Skip to the content
2 layers65 × 40 mmScl3300-evb, the printed circuit board in 3D

🍥 SCL3300-D01 accelerometer EVB with GNSS and EEPROM for testing purpose.

Size
65 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
79
Pads
255
Tracks, vias
462, 138
Pours
113
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Apr 2026
Updated
11 Oct 2026

Overview

Scl3300-evb is an open-source printed circuit board by anyshake, from the anyshake/scl3300-d01-evb repository on GitHub. It is a 2-layer board of 65 × 40 mm with 67 parts on 79 nets, routed with 462 tracks and 138 vias.

It is built around the NEO-M8M, CH340N and AMS1117-3.3, with the AT24CS08-SSHM-T, SCL3300-D01 and SS34 among its other parts. Its parts include 20 capacitors, 13 resistors, 7 ICs, 7 diodes and 5 connectors. It belongs with the STM32 boards of this library.

Main components

7

README

README.md

scl3300-d01-evb

🍥 SCL3300-D01 accelerometer EVB with GNSS and EEPROM for testing purpose.

Parts

67
QtyValueFootprintReferences
150.1uFCapacitor_SMD:C_0603_1608MetricC1, C3, C5, C8, C9, C10, C11, C12, C13, C14, C16, C17, C18, C19, C20
41kResistor_SMD:R_0603_1608MetricR4, R7, R8, R9
4MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4
310kResistor_SMD:R_0603_1608MetricR11, R12, R13
3YellowLED_SMD:LED_0603_1608MetricD5, D6, D7
2100pFCapacitor_SMD:C_0603_1608MetricC4, C6
24.7kResistor_SMD:R_0603_1608MetricR5, R6
25.1kResistor_SMD:R_0603_1608MetricR1, R2
2SS34Diode_SMD:D_SMAD1, D2
10Resistor_SMD:R_0603_1608MetricR3
10.01uFCapacitor_SMD:C_0603_1608MetricC15
110Resistor_SMD:R_0603_1608MetricR10
110uFCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-TC2
11uHInductor_SMD:L_0603_1608MetricL1
122uFCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-TC7
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1AT24CS08-SSHMPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1BOOT0Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1BOOT1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1CH340NPackage_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mmU5
1DMS3R3Battery:BatteryHolder_Seiko_MS621FBT1
1GNSS_1PPSTestPoint:TestPoint_Pad_D1.0mmTP3
1GNSS_RXDTestPoint:TestPoint_Pad_D1.0mmTP1
1GNSS_TXDTestPoint:TestPoint_Pad_D1.0mmTP2
1GREENLED_SMD:LED_0603_1608MetricD4
1NEO-M8MRF_GPS:ublox_NEOU1
1OPTIONSButton_Switch_SMD:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfileSW3
1RESETButton_Switch_THT:SW_PUSH_6mmSW1
1RXDTestPoint:TestPoint_Pad_D1.0mmTP4
1SAMPLERATEButton_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfileSW2
1SCL3300-D01evb:DFL-12_L8.6-W7.0-P1.00-LS7.6-BLU4
1SG-8002CA 8M-PCML0Oscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mmY1
1SMAConnector_Coaxial:SMA_Amphenol_901-144_VerticalJ1
1SMAJ5.0ADiode_SMD:D_SMAD3
1SSD1306Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU7
1STLINKConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1STM32F103C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU6
1TXDTestPoint:TestPoint_Pad_D1.0mmTP5
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AP1

Similar boards

  • 2 layers100 × 100 mmExplorer, the printed circuit board in 3D

    Explorer

    anyshake/explorer

    🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

    266 parts100
  • 4 layers90 × 61.5 mmPM Controller, the printed circuit board in 3D

    PM Controller

    ZeshuLiu/PolaMiyaHardware

    132 parts1
  • 2 layers45 × 172 mmPh portable refrigerator v2 hw, the printed circuit board in 3D

    Ph portable refrigerator v2 hw

    Blackcastus/ESP32_A7670

    To make it easy for you to get started with GitLab, here's a list of recommended next steps.

    188 parts
  • 2 layers80 × 80 mmDcclicht, the printed circuit board in 3D

    Dcclicht

    eurovibes/dcclicht

    A DCC LED/light control board

    110 partsCERN-OHL-S-2.0
  • 4 layers100 × 80 mmAuraForge-50X, the printed circuit board in 3D

    AuraForge-50X

    RaviKachhwaha/AuraForge-50X

    A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…

    83 parts
  • 2 layers89.5 × 51.2 mmWMRPControllerBoard, the printed circuit board in 3D

    WMRPControllerBoard

    ekihorf/WRMPController

    Controller for Weller WMRP soldering iron

    41 parts1
  • 2 layers51.5 × 64.7 mmMuHack SAO 10th, the printed circuit board in 3D

    MuHack SAO 10th

    MrMoDDoM/MuHack_SAO_10th

    Repo for the commemorative MuHack SAO fot the 10th anniversary

    21 partsAGPL-3.0
  • 4 layers85 × 170 mmPowerSupplyModule, the printed circuit board in 3D

    PowerSupplyModule

    pelectron/PowerSupplyModule

    277 partsApache-2.0

Questions

How big is the Scl3300-evb PCB?

It measures 65 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Scl3300-evb use?

67 parts, built around the NEO-M8M, CH340N, AMS1117-3.3 and AT24CS08-SSHM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Scl3300-evb KiCad files?

From the anyshake/scl3300-d01-evb repository on GitHub, at the commit this page was made from: the board is hardware/scl3300-evb.kicad_pcb and its schematic hardware/scl3300-evb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Scl3300-evb design in my own project?

Its repository states no licence, so its author keeps all rights: ask anyshake before reusing the design.