-TP, AD8421ARZ and MAX4656ESA+. Its parts include 12 capacitors, 9 resistors, 6 diodes, 6 connectors and 5 ICs.

Main components

3

README

README.md

20A-bipolar-current-source

20A bipolar current source with water cooled sensing resistor

Parts

40
QtyValueFootprintReferences
120.1uFCapacitors_SMD:C_0603C1, C2, C3, C4, C5, C6, C7, C8, C15, C16, C17, C18
4Conn_Coaxialzmyfootprint:BNC-VerticalJ1, J2, J4, J7
4Dzmyfootprint:Diode_SOD80D1, D2, D4, D5
350Resistors_SMD:R_0603R1, R2, R11
3AD8421Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1, U2, U4
2200Resistors_SMD:R_0805R20, R21
2LEDzmyfootprint:LEDD3, D6
2MAX4656Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mmS1, S2
2TC7SZ125FUzmyfootprint:TC7SZ125FUU3, U5
11MResistors_SMD:R_0603R3
11kResistors_SMD:R_0603R10
1200Resistors_SMD:R_0603R5
1Conn_02x07_Odd_Evenzmyfootprint:14PinConnJ5
1Conn_02x08_Odd_Evenzmyfootprint:16PinConnJ3
1DNPResistors_SMD:R_0805R4

More from JQIamo/20A-bipolar-current-source

1
  • 4 layers145 × 157 mmRear, the printed circuit board in 3D

    Rear

    JQIamo/20A-bipolar-current-source

    20A bipolar current source with water cooled sensing resistor

    99 parts2

Similar boards

  • 2 layers230.4 × 233.5 mmBkm-68x simple, the printed circuit board in 3D

    Bkm-68x simple

    skumlos/bkm-68x-simple

    Simplified BKM-68X

    216 parts7
  • 2 layers11.7 × 33.8 mmRGB strip controller, the printed circuit board in 3D

    RGB strip controller

    eritbh/esp01-led-controller

    Using the ESP-01 to control addressable RGB LED strips.

    24 partsCC0-1.0
  • 2 layers100 × 100 mmAmplifier, the printed circuit board in 3D

    Amplifier

    PatrickJohnDavies/Hydrophone

    107 parts8
  • 2 layers86 × 71 mmCurrent voltage input, the printed circuit board in 3D

    Current voltage input

    RWTH-ACS/current-voltage-input

    Input Stage for three phase voltage and current in the low voltage grid

    153 parts2CERN-OHL-W-2.0
  • 6 layers100.7 × 106.4 mmSignal processing unit, the printed circuit board in 3D

    Signal processing unit

    scalinq-lab/cryomagsens

    The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.

    178 parts2CERN-OHL-P-2.0
  • 4 layers147.2 × 96.3 mmShieldPCB, the printed circuit board in 3D

    ShieldPCB

    AErbsloeh/stimulation_genv3

    Hardware Design Files for Experimental Stimulation Platform (Gen 3)

    142 partsMIT
  • 4 layers108.5 × 107.7 mmPid, the printed circuit board in 3D

    Pid

    bec5-group/pid-controller

    Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…

    428 parts

Questions

How big is the Front PCB?

It measures 64.5 × 92 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Front use?

40 parts, built around the TC7SZ125FU-TP, AD8421ARZ and MAX4656ESA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Front KiCad files?

From the JQIamo/20A-bipolar-current-source repository on GitHub, at the commit this page was made from: the board is Kicad/front/front.kicad_pcb and its schematic Kicad/front/file5C76BF00.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Front design in my own project?

Its repository states no licence, so its author keeps all rights: ask JQIamo before reusing the design.