2 layers247.9 × 104.5 mm
2 layers285.5 × 95 mm
Reviung46 ver1 1
gtips/reviung517The REVIUNG41 is 41-key column staggered keyboard.
- Size
- 285.5 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 78
- Pads
- 541
- Tracks, vias
- 1,062, 156
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Jul 2019
- Updated
- 25 Sep 2024
Overview
Reviung46 ver1 1 is an open-source printed circuit board by gtips, from the gtips/reviung repository on GitHub, published under the MIT licence. It is a 2-layer board of 285.5 × 95 mm with 119 parts on 78 nets, routed with 1,062 tracks and 156 vias.
It is built around the 1N4148W and WS2812B. Its parts include 51 switches, 46 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdREVIUNG
REVIUNG41
The REVIUNG41 is 41-key column staggered keyboard.
REVIUNG39 Mk-II, REVIUNG39 and REVIUNG39S
The REVIUNG39 is 39-key column staggered keyboard.
Soldering is divided into through-hole mounting version and surface mounting (SMD) version so that the soldering difficulty can be selected.
- REVIUNG39 Mk-II and REVIUNG39 is regular version (SMD)
- REVIUNG39S is simple version (through-hole)
REVIUNG39 Build guide
Firmware
REVIUNG34
The REVIUNG34 is 34-key (or33-key) column staggered keyboard.
REVIUNG34 Build guide
Firmware
REVIUNG5
The REVIUNG5 is 5-key (or 4-key + Rotary Encoder) macropad.
REVIUNG34 SPLIT Mk-II and REVIUNG34 SPLIT
The REVIUNG34 is 34-key split ortholinear keyboard.
(REVIUNG34 SPLIT Mk-II is 34-key or 33-key)
Use a LAN cable to connect the left and right keyboards.
Firmware
REVIUNG34 SPLIT Build guide
REVIUNG33
The REVIUNG33 is 33-key ortholinear keyboard.
REVIUNG53
The REVIUNG53 is 53-key keyboard.
REVIUNG61
Standard ANSI 60% keyboard. And compatible with MX and ALPS.
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | 1N4148W | _reviung-kbd:D3_SMD_1side | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +30 |
| 33 | 1U | _reviung-kbd:MXOnly-1U-Hotswap | SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW27, SW28, SW29 +17 |
| 10 | WS2812B | _reviung-kbd:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm_BigFoot | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8, RGB9, RGB10 |
| 5 | 1.25U | _reviung-kbd:MXOnly-1.25U-Hotswap | SW7, SW24, SW39, SW48, SW49 |
| 4 | 1.5U | _reviung-kbd:MXOnly-1.5U-Hotswap | SW1, SW23, SW32, SW50 |
| 4 | Val** | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | Ref**, Ref**, Ref**, Ref** |
| 2 | 1.75U | _reviung-kbd:MXOnly-1.75U-Hotswap | SW8, SW46 |
| 2 | 2.75U | _reviung-kbd:MXOnly-2.75U-Hotswap-ReversedStabilizers | SW45, SW47 |
| 1 | 2.25U | _reviung-kbd:MXOnly-2.25U-Hotswap | SW25 |
| 1 | 2.25U | _reviung-kbd:MXOnly-2.25U-Hotswap-ReversedStabilizers | SW38 |
| 1 | 2U | _reviung-kbd:MXOnly-2U-Hotswap-ReversedStabilizers | SW15 |
| 1 | 6.25U | _reviung-kbd:MXOnly-6.25U-Hotswap-ReversedStabilizers | SW26 |
| 1 | LOGO | _reviung-kbd:R-x4-ver1 | G*** |
| 1 | LOGO | _reviung-kbd:QMK-x4-ver1 | G*** |
| 1 | ProMicro | _reviung-kbd:ProMicroExtentionBard | U1 |
| 1 | SW_PUSH | _reviung-kbd:ResetSW_1side | SW51 |
The 114 most common of 119 parts.
More from gtips/reviung
3- 2 layers100 × 100 mm
- 2 layers285.5 × 95 mm
Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers309.9 × 119.8 mm
Cockpit
ozkan/Cockpit-Keyboard
A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.
144 parts43MIT - 2 layers233.7 × 91.5 mm
Skywatch
ozkan/skywatch
35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support
133 parts41MIT - 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers247.7 × 127 mm
Euclid36
sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions
130 parts24 - 2 layers356.4 × 105.3 mm
- 2 layers260.9 × 107.2 mm
ReviungDash
tumler/ReviungDash
Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards
126 parts19MIT - 2 layers266.7 × 77 mm
KB Lightbar 1 straight
melonbred/open-source-projects
This is a repository for all open-sourced or available files for my projects. PCBs will typically have their own repository linked in the table below.
146 parts16MIT
Questions
How big is the Reviung46 ver1 1 PCB?
It measures 285.5 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Reviung46 ver1 1 use?
119 parts, built around the 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Reviung46 ver1 1 KiCad files?
From the gtips/reviung repository on GitHub, at the commit this page was made from: the board is reviung46/pcb/reviung46_ver1_1/reviung46/reviung46.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Reviung46 ver1 1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).