Skip to the content
2 layers47 × 17 mmPMod GPS, the printed circuit board in 3D

A selection of Random PMod Boards

Size
47 × 17 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
21
Pads
37
Tracks, vias
40, 16
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Apr 2021
Updated
26 Jun 2025

Overview

PMod GPS is an open-source printed circuit board by jjhorton, from the jjhorton/PMod repository on GitHub. It is a 2-layer board of 47 × 17 mm with 5 parts on 21 nets, routed with 40 tracks and 16 vias.

It is built around the NEO-M8M. Its parts include 1 IC and 1 connector. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

PMod boards

A selection of Random PMod Boards to be used with FPGA's that use the Digilent PMod standard connection

Board Status

The boards in the table are being checked using github actions Kibot for the KiCAD files and also building the example code for each one online. The fabrication files produced using Gitfub actions also includes a PDF of the schematic and GERBER files for getting PCB's built using JLCPCB.

BoardBuild StatusDescription
PMod 7 Segment DisplayPMod 7 Segment DisplayAn 8 digit, 7 segment display
PMod CC1101PMod CC1101sub-1GHz Transceiver board based on a CC1101
PMod GPSPMod GPSA board with a self contained GPS receiver and antenna
PMod Hub75PMod Hub75Forr connection Hub75 display using PMod
PMod Infrared ArrayPMod Infrared Arraycontains an 8x8 IR Thermal sensor
PMod LEDPMod LEDContains 8 LED's which can be individually turned on and off
PMod LED ArrayPMod LED ArrayAn Array of 128 LED in a 8 x 16 array
PMod NeoPixelPMod NeoPixelA board with 10 WS2812 RGB LED's
PMod NeoPixel ArrayPMod Neopixel 8x8 ArrayAn array of 8x8 WS2812B LED's
PMod RGB 7 Segment DisplayPMod RGB 7 Segment DisplayA 4 digit 7 segment display made out of RGB LED's
PMod Test BoardPMod TestAn inline board for debugging

Parts

5
QtyValueFootprintReferences
1Antennajjh:W3213AE1
1Conn_02x06_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1
1LOGOjjh:UntitledG1
1LOGOjjh:j2h_smallG***
1NEO-M8MRF_GPS:ublox_NEOU1

More from jjhorton/PMod

11
  • 2 layers90.5 × 26.5 mmPMOD LEDArray, the printed circuit board in 3D

    PMOD LEDArray

    jjhorton/PMod

    A selection of Random PMod Boards

    139 parts4
  • 2 layers69 × 80 mmNeopixel Array, the printed circuit board in 3D

    Neopixel Array

    jjhorton/PMod

    A selection of Random PMod Boards

    132 parts4
  • 4 layers100 × 38 mmPMod RGB7Segment, the printed circuit board in 3D

    PMod RGB7Segment

    jjhorton/PMod

    A selection of Random PMod Boards

    122 parts4
  • 2 layers25.5 × 61 mmPMod LED, the printed circuit board in 3D

    PMod LED

    jjhorton/PMod

    A selection of Random PMod Boards

    93 parts4
  • 2 layers45 × 40 mmPMod Hub75, the printed circuit board in 3D

    PMod Hub75

    jjhorton/PMod

    A selection of Random PMod Boards

    31 parts4
  • 4 layers40.5 × 17 mmCc1101, the printed circuit board in 3D

    Cc1101

    jjhorton/PMod

    A selection of Random PMod Boards

    19 parts4
  • 2 layers40 × 17.5 mmPMod Tester, the printed circuit board in 3D

    PMod Tester

    jjhorton/PMod

    A selection of Random PMod Boards

    18 parts4
  • 2 layers50 × 18 mmPMod Infrared Array, the printed circuit board in 3D

    PMod Infrared Array

    jjhorton/PMod

    A selection of Random PMod Boards

    17 parts4
  • 2 layers80 × 17 mmPMod Neopixel, the printed circuit board in 3D

    PMod Neopixel

    jjhorton/PMod

    A selection of Random PMod Boards

    15 parts4
  • 2 layers100 × 19.5 mmPMod 7Segement, the printed circuit board in 3D

    PMod 7Segement

    jjhorton/PMod

    A selection of Random PMod Boards

    9 parts4
  • 4 layers29 × 22 mmStepAttenuator, the printed circuit board in 3D

    StepAttenuator

    jjhorton/PMod

    A selection of Random PMod Boards

    7 parts4

Similar boards

  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 2 layers65 × 120 mmNomad, the printed circuit board in 3D

    Nomad

    0Zane/Nomad

    One Adventure - One device,Nomad is a custom outdoor mobile device built around the ESP32-S3. It is designed for explorers, researchers, and outdoor enthusiasts who need reliable positioning, long-range communication…

    81 parts17MIT
  • 4 layers129 × 79.8 mmRc car, the printed circuit board in 3D

    Rc car

    alaotach/rc-car

    Quixie is a small autonomous RC delivery car. The custom PCB handles motor control and sensor expansion; the firmware manages navigation, telemetry, and the locking cargo bay.

    86 parts2
  • 2 layers65 × 40 mmScl3300-evb, the printed circuit board in 3D

    Scl3300-evb

    anyshake/scl3300-d01-evb

    🍥 SCL3300-D01 accelerometer EVB with GNSS and EEPROM for testing purpose.

    67 parts1
  • 2 layers45 × 172 mmPh portable refrigerator v2 hw, the printed circuit board in 3D

    Ph portable refrigerator v2 hw

    Blackcastus/ESP32_A7670

    To make it easy for you to get started with GitLab, here's a list of recommended next steps.

    188 parts
  • 4 layers70 × 50 mmTimekeeper, the printed circuit board in 3D

    Timekeeper

    liam-tirpitz/TickTock

    A custom ESP32-based clock platform driving WS2812B/NeoPixel LED displays. Firmware and PCB are display-agnostic, supporting any addressable LED clock with minimal adjustments.

    57 parts

Questions

How big is the PMod GPS PCB?

It measures 47 × 17 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PMod GPS use?

5 parts, built around the NEO-M8M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PMod GPS KiCad files?

From the jjhorton/PMod repository on GitHub, at the commit this page was made from: the board is PMod_GPS/Hardware/PMod_GPS.kicad_pcb and its schematic PMod_7Segment/hardware/PMod_7Segement.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PMod GPS design in my own project?

Its repository states no licence, so its author keeps all rights: ask jjhorton before reusing the design.