2 layers49.5 × 45 mm
2 layers49.5 × 45 mm
Hb rc-2-pbu led
jp112sdl/HB-RC-2-PBU-LED72 fach Wandtaster mit RGB LED Beleuchtung
- Size
- 49.5 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 36
- Pads
- 105
- Tracks, vias
- 209, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Aug 2019
- Updated
- 28 Aug 2024
Overview
Hb rc-2-pbu led is an open-source printed circuit board by jp112sdl, from the jp112sdl/HB-RC-2-PBU-LED repository on GitHub. It is a 2-layer board of 49.5 × 45 mm with 33 parts on 36 nets, routed with 209 tracks and 19 vias.
It is built around the ATMEGA328P-AU, CC1101RGP and SN74LVC1T45DBV, with the TLV1117-33DCY among its other parts. Its parts include 14 connectors, 7 capacitors, 4 resistors, 4 ICs and 3 switches. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
SN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTLV1117-33DCY
UncategorisedTexas Instruments
README
PCB644/README.md
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C4, C5, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 10µ | Capacitor_SMD:CP_Elec_4x5.4 | C3, C6 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | VCC | TestPoint:TestPoint_Pad_D2.0mm | J14, J15 |
| 1 | 1µ | Capacitor_SMD:CP_Elec_4x5.3 | C1 |
| 1 | 3V3 PAD | TestPoint:TestPoint_Pad_D2.0mm | J10 |
| 1 | 5V Input | TestPoint:TestPoint_Pad_D2.0mm | J7 |
| 1 | 5V PAD | TestPoint:TestPoint_Pad_D2.0mm | J11 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CC1101 | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | IC1 |
| 1 | Config | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | D1 | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | DIN | TestPoint:TestPoint_Pad_D2.0mm | J12 |
| 1 | DOUT | TestPoint:TestPoint_Pad_D2.0mm | J13 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | J16 |
| 1 | GND Pad | TestPoint:TestPoint_Pad_D2.0mm | J8 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SW2 | Package_TO_SOT_THT:TO-126-2_Vertical | SW2 |
| 1 | SW3 | Package_TO_SOT_THT:TO-126-2_Vertical | SW3 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | WS2812B LED 3V3 Lvl | TestPoint:TestPoint_Pad_D2.0mm | J1 |
| 1 | WS2812B LED 5V Lvl | TestPoint:TestPoint_Pad_D2.0mm | J4 |
| 1 | WS_LED GND | TestPoint:TestPoint_Pad_D2.0mm | J9 |
More from jp112sdl/HB-RC-2-PBU-LED
1Similar boards
- 2 layers218 × 205.7 mm
Middle plate
Froggy111/RBC-soccer-2025
software and hardware for team BotByWire, Robocup Junior Soccer Lightweight 2025
123 parts - 2 layers
- 2 layers51 × 61 mm
- 2 layers17 × 19 mm
- 2 layers20 × 40 mm
HM LC SW1-BA PCB mini MAX1724
der-pw/HM-LC-SW1-BA-PCB_mini_MAX1724
AskSin++ Batterieaktor mit MAX1724 Stepup
30 parts6 - 2 layers200.8 × 100.3 mm
- 2 layers17.8 × 24 mm
HM LC Sw1-Pl DN R1 OBII
der-pw/HM-LC-Sw1-Pl-DN-R1_OBII
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
9 parts3 - 2 layers32.4 × 16.4 mm
Questions
How big is the Hb rc-2-pbu led PCB?
It measures 49.5 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hb rc-2-pbu led use?
33 parts, built around the ATMEGA328P-AU, CC1101RGP, SN74LVC1T45DBV and TLV1117-33DCY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hb rc-2-pbu led KiCad files?
From the jp112sdl/HB-RC-2-PBU-LED repository on GitHub, at the commit this page was made from: the board is PCB/hb-rc-2-pbu-led.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hb rc-2-pbu led design in my own project?
Its repository states no licence, so its author keeps all rights: ask jp112sdl before reusing the design.