Skip to the content
2 layers80 × 17 mmPMod Neopixel, the printed circuit board in 3D

PMod Neopixel

jjhorton/PMod4

A selection of Random PMod Boards

Size
80 × 17 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
22
Pads
58
Tracks, vias
58, 23
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Apr 2021
Updated
26 Jun 2025

Overview

PMod Neopixel is an open-source printed circuit board by jjhorton, from the jjhorton/PMod repository on GitHub. It is a 2-layer board of 80 × 17 mm with 15 parts on 22 nets, routed with 58 tracks and 23 vias.

It is built around the WS2812B. Its parts include 10 diodes, 2 resistors and 2 connectors. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

PMod boards

A selection of Random PMod Boards to be used with FPGA's that use the Digilent PMod standard connection

Board Status

The boards in the table are being checked using github actions Kibot for the KiCAD files and also building the example code for each one online. The fabrication files produced using Gitfub actions also includes a PDF of the schematic and GERBER files for getting PCB's built using JLCPCB.

BoardBuild StatusDescription
PMod 7 Segment DisplayPMod 7 Segment DisplayAn 8 digit, 7 segment display
PMod CC1101PMod CC1101sub-1GHz Transceiver board based on a CC1101
PMod GPSPMod GPSA board with a self contained GPS receiver and antenna
PMod Hub75PMod Hub75Forr connection Hub75 display using PMod
PMod Infrared ArrayPMod Infrared Arraycontains an 8x8 IR Thermal sensor
PMod LEDPMod LEDContains 8 LED's which can be individually turned on and off
PMod LED ArrayPMod LED ArrayAn Array of 128 LED in a 8 x 16 array
PMod NeoPixelPMod NeoPixelA board with 10 WS2812 RGB LED's
PMod NeoPixel ArrayPMod Neopixel 8x8 ArrayAn array of 8x8 WS2812B LED's
PMod RGB 7 Segment DisplayPMod RGB 7 Segment DisplayA 4 digit 7 segment display made out of RGB LED's
PMod Test BoardPMod TestAn inline board for debugging

Parts

15
QtyValueFootprintReferences
10WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
20Resistor_SMD:R_0603_1608MetricR1, R2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Conn_02x06_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1
1LOGOjjh:UntitledG***

More from jjhorton/PMod

11
  • 2 layers90.5 × 26.5 mmPMOD LEDArray, the printed circuit board in 3D

    PMOD LEDArray

    jjhorton/PMod

    A selection of Random PMod Boards

    139 parts4
  • 2 layers69 × 80 mmNeopixel Array, the printed circuit board in 3D

    Neopixel Array

    jjhorton/PMod

    A selection of Random PMod Boards

    132 parts4
  • 4 layers100 × 38 mmPMod RGB7Segment, the printed circuit board in 3D

    PMod RGB7Segment

    jjhorton/PMod

    A selection of Random PMod Boards

    122 parts4
  • 2 layers25.5 × 61 mmPMod LED, the printed circuit board in 3D

    PMod LED

    jjhorton/PMod

    A selection of Random PMod Boards

    93 parts4
  • 2 layers45 × 40 mmPMod Hub75, the printed circuit board in 3D

    PMod Hub75

    jjhorton/PMod

    A selection of Random PMod Boards

    31 parts4
  • 4 layers40.5 × 17 mmCc1101, the printed circuit board in 3D

    Cc1101

    jjhorton/PMod

    A selection of Random PMod Boards

    19 parts4
  • 2 layers40 × 17.5 mmPMod Tester, the printed circuit board in 3D

    PMod Tester

    jjhorton/PMod

    A selection of Random PMod Boards

    18 parts4
  • 2 layers50 × 18 mmPMod Infrared Array, the printed circuit board in 3D

    PMod Infrared Array

    jjhorton/PMod

    A selection of Random PMod Boards

    17 parts4
  • 2 layers100 × 19.5 mmPMod 7Segement, the printed circuit board in 3D

    PMod 7Segement

    jjhorton/PMod

    A selection of Random PMod Boards

    9 parts4
  • 4 layers29 × 22 mmStepAttenuator, the printed circuit board in 3D

    StepAttenuator

    jjhorton/PMod

    A selection of Random PMod Boards

    7 parts4
  • 2 layers47 × 17 mmPMod GPS, the printed circuit board in 3D

    PMod GPS

    jjhorton/PMod

    A selection of Random PMod Boards

    5 parts4

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the PMod Neopixel PCB?

It measures 80 × 17 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PMod Neopixel use?

15 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PMod Neopixel KiCad files?

From the jjhorton/PMod repository on GitHub, at the commit this page was made from: the board is PMod_Neopixel/Hardware/Strip/PMod_Neopixel.kicad_pcb and its schematic PMod_7Segment/hardware/PMod_7Segement.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PMod Neopixel design in my own project?

Its repository states no licence, so its author keeps all rights: ask jjhorton before reusing the design.