2 layers117 × 95 mm
2 layers200.8 × 100.3 mm
HB UNI TEST PROG BOARD V2.2
chianti2000/00-SmartHome3Various SmartHome projects and PCB's
- Size
- 200.8 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 104
- Pads
- 452
- Tracks, vias
- 1,449, 63
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Feb 2021
- Updated
- 8 May 2023
Overview
HB UNI TEST PROG BOARD V2.2 is an open-source printed circuit board by chianti2000, from the chianti2000/00-SmartHome repository on GitHub. It is a 2-layer board of 200.8 × 100.3 mm with 86 parts on 104 nets, routed with 1,449 tracks and 63 vias.
It is built around the ATMEGA1284P-AU, ATMEGA328P-AU and CC1101RGP, with the AMS1117-3.3, LQH43CN100K03L and IRLML5203 among its other parts. Its parts include 20 resistors, 17 capacitors, 12 connectors, 8 switches and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA1284P-AU
TQFP-44(10x10)-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LQH43CN100K03L
181210uH 240mΩ 650mA Wire-wound inductor ±10% 1812 Power Inductors ROHSMurataPower Inductors
IRLML5203
SOT-231 P-Channel 1.25W 165mΩ@4.5V 2.5V 30V 3A 43pF 510pF 71pF 9.5nC@0V P-Channel ±20V SOT-23 MOSFETs ROHSKUUMOSFETs
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6, C7, C8, C9, C10, C11, C12, C14, C15, C18 |
| 8 | SHUNT | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R13, R14, R15, R16, R17, R19 |
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R6, R7, R8, R20 |
| 3 | 1,5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R10, R18 |
| 3 | CONFIG | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4 |
| 3 | CONFIG | Button_Switch_SMD:SW_SPST_FSMSM | SW2, SW3, SW5 |
| 2 | 100µF/16V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1, C3 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C17 |
| 2 | ARDUINO PIN | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J12, J13 |
| 2 | FTDI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5, J10 |
| 2 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7, J11 |
| 2 | Resonator | Crystal:Resonator_SMD-3Pin_7.2x3.0mm | Y1, Y2 |
| 2 | TestPin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP1, TP2 |
| 1 | I-BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | LQH43CN100K03L | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 10µF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 1284 PIN 01-22 | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J6 |
| 1 | 1284 PIN 23-44 | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J8 |
| 1 | 1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13 |
| 1 | 328_PIN 01-16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3 |
| 1 | 328_PIN 17-32 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | ARDUINO_PRO_MINI | ARDUINO_PRO_MINI:MODULE_ARDUINO_PRO_MINI | U6 |
| 1 | ATmega1284P-AU | Package_DIP:DIP-48_W15.24mm_Socket | U4 |
| 1 | ATmega328P-AU | Package_DIP:DIP-32_W15.24mm_Socket | U3 |
| 1 | BOBUINO - GDO0 - STANDARD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP7 |
| 1 | Battery | Homebrew:BATTERY_HOLDER_GOOBAY_AA | BT1 |
| 1 | CC1101 | additional:CC1101_POGOPIN | IC1 |
| 1 | CLOCK | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | CLOCKSEL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | FRQ.-Test | Button_Switch_THT:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW6 |
| 1 | FTDI232_PCB | additional:FTDI232_PCB | U5 |
| 1 | I-1284P | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | I-328P | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | I-ARDUINO | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP10 |
| 1 | I-CC1101 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | I-EXT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | I-I2C | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | I-I2CArd. | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP9 |
| 1 | IRLML5203 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | ISP-Funktion | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW7 |
| 1 | ISP_FKT. | Button_Switch_THT:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW8 |
| 1 | MAX1724 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW4 |
| 1 | USB_B_Micro | additional:USB-MICRO-DIP | J1 |
| 1 | VCC-SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP11 |
More from chianti2000/00-SmartHome
2- 2 layers155.1 × 100.3 mm
Similar boards
- 2 layers48.5 × 48.5 mm
Hb uni-328p small
c-klinger/AskSinPP-PCB
Collection of my PCBs for building custom Homematic devices using AskSin++
44 parts - 2 layers32 × 58 mm
HB UNI Sen CAP MOIST
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
38 parts21 - 2 layers79 × 78 mm
- 2 layers70 × 95.1 mm
- 2 layers61.4 × 103.3 mm
HB Dis EP-42BW
jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic
45 parts18 - 2 layers51 × 51 mm
- 2 layers74.1 × 112 mm
- 2 layers100 × 80 mm
Controller board
WestianPKl/pcb-docs
A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…
114 parts
Questions
How big is the HB UNI TEST PROG BOARD V2.2 PCB?
It measures 200.8 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HB UNI TEST PROG BOARD V2.2 use?
86 parts, built around the ATMEGA1284P-AU, ATMEGA328P-AU, CC1101RGP and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HB UNI TEST PROG BOARD V2.2 KiCad files?
From the chianti2000/00-SmartHome repository on GitHub, at the commit this page was made from: the board is PCB/HB-UNI-TEST-PROG-BOARD/KiCAD/HB-UNI-TEST-PROG-BOARD_V2.2/HB-UNI-TEST-PROG-BOARD_V2.2.kicad_pcb and its schematic PCB/HB-UNI-Sen-POOL/KiCAD/HB-UNI-SEN-POOL_2023_05.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HB UNI TEST PROG BOARD V2.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask chianti2000 before reusing the design.