
ReviungDash
tumler/ReviungDash
Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards

Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards
ReviungDash is an open-source printed circuit board by tumler, from the tumler/ReviungDash repository on GitHub, published under the MIT licence. It is a 2-layer board of 260.9 × 107.2 mm with 126 parts on 81 nets, routed with 1,221 tracks and 207 vias.
It is built around the 1N4148W and WS2812B. Its parts include 49 switches, 48 diodes, 11 inductors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.



The REVIUNGDASH47 is 47/8 key column staggered keyboard. Inspired by the Reviung41 (& ERGODASH) hence the name!


The REVIUNGDASH52 is a 52 key column staggered keyboard. Based on the REVIUNGDASH47 but with a larger thumb cluster.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 1N4148W | _reviung-kbd:D3_SMD_1side | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 47 | SW_PUSH | _reviung-kbd:MXOnly-1U-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +31 |
| 11 | WS2812B | _reviung-kbd:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11 |
| 1 | H1 | _reviung-kbd:HOLE | H1 |
| 1 | H10 | _reviung-kbd:HOLE | H10 |
| 1 | H11 | _reviung-kbd:HOLE | H11 |
| 1 | H12 | _reviung-kbd:HOLE_2.2mm | H12 |
| 1 | H13 | _reviung-kbd:HOLE_2.2mm | H13 |
| 1 | H14 | _reviung-kbd:HOLE_2.2mm | H14 |
| 1 | H2 | _reviung-kbd:HOLE | H2 |
| 1 | H3 | _reviung-kbd:HOLE | H3 |
| 1 | H4 | _reviung-kbd:HOLE | H4 |
| 1 | H5 | _reviung-kbd:HOLE | H5 |
| 1 | H6 | _reviung-kbd:HOLE | H6 |
| 1 | H7 | _reviung-kbd:HOLE | H7 |
| 1 | H8 | _reviung-kbd:HOLE | H8 |
| 1 | H9 | _reviung-kbd:HOLE | H9 |
| 1 | LOGO | library:Logo_Black_small | G*** |
| 1 | LOGO | _reviung-kbd:QMK-x4-ver1 | G*** |
| 1 | ProMicro | _reviung-kbd:ProMicro | U1 |
| 1 | SW_2U_PUSH | _reviung-kbd:MXOnly-1U-Hotswap | SW39 |
| 1 | SW_PUSH | _reviung-kbd:MXOnly-2U-Hotswap-ReversedStabilizers | SW37 |
| 1 | SW_PUSH | _reviung-kbd:ResetSW_1side | RESET1 |

tumler/ReviungDash
Single Body Mechanical Keyboard inspired by the Reviung and Ergodash keyboards

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


ozkan/Cockpit-Keyboard
A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.

ozkan/skywatch
35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support

NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software

sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions


melonbred/open-source-projects
This is a repository for all open-sourced or available files for my projects. PCBs will typically have their own repository linked in the table below.
It measures 260.9 × 107.2 mm and has 2 copper layers, 1.6 mm thick.
126 parts, built around the 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tumler/ReviungDash repository on GitHub, at the commit this page was made from: the board is reviungdash47/pcb/reviungdash.kicad_pcb and its schematic reviungdash47/pcb/reviungdash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).